Chapter
Scaling of Precipitated Structure in Al-Zn Alloys
The Present Status of Al-Li Based Alloys
Aluminium Alloys under High Hydrostatic Pressure
The Structure of DC Cast Al-Fe and Al-Fe-Si Alloys
AlFe and AlFeSi Intermetallic Phases in Aluminium Alloys
Mechanical Properties of AlZnMg Alloys
Strength and Toughness of High-Strength Al-Alloys
The Fatigue Properties of Precipitation-Hardened Aluminium Alloys
Role of Trace Elements in Aged Aluminium-Alloys
Atom-Probe Field-Ion Microscope Studies on Age-Hardenable Aluminium Alloys
Pair Potential Model for α-Phase Stability in the Binary System Al-Zn
Detection of the Spinodal Temperature by Resistivity Measurements in an Al-Zn 32 wt % Alloy
Anelastic Effects due to Precipitation and Dissolution in some Al Alloys
On the Existence Field of GP Zones in Al-Zn Alloys
On the Decomposition Behaviour of Al-4.8wt%Zn-2.3wt%Mg Alloy during Continuous Heating
Heterogeneous Nucleation of Precipitates in the Grain Boundary Regions of an AlZnMg Alloy
Theoretical Investigations on the Resistivity of Decomposing Al Alloys
Theoretical Consideration on Ostwald Ripening of Precipitates in Supersaturated Alloys
Small Angle Neutron Scattering Investigation of Mg2Si Precipitates in a Single Crystal of an Al-Mg-Si Alloy
A Differential Scanning Calorimetry Investigation of the Black Spot Defect in Anodised Extrusions of an Al-Mg-Si Alloy(AA6063)
Precipitation Growth and Dissolution in Aluminium-Iron Alloys
Mössbauer Study of Phase Transformation in an Al-Rich Al-Fe Alloy
Mössbauer Investigation of Al-Fe-Si Phases in Aluminium
Mössbauer Study of Al57Fe Alloys Irradiated with Energetic Heavy Ions
On the Phase Diagrams of the Al-Fe and Al-Fe-Si Systems
Recrystallization in Supersaturated Al-Fe, Al-Si and Al-Fe-Si Alloys: A Differential Scanning Calorimetry Study
Effect of Heat Treatment on the Microstructure of Cast Al-Fe-Si Alloys
The Microstructure of Al-Fe-Si, Al-Fe-Mn-Si and Al-Fe-Mn-Mg-Si Rolling Ingots in Dependence on Homogenization and Preheating Temperature
Structure of High Purity Cast Al-Mn and Al-Mn-Fe Alloys
Effect of Cold Rolling on the Exoelectron Emission from Industrial Age Hardened Aluminium Alloys
Investigation of Microstructure and Mechanical Properties of Zn-Al Alloys
Precipitation Processes in Al-Cu-Li Alloy Studied by DSC
Young's Modulus of Elasticity of Al-Zn2Mg Alloys in Dependence on the Precipitation Structure
The Plastic Behaviour and the Microstructure of an Al - 4.5wt%Zn - 1.5wt%Mg Alloy
Influence of Inherent Dispersoids on Cold Deformation Substructure in AlZnMgCu-Alloys
The Cyclic Crack Propagation Behaviour of a Hardenable Polycrystalline Al-Mg-Sc Alloy
The Influence of Heat Treatment on the Notch-Fatigue Behaviour of 6005A
High Temperature Plasticity of Al Alloys Investigated by Impression Creep Test
Superplasticity of AlZnMgFe Alloys Investigated by Different Methods of Deformation
Investigation of the Microstructure of an Al-Zn-Mg Alloy during Superplastic Deformation
Bulging Test of Superplastic Al Alloys
Structure Changes during Creep of the Al-30wt%Zn Alloy
Effect of Structure on Creep Behaviour of the Al-30wt%Zn Alloy at 220°C
New Results about the Formation of Slip Bands by Quenching in Al-Zn Alloys
Quenched-In Dislocation Loops in Al-Zn-Mg Alloys
Enhanced Precipitation in Age Hardenable Aluminum Alloys: Role of Nucleation Entropy
The Effect of Mn Addition and the Quenching Rate on the Properties of an AlMgSi1 Alloy
The Effect of Scandium Addition on the Mechanical Properties of Pure Aluminium and of an AlMg6 Alloy
Kinetic Studies on the Precipitate-Free Zones in Al-Ag and AL-Zn-Mg Alloys
Positron Annihilation and Mössbauer Spectroscopy Studies of Vacancy-Impurity Interaction in Dilute Al-Sn Alloys
On the Volume and Grain-Boundary Diffusion of 3d-Transition Elements in Al and Al-Alloys
Temperature and Concentration Dependence of the Thermo-Electric Power in AlMn and AlCr Alloys
Solid Solubility Trends in Binary Aluminium Alloys
Impurity Diffusion of Manganese in Aluminum
Numerical Calculation of the Concentration Distribution during the Solidification of Binary Alloys Allowing for Dendrite Arm Coarsening
Rapidly Quenched Al-5.3 at % Mn Alloy Containing Quasicrystal Units
Rapidly Solidified AL-Fe-Ni Ribbons and Their Characterization
Microstructure of Rapidly Solidified AL-Cu-Mn and AL-Mg-Zn-Mn Alloys
Effect of Mechanical Properties on the Reliability of Structural Aluminium Components
Heat-Treatments of High-Strength Aluminium Screws
Economic Heat Treatment of Cast Al-Si Pistons Satisfying Specified Critical Properties
Age-Hardenable Aluminium Alloys
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
