Chapter
Performance of Photocatalytic Microfiltration with Hollow Fiber Membrane
Phase Transformation of TiO2 in the Preparation of Pearlescent Pigment
Photocatalytic Activity of Doped NaTaO3 and NaNbO3 : (Y, La, Nd, Sm) Sol Gel on Degradation of Rhodamine B by UV Irradiation
Photocatalytic and Photoelectrochemical Properties of Nitrogen-Substituted TiO2 Thin Films Prepared by an RF Magnetron Sputtering Deposition Method
Photocatalytic Degradation of NO2- by Fe3+-Doped TiO2 Nano Particles Prepared by Sol-Gel Method
Photocatalytic Degradation of Organics Diluted in Water Using TiO2 Loaded on Fluoride-Modified Mesoporous Silica
Preparation of CeO2 Nanophotocatalyst Using Precipitation Method
Preparation of Mesostructured Carbon (MSC) for Removal of Natural Organic Matter (NOM) in Aqueous Solution
Preparation of TiO2/SiO2 Hybrid Hardcoatings on Stainless Steel and its Photocatalytic Effect
Removal of Heavy Metal Ions from Aqueous Solution by Manganese Dioxide-Coated Polypropylene Granules: An Implication of Rainwater Runoff Treatment
Removing Algae with Pt-Doped TiO2 Coatings on Foamed Glass
Suspension Stability of BaTiO3 Nanoparticles under Electrical Applied Field
Synthesis of Titania Nanoparticles via Spark Discharge Method Using Air as a Carrier
Synthesis, Preparation and Catalytic Activities of V-Doped TiO2 Gel Coating on Porous α-Al2O3 Beads
The Effect of Isothermal Heat Treatment on the Rolling Contact Fatigue of Carburized Low Carbon Microalloyed Steel
Mechanism of PVC’s Solid-Phase Photocatalytic Degradation Enhanced by Plasma
Titania Coating of Wasted Silica Particles and their Photocatalytic Property
Visible Light Response of ZrO2 by Nitriding and its Photocatalytic Activity
Visible-Light Activity of N-Doped TiO2 Powders and their Applications
XPS Investigation of Passive Layer on Copper-Bearing Antibacterial Ferrite Stainless Steel
Effect of Sn-Addition on the Bonding Strength between Casting Au-Pt-Cu Alloy and SiO2-Based Porcelain
A Study on Boiling Heat Transfer Augmentation of Heating Process Using Ultrasonic Vibrations
A Study on High Temperature Oxidation of Titanium Alloys in Solid State Bonding Process
Affinity of Cd and Ni on IDA Immobilized Magnetic Beads with Different Lengths of Spacer Arms
Antimicrobial Characteristics of Metal Deposited ACF Filters
Application of Inclined Cooling Plate to Fabrication of Semi-Solid Cast Iron
Application of Platinum and Titanium Materials as an Electrode for Hygiene Purpose
Axial Compression and Bending Characteristics of CFRP Hat Shaped Member According to Orientation Angle
Comparison of Intensity Method and Counting Method in Measurement of Fiber Orientation Angle Distribution Using Image Processing
Deformation Behavior of Functionally Graded Ti-Ni Shape Memory Alloys
Deposition and Characterization of D-Gun Sprayed WC-Co Coating with Self-Lubricating Property
Development of Eco-Flux Laminated Strip for Air Atmosphere Brazing
Development of Miniaturized Micro Metal Forming Manufacturing System
Distribution and Shape of the Pores in Water Permeable Concrete
Dome-Shaped High Power Transformer for Driving A 61 W T5 Lamp
Effect of Aging on Damping Capacity of AZ91 Alloy
Effect of Annealing on the Mechanical Property and Machinability of Free-Cutting Phosphor Bronze Alloy
Effect of Annealing Treatment on Solid State Recycled Magnesium Alloy AZ91D
Effect of Cr on the High Temperature Corrosion of Al3Ti-Cr Alloys in SO2 Atmosphere
Effect of Dam Design on the Fluid Flow in T-Shaped Continuous Casting Tundish
Effect of Load on the Abrasive Wear of Silica-Filled Epoxy Resin Composites
Effect of Product Quality on Life Cycle Assessment in Aluminum Die Casting Process
Effect of Rare Earth on the Microstructure and Performance of SnAgCuRE Solder
Effect of the Size of the Reinforcement Phased on the Properties of Silica-Filled Composites
Effect of Thermo-Mechanical Processing on Microstructure and Elastic Modulus of Metastable Ti-Nb-Si Alloys for Biomedical Application
Effects of Homogenization Treatment on Thermoelectric Properties of Ba8Al16Si30
Effects of Isothermal Heating Process and Rare Earth Elements Addition on the Mechanical Properties of Semi-Solid Formed Mg-5%Zn Alloys
Effects of Manganese on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Processed by Differential Speed Rolling
Effects of Processing Factors on the Mechanical Properties of PBO Filament/ Epoxy Composite Materials
Effects of RPM, Bath Temperature and Anodizing Time in Anodizing for Mg-Al Alloy under Constant Current
Effects of Samarium on Microstructure and Mechanical Properties of Mg-Al-Ca Alloys
Electromagnetic Absorption Behaviors of Ferromagnetic Fe-Cr Alloy Powder and Polymer Composites in the Radio Frequency Range
Electromagnetic Properties of Bi System Superconductor
Evaluation of Indentation Test for Measuring Young’s Modulus of Cancellous Bone
Evaluations of Microstructure and Hydrogenation Properties on Mg2NiHx Hydrogen Absorbing Alloys by Hydrogen Induced Mechanical Alloying
Evolution of Al Alloy Melt Foam Pore Structure in Foaming Process
Extrudability Improvement of 7000 Series Al Wrought Alloys by Thixoextrusion
Fabrication of Lotus-Type Porous Ni-(15, 28 and 31) at.% Al Alloys by Unidirectional Solidification in Hydrogen Atmosphere
Finite Element Analysis for Precision Forging Process of United Transfer Driven Parking Gear
Formation of Boride Eutectic with Addition of Boron in Mod. 12Cr-1Mo Steels
Glass-Polydimethysiloxane Hybrid Microthermostat for Restriction Enzyme Digestion
Hertzian Indentation Damage Behavior of Highly Porous Silicon Nitrides
High Temperature Corrosion of Ti3AlC2 in Ar-1%SO2 Atmosphere
Hollow Amorphous Formation via Oxidation of Al Nanoparticles at Low Temperatures
Hybrid Tooling Using High Speed Cutting and Ceramic Filled SLA (StereoLithography Apparatuses) Technologies
Identification of Phases in the Wide-Gap Region Brazed with BNi-3 Filler Metal Powder Using Electron Backscatter Diffraction
Influence of Interlayer on the Corrosion Behavior of Multilayered WC-Ti1-xAlxN Coatings in Deaerated 3.5% Sodium Chloride Solution
Influence of Particles on Cell Structure of Al-Mg Alloys Foamed by Melt Foaming Method
Influence of Process Parameters on the Adhesive Strength of CrN Coatings
Influence of Reheating Profile on Microstructural Evolution of 2024 Al Wrought Alloy for Thixoextrusion
Influence of the Ball Diameter, Material and Taper Design on Transferred Stresses of Ceramic THR
Influence of Zircon Addition on Thermal Shock Resistance of ZTA for Plasma Reactors
In-Situ Joining of Combustion Synthesized Ni3Al Intermetallic Compounds with AZ91D Mg Alloy
In–Situ Synthesis of Cop/Cu Coating by Laser Cladding
Investigation of Thermal Shock Behaviors for Machinable SiC/h-BN Ceramic Composites
Mechanical Properties and Formability of AZ31 Magnesium Alloy Processed by Differential Speed Rolling
Microstructural Evolution and Crystal Orientation of Electromagnetically Stirred Al Alloy in the Semi-Solid State
Microstructure Analysis and Characterization of Li(Ni1-xCox)O2 Thin Film Prepared by Li Diffusion on Ni-Co Alloy Substrates for Cathode Application
Microstructure and Formability of Different-Speeds Rolled AZ31 Mg Sheet
Microstructure and High Temperature Mechanical Properties of Inconel 617
Microstructure and Mechanical Properties of Si3N4/hBN Composites Prepared by Hot-Pressing Using Nitrided Si3N4 Powders
Noncombustible Magnesium Alloy Processed by Rotary-Die Equal Channel Angular Pressing Method
Passive-Active Transition Behavior of 304 Stainless Steel
Prediction of Temperature Distribution during Curing Thick Thermoset Composite Laminates
Processing and Properties of Al Based Amorphous/Crystalline Alloy Composites
Processing, Microstructure and Mechanical Properties of Hybrid Materials with Al-Mg Alloy and its Composites
Product Geometry for Process Parameter during Rotary Swaging Process as Chipless Forming Process
Recycling of 6061 Aluminum Alloy Cutting Chips Using Hot Extrusion and Hot Rolling
Research on High-Purified Lignin Thermoplastics
Residual Stress Measurement of Plasma Sprayed Coating Layers in ZrO2
Strength of AZ31 Alloys Subject to Severe Deformation by ECAP and DSR
Structure–Mechanical Properties Correlation in a Hydrogenated Ti-Based In-Situ Amorphous Matrix Composite
Studies on Rheological Property and Miscibility of Lignosulfonate/Polystyrene Blends
Study on the Application of Infrared Thermovision Camera for Efficiency Analysis of Solar Cell
Study on the Microstructure of Polycrystalline Silicon Films Treated with Line Shaped Electron Beam
Study on the Oxidation and Electrical Resistivity of Reaction-Bonded Silicon Carbide at High Temperature
Surface Modification of a Dental Ti by Blasted Coating of Bio-Active Calcium Phosphate
Synergistic Effect of Hybrid Filler Contained Composites on Thermal Conductivity
The Behavior of Phase Transformation Characteristics and Ageing on Alloying Method of CuZnAl Shape Memory Alloy
The Influence of Microstructure on the Friction Properties of Carbon/Carbon Composites
Ti-Ca-P Films Formed by RF Magnetron Sputtering Method Using Dual Targets
Fabrication and Characterization of Slag Fiber by Melt Extraction
A Study of Alternative Construction Materials for Slag Derived from Steel Making Industry
A Study on Thermal Stabilization of Spent Foundry Sand
A Window of Opportunity: Designing Carbon Nanomaterials for Environmental Safety and Health
Application in Up-Flow Filtration of Filter Material for Urban Stormwater Control
Application of Gypsum Granule as a Capping Material to Reduce Phosphorus Release from Sediment of Lake Paldang
Beneficial Reuse of Coal Fly-Ash as Porous Reactive Aggregates for Removal of Hydrogen Sulfide
Changing Morphology and Crystal Structure in Ettringite by Trivalent Chromium
Characteristic of Carbonation Reaction from Municipal Solid Waste Incinerator Bottom Ash as a Function of Water Content and their Effect on the Stabilization of Copper and Lead
Conversion of Used Glass Bottles to Porous Materials by Using Hydrothermal Technique
Design of Glass-Ceramic Matrix by Modification of Microstructure for High Strength LTCC Application
Development of Artificial Soil Using Sewage Sludge
Dielectric Properties of Sol Infiltrated Lead Zirconate Titanate Ferroelectric Thick Films
Effect of Grinding and Extraction of Lignocellulosic Fiber on Oil Sorption
Effect of Magnetic Separation in Heavy Metals of Municipal Solid Waste Incineration Bottom Ash
Efficiency of Gypsum as a Capping Material for the Capturing of Phosphorus Release from Contaminated Lake Sediments
Evaluation of Capping Materials for the Stabilization of Contaminated Sediments
Evaporation and Stabilization of Heavy Metals with Colloid/Interface Properties in EAF Dust-Clay Bodies
Filtration Treatment of Pollutants in Urban Runoff Using Expanded Polypropylene Media
Grain Size and Orientation Control in Lead-Free (Bi,La)4Ti3O12 Thin Film Deposited by Spin-On Method for High Density FeRAM Device
Impact Sound Reduction Analysis of Concrete Slab Containing Artificial Lightweight Aggregates Fabricated Using a Sewage Sludge
Investigation of Plasticity Index of Clay Bodies Including Bottom Ashes from the Power Plant
Performance of Bismuth Oxide in the Cathaphoretic Epoxy Primers
Preparation and Standardization of Method for Valuable Metals Analysis in Seawaters
Preparation of Adsorbent from Mine Residues
Properties of Artificial Aggregate for Orchid Culture Fabricated from Solid Wastes
Properties of Waste Derived Mullite
Quality Characteristics of MSWI Ash Melted Slag by Crystallization
Recovery of Silica and Sodium Fluoride from Hexafluorosilicic Acid and Sodium Silicate
Recycling of Waste Rock as a Filler to Prevent Ground Subsidence
Reliability Evaluation of Underfill Encapsulated Pb-Free Flip Chip Package under Thermal Shock Test
Remodeling Techniques of Water Storage Tanks and Residual Chlorine Remaining Devices
Soft Ground Improvements Using Natural Fiber
Structural and Electrical Properties of Lead Zirconate Titanate Thick Films Fabricated by Screen-Printing Method
Utilization of Waste Tires to Reduce Railroad Vibration
Solid State Foaming and Free-Forming of Closed Pore Utilizing the Superplasticity of Zirconia Ceramics
A Study on Supercooling Characteristics of Clathrate Compounds with Concentration of TMA
Apatite Formation on Silicon Suboxide Film Prepared by Pulsed Metal Vacuum Arc Depositon
Apatite Formation on Surface of Plasma-Sprayed TiO2 Coating by Sulfuric Acid Treatment
Application of Cr-X-N Thin Film to Improve the Tribological Properties of Environment Friendly Hydraulic Components
Application of Filtration System to Control Urban Non-Point Pollution
Bi-Axial Stretchable Electrode Based on the Thin PDMS Substrate for the Biomedical Applications
Characteristics of Calcium Trisulphoaluminate Hydrates for Rapid Hardening of Cement Composites
Characteristics of Silica Aerogel Composites Synthesized by Ambient Drying Method
Characterization and Fabrication of Nano-Sized Patterns and Microfluidic Channels Derived from Polyvinylsilazane via Soft Lithographic Technique
Characterization of Automobile Shredder Residues for Chlorine Content and Estimation of it’s Circulation in Cement Kiln
Characterization of Nano-Rod ZnWO4 Prepared by Surfactant-Assisting Solvothermal Reaction
Chemical and Electrical Properties of ZnS Deposited with DEZ and H2S by Atomic Layer Deposition Method
Crystal Growth of Aragonite Precipitated Calcium Carbonate by Seeded Method
Crystal Growth of KNbO3 by Solution-Dropping Method
Decomposition Characteristic of Carbon Tetrafluoride Using 2.45GHz Microwave at Various Gases
Degradation of Azo Dyes by the Reduction and Oxidation with Nano Sized Zero Valented Iron
Direct Electroless Copper Plating on Polyimide for FPCB Applications
Effect of Particle Size on Biocompatibility of Plasma-Sprayed Hydroxyapatite Coatings
Effect of pH on the Dispersion Stability of Aqueous Ferric Oxide Suspension
Effect of Platinum Pre-Coating on Isothermal Oxidation Behavior of MCrAlY Coating by Plasma Spray Process
Effect of Zirconia on the Physical Properties of Cordierite Honeycomb Filter
Effects of Post-Annealing on the Electrical and Optical Properties of ZnO Thin Films Grown on Al2O3 Substrates by Atomic Layer Epitaxy
Effect of Several Factors on the Synthesis of Calcium Hydroxide Prepared by Spray Drying Method Using Limestone
Effects of Y2O3 on the Piezoelectric Properties of PSN-PMN-PZT Composition under Various Alternating Electric Fields
Fabrication and Evaluation of the Novel Elastomer Based Nanocomposite with Pressure Sensing Function
Fabrication and Thermoelectric Properties of p-Type Si0.8Ge0.2 Alloy Doped with Boron
Fabrication of Al2O3 Microtubes Using Carbon Fibers and Al/ Al2O3 Mixed Powder in Solid-Vapor Reaction (SVR) Process
Field Effect Transistor with ZnS Active Layer on ITO/Glass Substrate
Growth Behavior of Carbon Tips Grown by Electron Beam Induced Deposition Method
Hot-Pressed AlN/BN Composite with Excellent Mechanical and Thermal Properties
Microstructural and Mechanical Properties of Polymer-Based Scaffolds Reinforced by Hydroxyapatite
Oxidation of IG-11 Graphite by Air and CO2 Gas
Parameters Affecting the Structure and Yield of Carbon Nanotubes in CVD Method
Phase Transformation of Nanocrystalline CdS Synthesized by Solvothermal Reaction
Porous Scaffold of n-HA/PA66/CS for Tissue Regeneration
Preparation and Characterization of Alumina Nanoparticles from Alkoxides and Na (AOT) Surfactant
Preparation and Characterization of n-HA/Chitosan Scaffold Prepared by a New Method of Emulsion-Foaming/Freeze-Drying Process
Preparation of Nano-Hydroxyapatite/Polyamide6 Composite Porous Scaffold for Bone Tissue Engineering
Preparation of Nano-Size PbTiO3 Particles and its Characteristics on the Adsorption of Organic Acids
Preparation of Nano-Sized Ag Metal Colloid by an Advanced Wet-Process Using 3-Mercapto-Propionic Acid
Preparation of Properties of Biodegradable Membranes Using Natural Polymer/Clay Nanocomposite for the Application of Dehumidification
Properties of Organic/Inorganic Hybrid Material Synthesized from Acrylic Resin and Silane-Terminated CS
Properties of Sol-Gel Coating Film from Colloidal Silica-Silane Sol
Properties of Transparent Color Coating Glass Fabricated by Sol-Gel Technology
Sintering and Mechanical Properties of Alumina Ceramics Prepared by Nanosize Alumina
Spark Plasma Sintering Behavior of Fe-TiC Composite Materials Fabricated by Mechanical Alloying
Stability Enhancement for Cold Field Emitter for Reliable Operation of the Micro-Column System
Study on Indium Tin Oxide Films Deposited Using Different Conductive ITO Targets by DC Magnetron Sputtering
Study on Non-Destructive Testing of Aerial Complex Material by DSPI
Study on Silver-Containing HA Coatings Prepared by Vacuum Plasma Spraying
Study on the Precise Alignment of Micro-Lenses in the Microcolumn by Using the Laser Diffraction Pattern
A Study on Vacuum Plasma Spraying Tungsten Coatings
Supercritical Impregnation of Organic Phase Change Materials into Polyester Fiber
Surface Modification of Li (Co1/3Mn1/3Ni1/ 3)O2 Fine Powders Using Aqueous Al2O3 Sol
Synthesis and Characterization of Ag-Pd Nanoparticles by a Reverse Micelle Process
Synthesis and Characterization of CoFe2O4 Nanoparticles by Glycothermal Process
Synthesis and Characterization of Nano-Size CoAl2O4 Spinel Powder Using Sol-Gel Process
Synthesis and Characterization of Sr1-xLaxFe12-yCoyO19 Nanoparticles Prepared by a Sol-Gel Method Using Propylene Oxide
Recovery of Silica and Sodium Fluoride from Hexafluorosilicic Acid and Sodium Silicate
Synthesis of Precipitated Calcium Carbonate Using a Limestone and its Application in Paper Filler and Coating Color
The Behavior of Automobile Shredder Residue Chips in a Precalciner for Cement Manufacturing Process
The Effect of Applied Pressure on the Nonlinear Behavior of ZnO Based Ceramics
The Effect of Processing Additives on Dispersion and Rheological Properties of Freeze Casting Alumina/Zirconia and Mullite/Zirconia Slurries
The Influence of Preparation Condition on Nano-Hydroxyapatite Prepared in Different Solvent
Preparation of CuO Nanopowder in Aqueous Solution by Applying Ultrasonic and its CO Gas Sensitivity
The Study on the Application of FLEC Test in Indoor Building Materials
Thermal Properties and Microstructure of Zirconia/Monazite-Type LaPO4 Composites for Powder Preparation Methods
Thermal Properties of Water-Absorbing and Surface Modified Porous Pavements
Thermoelectric Characteristics of the Electrodeposited (Bi,Sb)2Te3 Films with Variation of the Electrodeposition Current Density
Thermoelectric Properties of Skutterudite CoSb3 Prepared by Encapsulated Induction Melting
Thick-Film CO2 Sensors Based on NASICON Synthesized by a Sol-Gel Process
Two Types of Phase Separation and Crystal Nucleation-Growth Mechanisms for Machinable Glass Ceramic
Preparation of Si-B-C System Powder Using Silicon, Boron, and Boron Carbide
Dependence of the Dielectric Properties of Pt/ZrO2/Si Capacitors Prepared by RF-Magnetron Sputtering on the Oxygen Partial Pressure and the Annealing Temperature
Fabrication of n-HA/CS Porous Scaffold Carrying Ampicillin-Loaded Microspheres
A Study on the Electrochemical Properties of PEO-Carbon Composite Polymer Electrolytes for Lithium/Sulfur Battery
Characteristics of Fluorine-Doped Tin Oxide Thin Films on Poly Ethylene Terephthalate (PET) Substrate
Cu/GDC Cermet Anodes by Sintering via Surface Modification with MgO Sol
Cycling Performance of LiFePO4 as the Cathode Materials for Lithium Polymer Batteries
Densification and Dielectric Properties of Glass/Ceramic Composites Sintered with Various Borosilicate Glass
Design of Manufacturing Process of Oxygen-Free High Conductivity Copper Using Mahalanobis-Distance Outlier Detection Method
Development of Honeycomb-Type Solid Oxide Fuel Cell Consisting of LaGaO3 Electrolyte
Effect of Metal Additives (Co and Ni) on the Electrochemical Properties of Lithium/FeS2 Batteries
Electrically Conducting Silk Fibroin Microspheres by Incorporation of Multiwalled Carbon Nanotubes on their Surfaces
Electrochemical Influence of Collagen Piezoelectric Effect in Bone Healing
Electrochemical Properties of Perovskite Cathode for Solid Oxide Fuel Cell
Evaluation on Some Metallic Alloys for SOFC Interconnect
Experimental Study on the Effects of the Performance of Polymer Electrolyte Membrane Fuel Cell
Influence of Hydrogen Sulfide in Fuel on Electric Power of Solid Oxide Fuel Cell
In-Situ Gold Nanoparticle Generation Using a Small-Sized Ceramic Heater with a Local Heating Area
Intermediate Temperature Steam Electrolysis Using Doped Lanthanum Gallate Solid Electrolyte (2) Effects of CeO2 Interlayer on Activity
Modeling of Electrochemical-Mechanical Deformations of Ionic Polymer Metal Composite
Nano Composite Membranes of Sulfonated Poly (Ether Ketone)/ Poly (Ether Sulfone) Copolymer and SiO2 for Fuel Cell Application
Nanoporous Titania by Embossing with PMMA Nanopoles Made from Nanoporous Alumina Template
Novel Pt-Tm/Carbon Nanocomposite for the Catalyst of Direct Methanol Fuel Cell
Observation of Effective Micro-Organisms Attached on Porous Ceramics
Preparation and Characterization of High-Power Anode Materials Using Soft Carbon Precursors for Lithium Ion Battery
Preparation of High Lithium-Ion Conductive Ceramic
Properties of Coating Films Synthesized from Colloidal Silica and Methyltrimethoxysilane
Properties of Sol-Gel Coating Film Synthesized from Nano Boehmite and Methyltrimethoxysilane
Recovery of Nickel from Anode Materials of Spent Ni-MH Batteries and its Catalytic Property for CH4 Dry Reforming
Solvent Effect on Ion Hopping of Solid Polymer Electrolyte
Strengthening of Water Glass Based Aerogel by TEOS
Structural and Electrochemical Properties of a Si/C/Cu Film Anode Electrode
Study on the Electrical Properties of Direct-Patternable SBT Films Formed by Photochemical Metal-Organic Deposition
Synthesis and Characterization of Multi-Sulfonated Poly(Aryl Ether Ketone)s Proton Exchange Membranes
Synthesis and Sintering of La0.8Sr0.2CrO3 for the Separator of SOFC
The Discharge Properties of Nickel Sulfide Thin Film Prepared from Sulfidation of Nickel Foil
The Effects of Oxygen Partial Pressure on Interface States and Ferroelectric Properties of PZT/PbO/Si (MFIS) Structures
Electrochemical and Optical Properties of WO3 Prepared by Sol-Gel Coating
Eco-Materials Processing and Design VIII
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
