Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).Recent research on the creep and fracture of engineering materials is presented, with particular emphasis being placed on: mechanisms of high-temperature deformation and fracture, materials for high-temperature service, the behavior of single and polycrystals, components and structures, grain boundaries and interfaces, and superplasticity.
Special focus is placed on creep crack growth and fatigue; creep damage, rupture and life assessment; an plant conduct assessment. Materials covered include structural steels, nickel-base superalloys, nonferrous alloys, intermetallics and ceramics.
Mechanisms of high-temperature deformation and fracture, materials for high-temperature service, the behavior of single and polycrystals, components and structures, grain boundaries and interfaces, and superplasticity are among the highlights of the 80 or so papers. The topics include recent results of a long-term creep rupture test, creep crack growth in nearly full-lamellar gamma titanium-aluminum alloys, researching the welding effect on the creep damage of high-temperature furnace tubes, the kinetic modelling of the influence of particles, lattice-diffusion creep mechanisms not based on stress heterogeneity, microstructural aspects of the creep behavior of advanced power plants steels, deformation mechanisms in tin and tin-based electronic solder alloys, and the creep behavior of a fine-grained tetragonal zirconia. The papers
Chapter
Creep and Creep Fatigue Crack Behavior of 1Cr- and 9Cr-Steels
Creep Rupture Behavior of Advanced 9-12%Cr Steel Weldment
Creep Life Assessment of High Chromium Ferritic Steels by Recovery of Martensitic Lath Structure
Creep Rupture Properties of Helium Implanted Low Activation Martensitic Steel for Nuclear Fusion Application
A Change in the Mechanism of Creep Crack Growth in a Dissimilar Metal Weld at 540 °C
Mechanical Behavior and Strengthening Mechanism of W containing 9-12% Cr Steels under Creep Condition for a Cracked Specimen
Creep Crack Growth in a High Strength Low Alloy Steel at 360 °C
Creep Crack Growth in Nearly Fully-Lamellar Gamma TiAl Alloys
Modelling of High Temperature Multi-Axial Creep Rupture Behaviour of γ-Titanium Aluminide
Effect of Fiber Orientation on Fatigue and Fracture Properties of Fiber Eutectic Al-Al3Ni Composite Alloy
On-Plant Test of TÜV HCM12 and ASME T23 Alloys for Use as Water Wall Materials
Evaluation of Long-Term Creep Rupture Strength of Tungsten-Strengthened Advanced 9-12%Cr Steels
Research of Welding Effect on Creep Damage of High Temperature Furnace Tubes
The Reversibility of Creep Strain at Low Stresses and Low Temperatures
The Significance of Diffusion Creep and Harper-Dorn Creep at Low Stresses
Deformation Behavior of Fe-3%Si Steel at High Temperatures
A Critical Reassessment of the Ravotnov-Kachanov Equations
Lattice-Diffusion Creep Mechanism Not Based on Stress Heterogeneity
A New Era of Grain Boundary Design and Control for High Temperature Materials
Modelling the High Temperature Creep Behaviour of a New Single Crystal Nickel Base Superalloy
Orientation Dependent Creep Behavior and Dislocation Structure of Nickel Solid Solution Single Crystals
Threshold Stress for High-Temperature Deformation of Dispersion-Strengthened Alloys with Incoherent Dispersoids
High-Temperature Deformation of Cu-SiO2 Bicrystals with [011] Twist Boundaries
Kinetic Modelling of the Influence of Particles on Creep Strength
Dislocation Activity in Plastically-Accommodated Creep in an Inclusion Bearing Material
Lattice-Diffusion Creep Mechanism Not Based on Stress Heterogeneity (2)
Effect of Dislocations Substructure on Creep Behavior of Steels Strengthened by Fine Carbides
Study on Evaluation Procedure of Multiaxial Creep Strength of Low Alloy Steel
Theoretical and Experimental on the Significant Creep Deformation of SUS 316 Induced by Irradiation at 60°C
High Temperature Deformation with Interfacial and Plastic Accommodation in Spherical-Al2O3-Particle-Dispersed Al-Matrix-Composite
The Size Effect of Particulate SiC on Activation Energy for High-Strain-Rate Superplastic Flow in Powder-Metallurgy Processed 2124 Al Composites
Experimental Study of the Mechanical Properties at Elevated Temperatures in Commercial Mg-Al-Zn Alloys for Superplastic Forming
Superplasticity in GeO2-Nd2O3 Doped Y-TZP
Low Temperature Superplasticity in Fe3Al Alloys
Deformation Behavior of 7475 Aluminum Alloy at High Temperature
Superplasticity at Low Temperatures in a ZK61 Magnesium Alloy Produced by Powder Metallurgy
High Strain Rate Superplasticity of a β-Si3N4 Whisker Reinforced Pure Aluminum Composite
The Effect of Alumina Doping on the Superplastic Characteristics of 3 Y-TZP
Grain Boundary Analysis and Superplastic Characteristics in GeO2-Doped TZP
Characterization and Mechanical Properties of a δ/γ Duplex Stainless Steel
Contribution of Tungsten to Microstructure Stabilization and Improvement of Creep Resistance in Simple 9Cr-W Steels
Effect of Heat Treatments on Room Temperature Creep Strain of a High Strength Steel
Strengthening of Heat Resistant Martensitic Steel by Cu Addition
Creep Resistance and Structural Stability of Low-Alloy CrMo and CrMoV Steels
Optimum Tungsten Content in High Strength 9 to 12% Chromium Containing Creep Resistant Steels
Transient Creep Behaviour of Forged Thick Section 9Cr-1Mo Ferritic Steel
Effect of Soluble Nitrogen on the Creep Strength of an Austenitic 25Cr-20Ni Steel
Microstructural Aspects on the Creep Behaviour of Advanced Power Plant Steels
Effect of M-C (M=Mo, Mn, and Cr) Atomic Pairs on Creep Properties of Fe-M-C Ternary Alloys
Acceleration of Fe2W Precipitation and Its Effect on Creep Deformation Behavior of 8.5Cr-2W-VNb Steels with Si
Strengthening Mechanisms in Heat-Resistant Martensitic 9Cr Steels
Heterogeneous Changes in Microstructure and Degradation Behaviour of 9Cr-1Mo-V-Nb Steel During Long Term Creep
Creep Characteristics of Precipitation Hardened Carbon Free Martensitic Alloys
Creep Strengthening Mechanism of Mo and W in 9% Cr Heat Resistant Steels
Creep Properties of Advanced Heat-Resistant Martensitic Steels Strengthened by L1o Type Ordered Intermetallic Phase
Microstructuural Evolution in SUS304H Steel during Long-Term Creep Over 105 h
Mechanical Properties of 11Cr-0.4Mo-2W-CuVNb Steel Welded Joints at Elevated Temperatures
Design of New Creep-Resistant Nickel-Base Superalloys for Power-Plant Applications
Recovery of Creep Properties of Alloy 625 After Long Term Service
Extension of an Anisotropic Model of Creep in Single Crystal Superalloys to Variable Loading and Multiaxial Loading
Creep in Single Crystals of γ Single Phase Ni-20Cr Alloy and Evolution of Dynamic Recrystallization
Influencing Factors of Stress Rupture at 750 °C Temperature for Cast Nickel Base Superalloy K403
Study on Creep Properties and Microstructural Relation in Directionally Solidified Nickel Base Superalloy
Creep and Evolution of Dynamic Recrystallization in γ Single Phase Single Crystals Located at Poles in Standard Stereo-Triangle
Stress Dependence of Evolution of Dynamic Recrystallization in γ Single Phase Single Crystal
Creep of Reinforced and Unreinforced AZ91 Magnesium Alloy
Creep Strength of Binary Magnesium Alloys up to 0.6 tTm
Microstructural Evolution during Creep of the Mg-Al-Alloy AZ91hp
Effect of Liquid Phase on Creep and Fracture Behavior of Al-5%Mg
High Temperature Strengths of Ir-Based Refractory Superalloys
Creep Behavior of Aluminum Alloy Foils for Microelectronic Circuits
Creep and Evolution of Dynamic Recrystallization in Single Crystals of Ti-48at%Al with Different Orientation between Stress Axis and γ Lamellar Plate
Anomalous Creep Curve of Cu-30 Mass%Zn Alloy
Deformation Mechanisms in Tin and Tin-Based Electronic Solder Alloys
Effect of Microalloying on the Creep Strength and Microstructure of Eutectic Sn-Pb Solders
Microstructures and Fracture Behaviours of Ir-Nb Two-Phase Refractory Superalloys Containing Various Amounts of Nb, Ni, Mo, C and B
Investigation on Microstructure and Fracture of Quaternary Ir-Based Alloys
Role of Interfacial Dislocations on Creep of a Fully Lamellar TiAl
Microstructural Evolution Associated with Creep Rate Minima in Pure- and Near-γ TiAl Intermetallics
A New Microstructural View of Creep in Near-γ TiAl-Alloys
Creep Deformation of Polysynthetically Twinned (PST) Ti-48mol%Al
Effect of Lamellar Spacing on Creep Strength of Ti-42mol%Al Alloy with Fully Lamellar Structure
Alternative Approaches to Creep Data Analysis for Ceramic-Fibre-Reinforced Ceramic-Matrix Composites
Elasticity, Stress Relaxation and Creep in SiC Particle Reinforced Oxynitride Glass
Improvement of High Temperature Strength and Creep of α-Sialon by Grain Boundary Crystallization
Creep Processes in the Advanced Silicon Nitride Ceramics
Creep Deformation and Fracture of SiC/SiC Composites
Cavitation Failure in a Superplastic Alumina with Zirconia-Particle Dispersion
Tensile Deformation of Both ZrO2/TiC Composite and Al2O3/TiC Composite at High Temperature
Is there Diffusion Creep in Alumina?
High Temperature Mechanical Behavior of YSZ Nanocrystals
Yttrium in Polycrystalline α-Alumina
Slip Systems in Erbia Single Crystals
A Critical Factor to Determine the High-Temperature Creep Resistance in Cation-Doped Polycrystalline Al2O3
Compressive Creep and Stress Relaxation Kinetics in a High Purity Silicon Nitride Ceramics in the 1400-1650 °C Range
Dislocation Structure and Activated Slip Systems in β-Silicon Nitride during High Temperature Deformation
Transmission Electron Microscope Observation of Creep Deformed Al2O3, SiC and Si3N4 Ceramics
Lifetime Prediction and Confirmation of Long Term Creep Resistance in Advanced Silicon Nitride Ceramics
Creep Behavior of a Fine-Grained Tetragonal Zirconia
High-Temperature Deformation in Unidirectionally Solidified Eutectic Al2O3-YAG Single Crystal
Creep and Fracture of Engineering Materials and Structures
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
