Description
This special-topic collection is intended to showcase the very latest knowhow concerning the design, fabrication and reliability of layered ceramics, ceramic coatings and functionally graded ceramics. It presents an overview of the fundamentals involved in this area, as well as an insight into the critical issues and future perspectives touching these materials.
The 30 contributions cover the pivotal topics of the: design and processing of multilayers; functionally graded materials; structural integrity of multilayers; thermal barrier coatings: processing and lifetime assessment; fatigue, damping and high-temperature behaviour of coatings and multilayers. Truly essential reading.
Given the importance of specialty ceramics in a wide range of industries, particularly in electronics, these proceedings of the June 2006 event presented by Structural Integrity of Ceramic Multilayers and Coatings (SICMAC) serve to meet the need for more engineers with a basic understanding of the field and will also serve to inspire more to specialize in this growing field. These 40 or so papers and posters are unique because they include an overview of the fundamentals as well as leading-edge research, describing the design and processing of multilayers and functionally graded materials, the structural integrity of multilayers, the processing and lifetime assessment of thermal barrier coatings and the fatigue, damping and high temperature behavior of coatings and multilayers. Speci
Chapter
Lamination Process to Obtain Structure with Tailored Residual Stress Distribution
Water Based Colloidal Processing of Ceramic Laminates
Laminated and Functionally Graded Ceramics by Electrophoretic Deposition
Advanced Environmental Barrier Coatings (EBC’s)
Layered Functional Ceramics via Misted Chemical Solution Deposition
Fracture Mechanics of Ceramics - A Short Introduction
Mechanical Properties of Ceramic Laminates
Fracture of Ceramics with Near Surface Gradient Residual Stresses
Instrumented Indentation of Layered Ceramic Materials
Development of Failure Tolerant Multi-Layer Silicon Nitride Ceramics: Review from Macro to Micro Layered Structures
Quantitative Assessment of Crack-Tip Stress Field in Semiconductor GaN Using Electrostimulated Piezo-Spectroscopy
Developments in Processing of Ceramic Top Coats of EB-PVD Thermal Barrier Coatings
Time-Economic Lifetime Assessment for High Performance Thermal Barrier Coating Systems
Modelling Failures of Thermal Barrier Coatings
High Temperature Behavior of Coatings and Layered Ceramics
Ceramic Layer Composites in Advanced Automotive Engineering and Biomedical Applications
Analysis of Free-Layer Damping Coatings
Porous Multilayer PZT Materials Made by Aqueous Tape Casting
Laminated Ceramic Structures within Alumina / YTZP System Obtained by Low Pressure Joining
Functional Gradient Alumina Ceramics with Controlled Porosity
Glass-Alumina Functionally Graded Materials Produced by Plasma Spraying
Characterization of Y2O3, CeO2 and Y2O3+CeO2 Doped FGM Tetragonal ZrO2 Ceramics by Spark Plasma Sintering
Recent Advances in Material Characterization Using the Impulse Excitation Technique (IET)
Strain Mismatch in Ceramic Multilayers: Determination by Strength Measurements
Residual Stress Assessment in the Al2O3\Mullite Based Laminated System
Roughness Effect on the Mechanical Properties of Ceramic Materials Measured from Nanoindentation Tests
Geometry Effect on the Thermal Shock Response of Al2O3/ZrO2 Multilayered Ceramics
Influence of the Cone Crack Geometry on the Strength Degradation
Residual Stresses in Laminar Functionally Graded Ceramic Materials
Modelling of Crack Growth Near the Metallic-Ceramic Interface during Thermal Cycling of Air Plasma Sprayed Thermal Barrier Coatings
Microstructural Evolution of Thermal Barrier Coatings during Isothermal Oxidation
Development of Thin Ceramic Coatings for the Protection against Temperature and Stress Induced Rumpling of the Metal Surface of Turbine Blades
Nucleation of Shear Bands on EB-PVD Thermal Barriers Coatings under Hertzian Indentations
Impression Creep in TBC and Advanced Ceramics Materials
Ti – Al Intermetallic Layers Produced on Titanium Alloy by Duplex Method
Monocomponent Powders and Thin Films in the Binary System SiO2–TiO2
Functional Gradient Ceramics, and Thermal Barriers
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
