Description
The aim of this book is to make an important contribution to the development of new functional and structural ceramic materials, which exhibit enhanced performances and improved lifetimes and reliability, by fostering a better understanding of the mechanisms of their deterioration and failure under various stress conditions at various operating temperatures. Volume is indexed by Thomson Reuters CPCI-S (WoS).The work covers the topics of: basic failure phenomena; indentation fracture; fracture and fractography of structural, electro- and bio-/dental ceramics; fracture of fiber-reinforced composites; fracture of porous and laminated ceramics; defect-strength and microstructure - fracture toughness relationships; damage mechanisms in nanoceramics; fracture and fractography of multilayered ceramics and coatings; machining cracks and edge-chipping; and fracture and fractography of composites and nanocomposites.
Overall, the contributions to this collection accurately reflect the current state of knowledge with respect to the fractography of advanced ceramics.
The aim of the September 2008 International Conference on Fractography, held in Slovakia, was to exchange knowledge on damage mechanisms and fracture processes in structural, functional, and bio-ceramics at various operating temperatures, and to explore relationships between microstructural and mechanical properties of monolithic, composite, and nano-ceramic materials. Selected peer-reviewed papers from the c
Chapter
Silicon Nitride Tools for Hot Rolling of High-Alloyed Steel and Superalloy Wires
Fractography of Dynamic Crack Propagation in Silicon Crystal
Failure Analysis on a Flowmeter
Fractography of Dental Restorations
Brittle Fracture Studies of Solid Oxide Fuel Cells
Fracture of Layered Ceramics
Replicas as a Technique for Examining Fracture Surfaces of Ceramics
AFM Study of Typical Fracture Surfaces in Room-Temperature Fracture of Sapphire
TEM Analysis of Wear of Ti/TiN Multi-Layer Coating in Ball-on-Disc Test
Ultimate Strengthening, Theoretical and Limit Tool Hardness
Machining and Wear of High-Alumina Ceramics for Structural Applications
Fractal Analysis and Fractography: What Can we Learn that’s New?
Fractality of Simulated Fracture
Mechanical Fatigue and Hydrothermal Stability of Y-TZP Dental Ceramics
Tensile Properties of Open Cell Ceramic Foams
Influence of the Sample Size on the Results of B3B-Tests
Contact and Bending Strength Tests of Ceramics: What is the Difference?
Strength Tests on Silicon Nitride Balls
Fractographic Analysis of Very Small Theta Specimens
Fractographic Investigations of Ordinary Ceramic Refractory Materials with Reduced Brittleness
Elimination of Oxygenation Cracking in YBCO Bulk Superconductors
Fracture of Thin Walled Translucent Polycrystalline Alumina (PCA) Tubes
Crack Growth Resistance of Carbide Reinforced Composite Ceramics Based on Alumina
The Effect of Neutron Irradiation on the Mechanical Properties of Advanced Silicon Nitride Nanocomposites
Fracture of Oxide Matrix Composites with Different Phase Arrangement
Interfacial Characterisation in Transparent Spinel Matrix Reinforced by SiC Fibre
The Influence of Corrosion in an Aqueous Solution of NaCl on Fracture and Strength of Various Structural Ceramics
Qualifying Glass Surfaces by Scratch Test with Integrated Image Processing
Influence of Internal Architectures on the Fracture Response of LTCC Components
Fracture Surface Development Coefficient and Sialon Ceramics’ Bending Strength
Corrosion of Alumina Ceramics in an Aqueous Solution of Sodium Chloride
Fractography of Dense Metal-Like Carbides Sintered with Carbon
Ceramic Materials for Ballistic Protection
Crack Profile under Vickers Indents
Mechanical Behavior of Sintered Porous Two-Phase Titanium Nanolaminate-Composites at High Temperatures
Failure Investigation of Forming Rolls Made of Si3N4
Comparison of R-Curve Behavior of Si3N4 Measured by Indentation Method and Single-Edge V-Notched Beam Technique (SEVNB)
Investigation of γ-Alon Structural Evolution during Sintering and Hot-Pressing
Effect of Sintering Time on the Phase Composition in PFN Ceramics Prepared by Sol-Gel Process
Effect of Low Temperature Degradation on Scratch Behaviour of 3Y-TZP
Fracture Properties of Basalt Fibre Composites with Cured or Pyrolysed Matrix
Effect of Cerium and Lanthanum Addition on Mechanical Properties of Bismuth Titanate Ceramics
Modification of the Density-Pressure Relationship due to the Internal Friction and Cohesion of a Powder Mass Undergoing Closed Die Compaction
Mechanical and Fractographic Analyses of Monolithic Si3N4 Ceramics during Impact Testing
The Fabrication and Properties of Biscuit-Sintered Y-TZP Ceramics for Dental Applications
Influence of Microstructure on Mechanical Response of Silicon Nitride Ceramic Composites in Nano-, Micro- and Macro-Volume of Material
Strength Degradation Flaws in the Liquid-Phase-Sintered SiC Based Ceramics
Observation of Thermophysical and Tribological Properties of CNT Reinforced Si3N4
Low Temperature Failure of Fe76Ni2Si9B13 Compacted from Amorphous Glass Powder
The Compressibility Behaviour of a New Generation of Coated Metal/Ceramic Composite Powders
Impedance Changes and Carbon Stability during the Heat Treatment of Si3N4–Carbon Composites
The Milling Time Effect on Sintering Kinetics of Silicon Nitride Based Composites
Creep of FINEMET Alloy at Amorphous to Nanocrystalline Transition
Fracture Toughness of Si3N4 Based Ceramics with Rare-Earth Oxide Sintering Additives
Chemical Methods for Scanning Electron Microscope Characterization of Non-Oxide Ceramics and Composites
Brittle Intergranular Failure in Grain Aggregates - A Computer Simulation by Means of the Graphics Processing Unit
Wear of TiCN Coated Sintered Fe-1.5Cr-0.2Mo-0.7C Steels
Quantitative Description of Overlaps on Sialon Ceramics Fractures by the Multifractal Method
Porosity Measurement Method by X-Ray Computed Tomography
Cracked bi-Material Plates under Thermomechanical Loading
Fractography of Advanced Ceramics III
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
