Chapter
Influence of Different Steel Grades Casting for Mould Thermal State
Dynamic Economic Dispatch Incorporating Wind Power with Carbon Trading Scheme
A Novel Vertical Deflection Monitoring Method for Long-Span Bridges
Coupled Partial Differential Equations Method for InSAS Interferogram Filtering
Kinetics of 2-Chloro-6-Nitrotoluene Hydrogenation on Palladium/Carbon Catalyst without Inhibitors
Preparation of (321) Oriented Silicon Clathrate Film by a Sol-Gel Method
Finite Element Modeling and Numerical Simulation of Superplastic Forming of 8090 Al-Li Alloy in a Rectangular Die
Chapter 2: Mechanics Applications
A Compact Lowpass Filter with Four Transmission Zeros Using Single-Sided Compact Microstrip Resonator Cells
Design and Research on Electric Power Assistant Book Vehicle of Library
Fuzzy Control Application in Condensation Water Recovery Equipment
Application of Crosshole Sonic Logging in Foundation Pile Integrity Detection
A Study on Satellite-Ground Link of the Satellite Receiving Station
Telescope-Style Motion Interface System for Interaction with Virtual Environment
A Novel Material Testing Method for Signal Classification
From Study to Design of an Information Database for Integrated Water Resources Management of Changzhi City
Control System of Automatically Leveling Based on DSP
The APPliCation of Fuzzy Neural Network Control in the AC Speed Adjustment System
A Proxy-Based Composition Method for Distributed SMP2 Models
Parallel Schedule Method of SMP2 Models under SOA
The On-Grid Photovoltaic Power Generation Simulate System Design
The Study of Submerged Arc Welding Power Based on DSP
Study on Themal and Rheological Properties of POM
Compressive Performance Investigation between Thin Honeycomb Paperboard and Corrugated Paperboard of Flute A
Dynamic Analysis of DVG 850 High-Speed Machining Center
Inertial Piezoelectric Micro Rotary Actuator
FEM Analysis for Bending Strength of Active Gear Design
Shakedown and Limit Analysis of Crack Structure Based on Simple Models
Digital Image Edge Detection Method in the Application of the Beam Displacement Measurement and Damage Detection
Recording Image with Software Setup on Dental Inspection
Calculation Method Research of Shear Bearing Capacity for Frame-Sparse Gridiron Composite Wall
Buckling Analysis of a Super-Large Storage Tank
Mode-III Stress Intensity Factor by Williams Element with Generalized Degrees of Freedom
Application of MMESE in Engine Room Safety Management
Research and Application of Polycrystalline Mullite Fiber Device
Single-Phase Sine Inverter Power Supply Based on PIC18F2431
Simplified Simulation and Compute of the Horizontal Displacement of Diaphragm Wall
The Design, Manufacture and Wind Tunnel Test of the Full Aircraft Transonic Flutter Model
Preparation of the Photocatalyst Textiles and Test on the Antibacterial Properties
Optimal Design of Small Winching Drum Installed in Skidding Tractor Based on Computer Aided Design
Design and Implementation of the Parametric Designing System Based on ADO
The Brief Introduction of the Conditions for Extreme Range in the Motion of Oblique and up Throwing
A Manipulator Terminal Actuator Controlled by Microcomputer
Chapter 3: Information Technology for Materials
P2P Traffic Identification Algorithm Based on Topology
Research on Maladjustment-Free Control Algorithm of Bi-Weight Balancer
Research on Simulation and Reconstruction of Vehicle-Pedestrian Collision Based on Multi-Body Dynamics
Algorithm for the Inventory-Routing Problem Based on R-System
An Algorithm for Testing Isomorphism of Planer Graph Based on Distant Matrix
Research on Function of Switching Center to Data Integration System
Computer Simulation of the Filling Process of Air Intake Hood Based on ProCAST
A “L” PCB Image Detection Method Based on Feature
Observations on Mechanics Properties of Stitched Foam-Core Sandwich by Flexural Testing
The Research of Autonomic Computing of Internet of Things Based on Policy-Driven
Knowledge-Based Description Logic ALCO Knowledge Compiled Algorithm to Determine Consistency
The Application of Modern Information Technology in Chinese Agricultural Products Logistics
An Optimal Service Selection with Constraints Based on QoS Algorithm
Research on the Latest Nucleation of Electroless Ni-Cu-P Coatings Deposited on NdFeB Permanent Magnet
Study on TIG and SMAW Comprehensive Welding Process of 1Cr18Ni9Ti/Q235 Compound Steel
The Methods of Extending the Serve Life of Die Casting Dies in Industry Domain
The Brief Analysis of Urban Positioning Influence on Urban Renewal
Study and Analyze on Feature Selection in Text Categorization for Engineering Domain
The Research on Educational Reform about the Hand-Painted Renderings of Architectural Design of Vocational College for Engineering
Chapter 4: Material Engineering
Mass Customization–Oriented Module Combination Method
Comparative Analysis and Selection of Seal Structure between the Piston and Casing of Rapping Device
Parameter Optimization of Injection Closures Molding Based on CAE Technology
Friction and Wear Behavior of Copper-Graphite Composite Material in High-Speed Sliding with Current
Investigation of Compressive and Damage Mechanisms in Fully Lamellar TiAl-Based Alloy
Research on the Fatigue Fracture Surface of X60 Pipeline Steel after per-Tension Deformation
Microstructure and Damping Property of the Discontinuous NiTi SMA Thin Films/PZT Substrate Composite
Models for Autogenous Shrinkage in Low Water-Binder Ratios Concrete
Bainite Growth Behavior at the Early Stage of Transformation at Low Temperature
Deformation Research of T10 Steel at Low Stress Repeated Impact
Numerical Analysis on Heat Transfer Coefficient of Large Die Steel Quenching
Design of the Components of the Fe-Based Bulk Amorphous Alloys
Study on Electrochemical Property of Fe-Based Amorphous Alloys
Preparation of Porous Ti Plate with Nanograde Pore Size by Dip-Coating Method
The Approaches for Estimation of Grain Size in Digital Steel Microscopic Image
Study on Acoustic Emission of 1-3 Orthotropic Cement Based Piezoelectric Sensors
Research on the Strategies of Earthquake Resistant Materials and Design
Investigation of Mechanical Properties of Unidirectional Fibrous Composite by Micro-Mechanics Model
Thixotropic Behavior of Semisolid AlSi6Mg2 Alloy under Cyclic Shear Deformation
Simulation the Environment Pollution Evolution with Lattice Boltzmann Method
Sampling Device for Grain Moisture on-Line Inspection
Stability Analysis of Sheet Pile Walls by Discontinuity Topology Optimization
Analysis on Efficiency and Application of Water-Saving Ship Lock in Inland Navigation
Chapter 5: Applied Mechanics for Materials
Electrical Discharge Machining Technology and its Latest Application
On the Design Method of Noise Reduction of Centrifugal Fan
Blow Molding Process Optimization of Amorphous Alloy Tube Blank Based on DEFORM Software
Ballistic Penetration Damage of 2D Basalt Fiber Plain Woven Composite
Study on Dynamical Modulus and Damping Ratio of Lime-Treated Soil
Residual Strength of Multiple-Site Damage Structure on Aged Aircraft Using Interactions of Dugdale-Type Cracks and Stable Tearing
Numerical Simulation of Tensile Behaviors for Random Spruce Short Fiber Reinforced Composites
Soil-Water Characteristics of Saline Soil in Northwest China
Effects of Polarization on the Strontium Ferrite Modified 0-3 Cement-Based Piezoelectric Composite
Application of Three-Dimension Visualization Technology in Water Supply Pipeline Information System Based on VTK
Dynamic Simulation Analysis of a Ship-Borne Loading Device
The Research on Architecture Design Engineering Method Based on Computer Virtual Reality Technology
Adaptive Acceleration Autopilot Design for Terminal Guidance of a Spinning Rocket Projectile
Existence and Infinitely Many of Solutions to a Class of Initial Value Problems for a First Order Differential System
Study on Materials and Structure of the Tube Wall of Evacuated Tube Transportation
General Structure Configuration and Parametric Design Method of Wind Turbine Tower
A Research on Loss Factor of Embedded and Co-Cured Composite Damping Structure
Sound Insulation Characteristics of the Embedded and Co-Cured Composite Damping Structures
Experimental Study on Composite Deformation of Drawing-Flanging for Axisymmetric Holed Slab
Optimal Design and Control of a Slider-Crank Mechanism System
Mechanical Behavior Research of a High-Rise Hybrid Structure Based on Shaking Table Test
Square Cracks in Three-Dimensional Transversely Isotropic Solids
A Crack Segmentation Approach Using the Combination of Gray Thresholds and Fractal Feature
Design of High-Performance Lowpass Filter Using Inter-Coupled Compact Microstrip Resonator Cells
Chapter 6: Applied Materials
Electro-Assisted Photocatalytic Degradation of Methyl Orange on TiO2 Film Using CaСl2 as Electrolyte
Electro-Assisted Photocatalytic Degradation of Methyl Orange on TiO2 Film Using NH4Cl as Electrolyte
Rheological Study on of PBT with High Melt Flow Index
Effect of Polyethylene Glycol Additive on Structure and Performance of Active Alumina by Reverse Precipitation Method
Sorption Behavior of Strong Acid Cationic Exchange Fiber for Indium
Determination of Ultra Trace of Heavy Metals in Water by ICP-AES Based on Magnetic Enrichment
Self-Assembly of Amphiphilic Block Copolymer in Aqueous Solutions Tuned by Host-Guest Inclusion Complexation
Pseudopolyrotaxane Structure Constructed by Polycaprolactone (PCL) Grafted on Multi-Walled Carbon Nanotubes and α-Cyclodextrins
Reduction of SSI by Hydrogen and its Microscopic Morphology
Thermodynamics of Spherical Sponge Iron Reduced by Hydrogen
Influence of Reduction Temperature of SSI on Nitrate Removal from Wastewater
Synthesis and Properties of Copolymer of p-Hydroxybenzoic Acid and Sulfanilic Acid Using Horseradish Peroxidase
Effects of Polycarboxylate Superplasticizers on Hydration and Microstructure of Hardened Cement Paste
Surface Morphology and Interface Reaction of Cu/SiO2/Si (111) Systems Prepared by Radio Frequency Magnetron Sputtering
Development of Thermal Insulation Composite Material from Recycled Polymer and Recycled Glass
Synthesis of a Disaccharide with a Mannose Unit and a Thiol Tether
Diffusional Analysis in Al-Ni Cold Rolled Strip during Annealing Process
Research on Electrochemical Properties of LiMnPO4 Synthesized by High Temperature Solid-Phase Method
Modeling of Adsorption Isotherms for Supercritical Hydrogen on A and X Zeolite
Determination of PCB Residues in Vegetables by GC-MS
Microcontact Printed Protein Micropatterns on Titanium Surface Characterized by Confocal Laser Scanning Microscopy
Electrochemical Properties of LiMnPO4 Cathode Material Prepared by Ball-Milling
Flame Retardant Properties of Fiber-Based Decorative Wallboard
Influence of Flame Retardant on Leather Fatliquoring and Fire Resistance
An Innovative Approach to Fiber-To-The-Home (FTTH)
The Research on Control Strategy of Worms Spread in Complex Network in Industry
A Improvement Analysis Model Based on Fuzzy Parameters Reliability
Study on Properties of NiO-Doping PMSZT Piezoelectric Ceramics Sintered at Low Temperature
The Effect of Fe3Al on the Microstructure and Mechanical Properties of β–Sialon Ceramic
Preparation and Properties of Corn Stalk Cellulose Microcrystal Reinforced Poly(Vinyl Alcohol) Composite Film
Study on Tanning Properties of Modified Tannic Acid with Sulfanilic Acid Using Horseradish Peroxidase
Ionothermal Synthesis of Sodalite from Metakaolin
Experimental Investigation on the Low-Velocity Impact Damage of 3D Angle-Interlock Woven Composites
Modeling of Dynamic Membrane Bioreactor Nitrification Denitrification Process for Treating Salt-Bearing Aquaculture Wastewater
Chapter 7: Other Related Topics
Study on the Glass Beads Refractive Index Testing Technology
Research on Forecasting Model of High Building Measure Expense in Xi’an
Investigation on Measurement Method of Weight Volume Based on Acoustics
Research on Automatic Metrology Method of Weighing Instruments
Design and Analysis of a New-Type Sand Energy Storage System for Wind Power Stations
The Intelligent Vehicle Control System Based on the Fuzzy Neural Network Technology
Study on Extracting Characteristic Indices about Fabric Properties of Skirt
The Preparation of BiOCl Microspheres and its Photocatalytic Performance
The Design of a Dynamic Equilibrium-Type Harmonic Transmission with Roller Chain
Forecasting of Jiatanchang Bank Collapse in the Three Gorge Reservoir Area
Research on Mesh Optimization of the Finite Element Calculation about Three-Dimensional Foundation Pit
Raman Study of the Relationship between Microstructure and Physical Properties of Isotropic Graphite
Study for Optimization of Pump Setting Depth in Tahe Heavy Oil Field
Investigation of Some Fundamental Properties of Permeable Concrete
Thermal Property Detection and Energy-Saving Analysis of Two Groups of Hollow Blocks
The Thermal Effect in Wheel and Rail during the Brake of Port Crane
Preliminary Analysis on the RCM Technologies Applied in the High-Speed Train
Modal Analysis of Aeroengine Turbine Blade-Disc System
Vibration Characteristics Analysis of an Aero-Engine Turbine Blade
Preparation of Porous Ceramic Separation Membrane Supports
Study on the Preparation of Ceramic Membrane and the Treatment of Tanning Wastewater
The Research on Logistics System Design and Development of New Formats in Central Zone for Industry Growth
Algorithm for the Detection of Feeble Edge of Complex Image
Emerging Materials and Mechanics Applications
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
