Chapter
Effects of Different Particles Sizes of Graphite on the Engineering Properties of Graphites/Polypropylene Composites on Injection Molding Aplication
Mechanical and Morphological Properties Evaluation of HDPE/Organoclay Nanocomposites with Various Percentages of NR Content
Nano-Alumina and Radiation Effect on the Mechanical Properties of High Density Polyethylene/Hydroxy Apatite Composite
Influence of Crystallite Size on Consolidation of Carbon Nanotube Reinforced AA 4032 Composite Powders by Equal Channel Angular Pressing
Thermal Free Vibration Analysis of Temperature-Dependent Functionally Graded Plates Using Second Order Shear Deformation
Optimal Sintering Procedure to Fabrication of Functionally Graded Hydroxyapatite-Titanium
Processing and Characterization of Palm Fiber-Polypropylene Composites
Effects of Antioxidants Content on the Physical and Mechanical Properties of Wood Plastic Composites
Effect of Loading Concentration on the Electrical and Hardness Properties of MWCNT/Epoxy Nanocomposites
Effect of Wet Oxidation on the Dispersion and Electrical Properties of Multi-Walled Carbon Nanotubes/Epoxy Nanocomposites
Tensile and Impact Properties of Sugarcane Bagasse/Poly(vinyl Chloride) Composites
Notch Effect on Discontinuous Fiber Reinforced Thermoplastic Composites
Fabrication of Porous LSCF-SDC Carbonates Composite Cathode for Solid Oxide Fuel Cell (SOFC) Applications
Developing Packaging by Using Smart Material which Helps to Realize Spoilage in Yoghurt
The Effect of Alkali Treatment Mechanical Properties of Kenaf Fiber Epoxy Composite
Effect of Organic Modification of Muscovite on the Polypropylene Layered Silicate Nanocomposite
Evaluation of Corrosion Properties of Electroless NiP/Nano-SiC Composite Coatings
Thermal Properties and Thermal Degradation Kinetics of Polypropylene/ Organomodified Ni-Al Layered Double Hydroxide (LDH) Nanocomposites Prepared by Melt Intercalation Technique
Analysis of Energy Absorption on Pultruded Composite Tube under Oblique Loading
Fatigue Life Prediction of Composite Materials: Artificial Neural Networks vs. Polynomial Classifiers
Investigation on Improvement of Mechanical Properties of Kenaf / E-Glass Fiber Composites by Mercerization Process
Influence of Cutting Parameters on Surface Roughness for Wet and Dry Turning Process
Development of Biocomposite Wall Cladding from Kenaf Fibre by Extrusion Molding Process
Characterisation and Properties of Sintered Recycled Glass Utilising CIP Method
Nanotechnology in Pulp and Paper Industries: A Review
Oscillatory and Creep Recovery Test on Nano-Composite Lead-Free Solder Pastes (Nickel and Platinum Powder)
Progressive Damage Analyses of Composite Laminates Exhibiting Free Edge Effects Using a New Micro-Meso Approach
Fabrication and Characterisation of La0.6Sr0.4Co0.2Fe0.8O3-δ-SDC Composite Cathode
LiCF3SO3 – CeO2 Composite Electrolytes Prepared by Sol-Gel Technique: Structural and Conductivity Studies
Shape Factors for Irregular Glass Reinforced Plastic Pipes – An Analytical and Numerical Approach
Field Layout of Glass Reinforced Epoxy Pipeline – A Practical Approach
Cotton-Epoxy Composites: Development and Mechanical Characterization
Optimizing Processing Parameters and Fiber Size for Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite
Effect of Hydroxyapatite Reinforced High Density Polyethylene Composites on Mechanical and Bioactivity Properties
Microanalysis Techniques for the Investigation of Interphases Formed between Thermoset and Thermoplastic Polymers: Scanning Electron Microscopy and Energy Dispersive X-Ray Analysis
Measurements of Interface Fracture Strength between Fiber-Reinforced Composite Laminates and Thin Surface Films Using the Blister Test
Influence of Surface Modifications on Interfacial Interaction of Zeolite Filled Polymer Composites
Studies on Development, Bioactivity and Corrosion Behaviour of Nanostructured Titania/Hydroxyapatite Composite Layer on Cp Ti
Optimal Design by Elitist-Genetic Algorithm for Maximum Fundamental Frequency of Fiber Metal Laminated Plates
Fundamental Frequency Optimization of Laminated Cylindrical Panels by Elitist-Genetic Algorithm
Finite Element Analysis of Fibre Reinforce Concrete Beam Subject to High Temperature by Using EURO-Code Models
Responses of Aging Treatment to the Behavior of Aluminum Alloy with Addition of 0.02% Zirconium Element
Poly(vinylidene Fluoride)/Microcrystalline Cellulose Nanocomposites with Enhanced Compatibility and Properties
Simultaneous Optimization for Multiple Responses on the Compression Moulding Parameters of Composite Graphite – Polypropylene Using Taguchi Method
Modeling and Analysis of Elastoplastic Impacts on Supported Composites
PVDF-HFP-NH4CF3SO3-SiO2 Nanocomposite Polymer Electrolytes for Protonic Electrochemical Cell
Li2CO3 – Al2O3 Composite Solid Electrolytes Prepared by Sol Gel Method
Measurement on Strain Rate Sensitivity and Dynamic Mechanical Properties of Various Polymeric Materials
Sandwich Composites of Glass Fibre Panel and Polyurethane/Coconut Coir Foam Core (GFRP - PUC)
The Study of Biodegradable Thermoplastics Sago Starch
Cotton Reinforced Biopolymer Matrix Composite: Effect of Curing and Aging Conditions on its Mechanical Properties
Comparison on Rheology Properties of Polypropylene and Polyethylene as Binder System with Stainless Steel 316L for Metal Injection Moding
Optimizing the Curing Process of Epoxy-Clay Nanocomposites
Effect of Mg Content on the Characteristics of Al/SiC Nanocomposite Powders Produced via In Situ Powder Metallurgy Method
A Semi-Energy Finite Strip Method for Post-Buckling Analysis of Relatively Thick Anti-Symmetric Cross-Ply Laminates
Large Deflection Behavior of Composite Laminated Plates under End-Shortening and Normal Pressure Loading Using a Semi-Energy Finite Strip Method
Water Retention in Kenaf/Polypropylene Composites due to Repeated Immersion and Drying Conditions
The Effect of Aging Temperature on Mechanical Properties of Banana Pseudostem Fiber Reinforced Polymer Composite
The Behavior of Construction Waste Concrete
Comparative Study of Physical Properties Based on Different Parts of Sugar Palm Fibre Reinforced Unsaturated Polyester Composites
Effect of Core Thicknesses on Impact Performance of Thermoplastic Honeycomb Core Sandwich Structure under Low-Velocity Impact Loading
Boundary Condition Effects on the Parametric Stability of Moderately Thick Laminated Cylindrical Panels
The Effect of Silane Treatment on Tensile Properties and Morphology of Polypropylene/Recycled Acrylonitrile Butadiene Rubber/Rice Husk Powder Composites
The Effect of Silane Treatment on Processing Characteristic and Swelling Behavior of Polypropylene/Recycled Acrylonitrile Butadiene Rubber/Rice Husk Powder Composites
Parametric Study of Automotive Composite Bumper Beams Subjected to Frontal Impacts
Effect of Sonication Time and Clay Loading on Nanoclay Dispersion and Thermal Property of Epoxy-Clay Nanocomposite
Variation of Mechanical Properties of Epoxy-Clay Nanocomposite with Sonication Time and Clay Loading
Investigation on Bending Strength and Stiffness of Sugar Palm Fibre from Different Parts Reinforced Unsaturated Polyester Composites
Properties of Kenaf Filled Unplasticized Polyvinyl Chloride Composites
Rheological Behaviour of Polypropylene/Kenaf Fibre Composite: Effect of Fibre Size
Mechanical and Thermal Properties of Polyamide 6 Nanocomposite Toughened with Epoxidised Natural Rubber-25
Comparative Study of Fiber Metal Laminates (FMLs) and Aluminum Skins for Polypropylene (PP) Honeycomb Core Sandwich Structure under Low Velocity Impact Loads
Buckling and Post-Buckling Improvements of Laminated Composite Plates Using Finite Element Method
Thermal Buckling and Post-Buckling Improvements of Laminated Composite Plates Using Finite Element Method
Impedance Characteristics of Electrospun Nylon-6/TiO2 Nanocomposite for Humidity Sensor
A New Self Healing Method in Composite Laminates Using the Hollow Glass Fiber
Viability of Synthetic Fibers to Replace Steel Wire Mesh in Composite Metal Decks Construction
Optimization of Injection Parameters Using 16µm Stainless Steel Powder (SS316L) at 63 Vol. %, 63.5 Vol. % and 64 Vol. % Powder Loading by Taguchi Method for Metal Injection Molding
Preliminary Review of Biocomposites Materials for Aircraft Radome Application
Fatigue Delamination Analysis of Composite Laminates with a Central Hole Using Interface Elements
Mechanical and Physical Properties of Cement-Bonded Perticleboard Made from Tea Residues and Hardboards
Responses of PFRP Cantilevered Channel Beams under Tip Point Loads
Effect of Nanoclay on the Mechanical and Thermal Properties of Rigid Polyurethane/Organoclay Nanocomposite Foams Blown with Cyclo and Normal Pentane Mixture
Failure Modes of CFRP Flexural Strengthened Steel I-Beams
Synthesis of MWCNT-Alumina Hybrid as Composite Reinforcement Using Nickel Catalyst
Computer Simulation and Experimental Investigation of Solidification Casting Process
Numerical Aspects of Delamination Modeling Using Interface Elements
A Review on the Performance of Adhesive Bonding in Polymer Composite Joints
Nonlinear Free and Forced Vibrations of Symmetric Laminated Panels
The Partial Replacement of Halloysite Nanotubes (HNTs) and Precipitated Silica by Recycled Poly(ethylene Terephthalate) Powder on Cure Behavior, Tensile Properties and Morphology of Natural Rubber Composites
The Influence of Recycled Poly(ethylene Terephthalate) Powder on Fatigue Life, Thermal Stability, and Morphology of Halloysite Nanotubes (HNTs) and Precipitated Silica Filled Natural Rubber Composites
Analysis of MPV Dashboard Using SolidWorks and ABAQUS
Effect of Flame Retardants on Wood Plastic Composites-HDPE Based
Residual Strength and Failure Criterion of PP Thermoplastic Honeycomb Sandwich Subjected to Low Velocity Impact
Mechanical Properties of Carbon Fiber-Reinforced Polypropylene Composites
Free Vibration Analysis of Composite Sandwich Plate with Viscoelastic Core
Mathematical Model for Axial Crushing of Hybrid Square Tubes
Sintering of Fe-TiC Composite Prepared by Carbothermal Reduction of Hematite and Anatase
Optimizing Processing Parameters for Hybridized Kenaf/PALF Reinforced HDPE Composite
Effect of Fibre Size and Fibre Loading on Tensile Properties of Hybridized Kenaf/PALF Reinforced HDPE Composite
Tensile and Flexural Behavior of Hybrid Banana Pseudostem/Glass Fibre Reinforced Polyester Composites
Retrofitting Pre-Cracked RC Beams Using CFRP and Epoxy Injections
Flexural Performance of Strengthened RC Beams with CFRP Laminates Subjected to Cyclic Loading
Experimental and Numerical Investigation of Mixed-Mode Fracture Properties of Woven Laminated Composite
Large Deflection Behavior of Relatively Thick Functionally Graded Plates under Pressure Loads Using Higher Order Shear Deformation Theory
A Novel Phenol – Based Composite Production: Features and Characterization
Mechanical Vibration Technique for Enhancing Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite
Effect of Quartz-Silicon Dioxide Particulate on Tensile Properties of Aluminium Alloy Cast Composites
Friction Forces between Sheet Molding Compound Charge and Mold Cavity Surface in Compression Molding
Free Vibration Analysis of Symmetrically Laminated Fully Clamped Skew Plates Using Extended Kantorovich Method
Large Amplitude Thermo-Mechanical Vibration Analysis of Asymmetrically Laminated Composite Beams
Effect of Nanoclay on the Physical-Mechanical and Thermal Properties and Microstructure of Extruded Noncross-Linked LDPE Nanocomposite Foams
Thermal Buckling Analysis of Moderately Thick Plates Using Functionally Graded Strips
Polymer Based Filler Materials as Infill for GFRP Pile Connector
The Effect of Bentonite Clay on Green Compression Strength for Tailing Sands from Old Tin Mines in Perak State, Malaysia for Making Green Sand Casting Mould
Effect of Electron Beam Irradiation (EB) on Gas Barrier Property of HDPE/EPDM Nanocomposites
Interfacial Shear Strength of Polylactic Acid-Kenaf Fibre Biocomposites
Preparation and Thermal Properties of Cellulose/Layered Silicate Montmorillonite Nanocomposites Prepared via Ionic Liquids
Investigation of Phase Transformation and Structure Evolution of Electrospun Copper Oxide Nanofibers during Thermal Annealing
Characterization of Tantalum Carbide Reinforced Copper Composite Developed Using Mechanical Alloying
Effect of Milling Speed on Properties of Fe-NbC Composite Prepared by Mechanical Alloying
A Wavelet-Based Damage Detection Approach for Acousto-Ultrasonic In Situ Monitoring Systems
The Influence of Mercerised Kenaf Fibres Reinforced Polylactic Acid Composites on Dynamic Mechanical Analysis
Investigation of Hardness of Short Abaca (Musa Textile Nee) Fibre-Reinforced High Impact Polystyrene (HIPS) Composites by Response Surface Methodology
Influence of Processing Aids and Hydroxyapatite as Fillers on Flow Behaviour and Mechanical Properties of Ultra High Molecular Weight Polyethylene/High Density Polyethylene Composites
Buckling Behavior of General Dome Ends under External Pressure, Using Finite Element Analysis
Feasibility of Manufacturing a Medium Density Fibreboard Made of 4-Year Old Rubber Tree RRIM 2020 Clone
Curing Characteristics and Mechanical Properties of Rattan Filled Natural Rubber Compounds
The Effect of Chitosan Loading on the Properties of Chitosan Filled Epoxidized Natural Rubber Compounds
Investigation on the Microwave Properties of Kenaf and Rice-Husk Fiber Reinforced Pla Composite Utilizing One-Port Coaxial Transmission Line Reflection Method
Influence of Mixed-Mode Ratio on Delamination Fracture Toughness and Energy Release Rate of Glass/Polyester Laminates
Experimental and Numerical Investigation of the Mixed-Mode Delamination of PAN Based Carbon/Epoxy Composite Using Modified Arcan Fixture
Effects of Thickness on Fracture Toughness of Carbon/Polyester Composite
Simulation of Cracks in Fiber Reinforced Composite Plate
Effect of a Coupling Agent on Mechanical and Biological Properties of Polyetheretherketone/Hydroxyapatite Bioactive Composite for Prosthetic Medical Device
Impact Damage Detection in a Stiffened Composite Wing Panel Using Digital Shearography and Thermosonics
Acoustic Emission Localization in a Composite Stiffened Panel Using a Time Reversal Algorithm
Multiscale Modeling of Hybrid Composite Structures
Shell Mould Composite with Rice Husk
Cotton Reinforced Biopolymer Matrix Composite: Effect of Ultraviolet (UV) on its Mechanical Properties
Characterisation and Properties of Sintered Glass-Ceramics Produced from Recycling Glass by Using Pressure-Less Method
Fiber Reinforced Composite Structure with Bolted Joint – A Review
Development of Novel Polymer Composite Beam Using Ultrasonic Welding Process for Acetabular Cup Prosthesis
Experimental Investigation and Finite Element Analysis of Dynamic Behavior and Damage of Glass/Epoxy Tubular Structures
Curing Characteristics, Fatigue Life and Morphological Properties of Natural Rubber Nanocomposites with Halloysite Nanotubes (HNTs)/Carbon Black (CB) Hybrid Filler
Effects of Processing Temperature and Chemical Treatment on Tensile Strength of Kenaf Fiber - Reinforced Polypropylene Waste Composites
Damage Evolution in Structural Steel at Different Loading Conditions
Modeling of Stiffness Reduction of Vibration Conveyor Springs Subjected to Ultra High Cyclic Loading under High Humidity
Lay-Up Design of Low Wind Speed Composite Turbine Blade
Effect of Stitching Density of Nonwoven Fiber Mat towards Mechanical Properties of Kenaf Reinforced Epoxy Composites Produced by Resin Transfer Moulding (RTM)
Synthesis of TiO2/Zno Core/Shell Type Nanocomposite via Sol-Gel Method
Life Cycle Assessment of Particulate Recycled Low Density Polyethylene and Recycled Polypropylene Reinforced with Talc and Fiberglass
Differential Cubature Method for Static Solution of Laminated Shells of Revolution with Mixed Boundary Conditions
Effects of Direct Current and Pulse Electrodeposition Parameters on the Properties of Nano Cobalt Coatings
Vibration of Nonlocal Euler Beams Using Chebyshev Polynomials
An Investigation on Relative Post-Buckling Stiffness Variations of Symmetrically Cross-Ply Laminates
A Preliminary Study on Translational Kinetic Energy Absorption Using Coconut-Fiber (Coir) Sheets as a Potential Impact-Worthy Constituent in Advanced Aerospace Material
Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterisation by Pull-Out Test
Doping of Palladium in Silica Nanofibers via Electrospinning and Sol-Gel Synthesize as Hydrogen Storage Material
Effect of Nickel Composition and Preparation Method for Production of Hydrogen via Glycerol Steam Reforming
The Influence of Li on the Tensile Properties of Al-Mg2Si Metal Matrix Composite
Effect of Fiber Loading on the Mechanical Properties of Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite
Flexural Mechanical Characteristic of Sawdust and Chipwood Filled Epoxy Composites
Tensile Properties and Micromorphologies of Sawdust and Chipwood Filled Epoxy Composites
A New Finite Fracture Mechanics Approach for Assessing the Strength of Bonded Lap Joints
Metal Matrix Composites: Solidification Parameters of Aluminium-11.8% Silicon Alloy Reinforced with Titanium Carbide Particulates
Parametric Study on Cohesive Element for Composite Fuselage Model
Manufacturing High Performance Wood Composite Panel from Paulownia
Kenaf Nanofiber/Polylactic Acid (PLA) Nanocomposite
Simulation of Thermoset Injection for Bulk Moulding Compounds (BMC)
Flutter Analysis of a Hybrid Plate-Like Fiber-Reinforced Composite Wing
Selection of Polymeric Based Material Composite for Fibreglass Boat Components Using Expert System
Tensile and Thermal Conductivity Properties of Epoxy Nanocomposites Thin Film by Spin Coating Technique
A Structural Health Monitoring of a Pitch Catch Active Sensing of PZT Sensor on Normal, Damage and Repair Aircraft Spoiler
Effect of Filler Loading and Coupling Agent on Tensile and Impact Properties of Polypropylene with Oil Palm Ash Composites
Multisphere Ceramic Composite Concept and its Numerical Study of the Ballistic Response
A Composite Consisting of a Set of Hexagonal Ceramic Bars - The Numerical Study of the Ballistic Resistance
Effects of Impregnation Time on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres
Effects of Impregnation Pressure on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres
Indentation Analysis of In-Plane Prestressed Composite Sandwich Plates: An Improved Contact Law
The Influence of Yttrium Rich Intermetallic Phases and Heat Treatment on the Microstructure, Hardness and Wear Properties of Al-15%Mg2Si Composite
Microstructure and Tensile Properties of Al-15wt%Mg2Si Composite after Hot Extrusion and Heat Treatment
Vibration Analysis of Thick Arbitrarily Laminated Plates of Various Shapes and Edge Conditions
Influence of Iron Oxide Nano Particles on Electrospun Poly (Vinylidene Fluride)-Based Carbon Nanofibers on Hydrogen Storage
Composite Science and Technology
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
