Chapter
Molecular Design of a Speciality Polyester for Potential Use as a Fast-Absorbable Monofilament Surgical Suture
The Fabricated Collagen-Based Nano-Hydroxyapatite/β-Tricalcium Phosphate Scaffolds
Effect of Apatite Precipitation on Failure Behavior of Hydroxyapatite Coating Layer on Titanium Substrate
Fatigue Behavior and Apatite Precipitation of Plasma-Sprayed HAp Coating on Commercially Pure Titanium Substrate in Simulated Body Fluid (SBF)
Biomass-Based Sulfonic-Functionalized Carbon Solid Acid for Esterification of Acetic Acid
Preparation and Characterization of Modified Biphasic Calcium Phosphate Ceramics
Hydrothermal Synthesis of Zinc Oxide Nanoparticle from Zinc-Dust Waste for Photocatalytic and Antibacterial Applications
Influence of the Substrate Bias Voltage on the Structure of Rutile TiO2 Films Prepared by Dual Cathode DC Unbalanced Magnetron Sputtering
Synthesis of Nanocrystalline β-Tricalcium Phosphate from Chicken Eggshells by Precipitation Method
Characterization of Apatite from Human Teeth via XRD, FT-IR and TGA Techniques
Sonochemical Synthesis of Zn3(PO4)2.4H2O and Zn3(PO4)2 Powders
Statistical Optimization of Esterification Reaction to Produce Biodiesel from the Mixture of PFAD and Palm Stearin Oil Using Two-Step Reaction
Blood Circulation Network Incorporation an Artificial Bone for Real Time Operation
Effect of Apatite Wollastonite Glass Ceramic Addition on Brushite Bone Cement Containing Chitosan
Synthesis, Processing and Testing of a Poly (DL-Lactide-co-ε-Caprolactone) Resorbable Electrospun Membrane for Guided Tissue Regeneration
Attachment and Proliferation of Cultured Human Periodontal Ligament Cells on 75:25 Poly (DL-Lactide-co-ε-Caprolactone) Electrospun Resorbable Membrane
Preparation of Chitosan-Thiamine Pyrophosphate/Polyvinyl Alcohol Blend Electrospun Nanofibers
Stability and Cytotoxicity of Well-Dispersed Magnetite Nanoparticles Prepared by Hydrothermal Method
Properties of Poly(lactic acid) (PLA)/Poly(butylene adipate-co-terephthalate) (PBAT) Blends in the Presence of Antioxidant
Preparation and Characterization of Biopolymer Film from Pomelo Pectin and Flour
Association Behavior of the Synthetic Protein-Lipid Complex Analogues
Spontaneous Calcium Deposition in the Scaffolds from Human Dermal Solutions
Comparison of Metal Alkoxide Initiators in the Ring-Opening Polymerization of Caprolactone
Apatite-Wollastonite Bioactive Glass-Ceramic Scaffolds for Hard Tissue Engineering
Magnesium Substitution in Hydroxyapatite Synthesized by Sol-Gel Method
Lipase-Catalysed Polymerization of Lactic Acid and the Properties of the Polymer
1H-NMR Analysis of Degree of Substitution in N,O-Carboxymethyl Chitosans from Various Chitosan Sources and Types
Development of NLCs for Topical ATRAs Applications
Effect of BaZr0.05Ti0.95O3 Addition on Microstructure and Piezoelectric Properties of Hydroxyapatite Bone
Phase Formation of Hydroxyapatite Particles at Different Calcination Temperatures
Characteristics of 45S5 Bioglass-Ceramics Using Natural Raw Materials
Synthesis and Characterisation of PLA-CO-PEG Copolymers
Simplified Qualitative Analysis of Glycerides Derived from Coconut Oil Using Thin Layer Chromatography
Formation and Characterization of Shellac Phthalate Succinate through Organic Solvent-Free Reaction
Property Development of Hydroxyapatite Ceramics by Two-Step Sintering
Tyrosinase Inhibitory Activity of Pyrazole Derivatives
The Preparation and Morphology of Biphasic Calcium Phosphate Ceramics
Determination the Effect of Silver Nanoparticles on Gram-Positive Bacterial Cells by Atomic Force Microscopy
Synthesis and Characterization of Pure Natural Hydroxyapatite from Fish Bones Bio-Waste
Structural Analysis of Strontium-Substituted Hydroxyapatites
Production and Characterization of Activated Carbon from Waste Tire by H3PO4 Treatment for Ethylene Adsorbent Used in Active Packaging
Synthesized Silica Powder from Rice Husk for Printing Raw Materials Application
Resonance Raman Enhancement of the ν4 Band in Fe (TMPP)Cl at NIR Laser Excitation Attributed to Supramolecular Interaction
Preparation of Polycaprolactone/Ethanolic Extract Propolis Nanofibers Films
Preparation of Glutinous Rice Starch Nanofibers by Electrospinning
Effect of Metal Oxide Nanoparticles Addition on Physical Properties of Hydroxyapatite
Properties of Porous Alumina Fabricated by Ceramic Injection Moulding Using Environmentally Friendly Binder
Factors Influencing the Morphology of Cellulose Acetate Electrospun Fiber Mats
Combination Effects of the Antimicrobial Agents and Cinnamon Oil
A New Approach for the Preparation of Bleached Shellac for Pharmaceutical Application: Solid Method
Preparation of Nanosilver Loaded Calcium Phosphate by In Situ Phase Conversion Process
Molecular Dynamics Study of DNA Duplex Containing Carbazole-Derived Universal Base
Effect of Crystalline Morphology on Mechanical Properties of PPB Polymer Nanofiber Composite
Effect of Galactomannan on the Dynamic Properties of Xyloglucan Aqueous Solution
Determination of Surface Free Energy and Contact Angle for Hydrolyzed Shellac
Comparison of In Vitro Binding of Bile Salt by Pectins from Various Sources
Thermal Analysis of Chitosan-Lactate and Chitosan-Aluminum Monostearate Composite System
Drug-Loaded Pectin Microparticles Prepared by Emulsion-Solvent Evaporation
Pectin-Based Nano-Sized Emulsions Prepared by High-Pressure Homogenization
Design of Shellac-Based Film with Improved Mechanical Properties through Composite Formation with Clay
Effect of Ultrasonic Treatment on Physical Properties of Tapioca Starch
Heterocoaggulation of Natural Rubber Latex and Poly [Styrene-co-2-(Methacryloyloxy) Ethyl Trimethylammonium Chroride] Nanoparticles
Preparation of Poly(l-lactic acid) Capsule Encapsulating Fertilizer
Physical Stabilizing Effect of Biopolymers on Solid Dispersions Containing Indomethacin and Polyethylene Glycol
Development of Biodegradable Films Based on Durian Seed Starch
Design and Preparation of Synthetic Hydrogels by Redox Initiation via Free Radical Polymerisation for Biomedical Use as Wound Dressings
Effect of Zein Concentration on the Formation of Pectin-Zein Complexes
Compostability and Ecotoxicity of Poly(lactic acid) and Starch Blends
The Ultimate Biodegradation of the Starch Based Biodegradable Plastics
Study of the Disintegration of Poly (butylene adipate-co-terephthalate) and Starch Co-Extruded Materials
In Situ Crosslinkable Thiolated Chitosan as Scaffold Material for Tissue Engineering
Development of Soaps Containing Betel Nut Extract
Surface Tension and Viscosity of Herbal Massage Oil
Non-Aqueous Virgin Coconut Oil Hair Gel
Instant Powder of Malabar Tamarind Fruit Extract Prepared by Foam-Mat Method
Menthol, Borneol, Camphor and WS-3 Eutectic Mixture
A Novel Silk Sericin/Poly (Vinyl Alcohol) Composite Film Crosslinked with Genipin: Fabrication and Characterization for Tissue Engineering Applications
Structural and Textural of Marine Mollusc Shell
Release of Growth Factor from Platelet-Rich Fibrin and its Stability in Sinus Lifting in Minipigs
Ultrasonic Extraction of Thai Propolis for Antimicrobial and Antioxidant Properties
Formulation Development of Gel-Based Lipstick Containing Longan Honey and Natural Color Extracted from Sappan Wood and Roselle
III. Applications of Biomaterial
Assessment of Physical, Mechanical and Biological Properties of Thai Silk Fibroin Vascular Scaffold
The Gelation Study of Silk Fibroin for Biomedical Application
Preparation of Zingiber officinale Extract Loaded Solid Lipid Nanoparticles
Chemical Composition of Essential Oil and Antioxidant Activities of Curcuma petiolata Roxb. Rhizomes
Natural Polysaccharide-Based Films and their Antibacterial Activities
Characterization of Konjac Glucomannan Film Containing the Extracts of Atractylodes lancea and Saussurea lappa
Gold Recovery from Aqueous Solutions Using Bioadsorbent Synthesized from Rambutan Peel
Film Formation of Inclusion Complexes between Acetyl-Beta-Cyclodextrin and Chitosan
Arsenic Removal by Precipitation with Calcium Phosphate Hydroxyapatite
Characterization of Chitosan and Carboxymethyl Chitosan Films from Various Sources and Molecular Sizes
Factors Affecting Design of Shellac-Based Matrix Tablet through Annealing Process
Characterization and Adsorption Efficiency of the Natural and the Modified Diatomite via the Low Temperature Hydrothermal Route
Effect of Coconut Oil and Surfactants on Stability of Nanoemulsions
The Influence of Cyclodextrin and pH on the Solubility of Ketoprofen
Effect of Crosslinking Time on Ion Exchange Capacity of Polystyrene Nanofiber Ion Exchangers
Development of Ketoprofen Microemulsion for Transdermal Drug Delivery
Effect of Acyl Chain Length of Spermine Derivatives on Transfection Efficiency
Effect of Limonene and 1,8 Cineole on the Skin Penetration of Fluorescein Sodium Deformable Liposomes
Thermal Insulation Produced from Pineapple Leaf Fiber and Natural Rubber Latex
Effect of Surfactants on Characteristic and In Vitro Release of Meloxicam Loaded in Deformable Liposomes
Cream Stick Containing Natural Oil for Cracked Heel
Application of Methylated N-(4-N,N-Dimethylaminocinnamyl) Chitosan for Oral Protein Drug Delivery
Chitosan Coated Alginate Microparticles for Oral Vaccine Delivery
Rapidly Dried Antimicrobial Spray for Foot Deodorant
Customized Three Dimensional Printed Porous Polyethylene for Calvarial Reconstruction
Comparison of Vehicles for Vancomycin Drug Delivery in Extemporaneously Prepared Ophthalmic Solutions
Mechanisms of Cellular Uptake with Chitosan/DNA Complex in Hepatoma Cell Line
Comparison between Ethylcellulose Aqueous Colloidal Dispersion and Ethylcellulose Ethanolic Solution as Rupturable Coating Materials for Pulsatile Release Tablets
Fabrication of Dental Ceramics from Silicon Nitride Core with Borosilicate Glass Veneer
Magnesium Stearate as Anti-Tacking Agent in Acrylic Polymer Films Intended for Gas-Entrapped Floating Delivery System
Oral Bases Containing Centella asiatica Extract: Formulations and Evaluations
Gelatin/Fibroin Hydrogel for Controlled Release of Human Dentin Matrix Extract
Fabrication of P2O5-CaO-Na2O Glasses Doped with Zinc Oxide for Artificial Bone Applications
Antimicrobial Performance and Cytotoxicity of Antibiotics Impregnated Hydroxyapatite for Osteomyelitis Treatment
Floating Alginate Beads as Carriers for Self-Emulsifying System Containing Tetrahydrocurcumin
Study of Mechanical Properties of Magnesium Oxide Doped Alumina (Al2O3) and Yttria Stabilized Zirconia (YSZ) Composite for Medical Applications
Investigation of Antibacterial Properties of Soda Calcium Borosilicate Glass Doped with TiO2
Influence of Diluents on Physical Properties of Soybean Extracted Powder Prepared by Spray Drying Method
Development of Acrylic Matrix Type Ketoprofen Patch
Antimicrobial Effect of Brazillian Propolis/Polycaprolactone Polymer on some Human Pathogenic Bacteria
Nanofiber Production Using Polyvinylalcohol (PVA) and Thai Honey and its Properties
Antimicrobial Activity of Newly Formulated Propolis Cream
Surface Degradation and Mechanical Properties of PVC/Wood-Pallet Composite under UV-Weathering Environment
Preparation of Polydiacetylene Vesicle and Amphiphilic Polymer as Time-Temperature Indicator
Effect of Phthalic Anhydride Loading on Alkyd Resins for Paperboard Coating
The Effect of Binder Phase on the Mechanical Properties of Particle Boards Based on Giant Sensitive Plant
Effect of Lead Oxide on Glass Properties Produced from Rice Husk Fly Ash
Preparation and Properties of Glass Produced from Palm Ash
Properties of Thermal Insulation from Durian Peel Fiber and Natural Rubber Latex
Cheap Media for Inoculum Preparation of Acetic Acid Bacteria
The Efficiency Development of Ammonia-Odor Sensor Based on PSE-Polymer/SWNT Nanocomposite
Sunscreen Liquid Foundation Containing Naringi crenulata Powder
Stability of Anthocyanin from Mulberry Extracts in Alginate Microspheres at High Temperature
Use of Response Surface Methodology for Phenolic Antioxidant Extraction from Lotus (Nelumbo nucifera Gaertn.) Pod Pericarp
Prediction Models for Moisture Sorption Isotherms of Soy Protein Isolate/Carboxymethyl Chitosan/Oleic Acid Blend Films
Inhibitory Effect of Chitosan Films Incorporated with 1,8-Cineole on Salmonella Attached on Model Food Surface
Characterization of Eugenol Extracted from Lemongrass (Cymbopogon citratus (DC.) Stapf) for Food Packaging Materials
Efficacy of Activated Carbon In Situ to Oil Palm Frond Paper for Active Packaging on Mechanical Properties
Effect of Molecular Sizes, Sources of Chitosan and Plasticizer Types on Properties of Carboxymethyl Chitosan Films
Surface Treatment on Low Density Polyethylene with TiO2 Nano-Particles for Packaging Printing
Characterization Nanocrystalline of Hydroxyapatite Synthesized by a Co-Precipitation Method
Biomaterials and Applications
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
