Chapter
Performance of Bioactive Hydroxyapatite Coating after Soaking in Simulated Body Fluid
Effect of Layer Thickness on the Phosphorization of 3DP Gypsum Based Monolith
Nanostructured Polycaprolactone-Inorganic Phosphate Hybrid Scaffold for Medical Applications
Gamma-Rays Absorption Studies of PbO-SiO2 Glass System
Influences of Water on the Hydration of Calcined Natural Calcite: Properties and Transesterification Activity Improvement
Nd:YAG Laser Perforation of Plastic Films for Enhanced Breathability
Preparation of Nanoparticles by Laser Ablation on Copper Target in Distilled Water
Photoactivity of TiO2 Films on Glass Substrate for Cyanide Degradation
Effect of 3-Aminopropyltrimethoxysilane-g-Rice Husk Silica on Flame Retardant of ABS/Organomontmorillonite Nanocomposites
Surface Modification of Alumina Nano-Particles by UV-Induced Grafting Polymerization of 2-Hydroxyethyl Methacrylate
Microstructure and Mechanical Properties of Sintered Ti-Cu Alloys
A Disposable Polydimethylsiloxane Microdevice for DNA Amplification
Application of Double Gate Ion Sensitive Field Effect Transistor for Detection of Fluid Flow Rate in Micro-Channel
Ultra-Thin Al2O3 Formation at Room Temperature
Effect of Plasticizers on the Mechanical Properties of Cellulose Laurate Films
Gelatin/Hydroxyapatite Scaffolds: Studies on Adhesion, Growth and Differentiation of Mesenchymal Stem Cells
Grafting of Phosphonate Monomer onto Natural Rubber Latexes via Emulsion Polymerization
On-Chip Platinum Micro-Heater with Platinum Temperature Sensor for a Fully Integrated Disposable PCR Module
The Effect of Ion Implantation on ISFET-Sensing Membrane
Mixed Matrix Membranes from Crosslinked Poly(vinyl alcohol)(PVA) Composited with Zeolite 4A Grafted with Poly(2-hydroxyethyl methacrylate)(zeolite-g-PHEMA)
Study of PDMS Compounds Using the Adhesion Force Determined by AFM Force Distance Curve Measurements
SnO2-Based Thin Film Gas Sensors with Functionalized Surface
Surface Morphology and Optical Property of Silver Nanoparticle Thin Film Prepared by Electrostatic Spray Deposition
Chemical Synthesis and Characterization of Bismuth Vanadate Powder
Effect of Temperature and Dwell Time on Phase Formation and Microstructure of β"-Alumina Solid Electrolyte
Photocatalytic Degradation of Geosmin by Titanium Dioxide Powder Synthesized by the Hydrothermal Route
Fabrication of Porous Polyethylene by Two-Stepped Heat Treatment and Powder Printing Technique
Effect of Compatibilizers on Mechanical Thermal and Morphology Properties of HDPE/TiO2 Nanocomposites
Effect of Coloring Agents on Starch Properties: In Powder and Paste Form
Methylene Blue Degradation over Photocatalyst Bismuth Vanadate Powder Synthesized by the Hydrothermal Method
Synthesis of Stainless Steel/CNTs Nanocomposite Powders
Study on Chemical Vapour Sensing Property of Esterified Poly(vinyl Alcohol)
Effective Properties of Electro-Elastic Composites with Multi-Coating Inhomogeneities
Performance and Stability of Dye-Sensitized Solar Cells with Quasi-Solid State Electrolytes Base on N-Methyl-Quinoline Iodide
Synthesis and Characterizations of PLLA/PEG Block Copolymers
Carrier Design for Astaxanthin Delivery
Coloration in Soda-Lime-Silicate Glass System Containing Manganese
The Effect of Glass Fiber Aspect Ratio on Mechanical and Thermal Properties of PU/GF Foam Composites
Effect of Sulphur Hexafluoride (SF6) Plasma on Hydrophobicity of Methylcellulose Film
Effect of Powder Surface Oxide on Compressive Properties of Aluminium Foams
Natural Fiber/PLA Composites: Mechanical Properties and Biodegradability by Gravimetric Measurement Respirometric (GMR) System
Studies on the Preparation and Gas Sensing Properties of SnO2 Nanostructures at Room Temperature
Synthesis and Characterizations of Strontium Substituted Hydroxyapatite Thin Films
Charge Transfer Mechanism in Organic Memory Device
Adsorption Study of Soybean Oil on PEI-Modified Silica Particles
Deformation of the Extracellular Matrix Due to Osmotic Pressure in Cartilaginous Tissues
Effect of Annealing Ambient on Self-Cleaning Properties of TiO2 Films Prepared by Reactive DC Magnetron Sputtering
Effects of La-Dopant on Phase, Microstructure and Dielectric Properties of Bi4Ti3O12 Ceramics
Novel Modified Aromatic Polyamides and Polyimides Derived from a Diphenyl Ether-Based Diamine Containing Laterally-Attached Phenoxy Phenylene Groups
Characteristics of Microwave-Esterified Cellulose Film from Corn Husk and Cotton: Effects of Degree of Substitution
Properties and Photocatalysis of Nanostructured Titania Prepared by Sol-Gel Method for Solar Hydrogen Production
Membranes Prepared from a Blend of Poly(acrylic Acid) and Natural Rubber-Graft-Poly(vinyl Alcohol) (PAA/NR-g-PVA)
The Effects of Al2O3 Source on Phase Formation, Crystallite Size and Microstructure of Na-β"-Alumina Solid Electrolyte
Characterization of (Ti,Al)N Thin Film Coated by PVD Cathodic Arc Using TiAl Target
Investigation on Degradation of Methyl Parathion Using Visible Light in the Presence of Cr+3 and N-Doped TiO2
Acetophenone and Benzophenone Derivatives as Catalysts in Photodegradation of PE and PP Films
Photo-Catalytic Activity of Quencher Impurity Doped ZnS Nanocrystals
Improving Malaria Diagnosis via Latex Immunoagglutination Assay in Microfluidic Device
Preparation and Applications of Precious Metals Adsorbed Activated Carbon Cloth
The Effect of Surface Modification of TiO2 on Mechanical Properties of Polyethylene Composite Film
Alteration of Thermal Characteristics of Polymer for the Purpose of Creating a Two-Stage Shape Memory Polymer
The Spectroscopic Analysis of Iron-Doped Soda-Lime-Silica Glass by Spectrophotometer and ESR Spectrometer
Gas Sensing Properties of CuO Nanostructures Synthesized by Thermal Evaporation of Copper Metal Plate
Photocatalytic Destruction of Methyl Orange by Titanium Dioxide Powder Synthesized by an Oxalate Co-Precipitation Method
Preparation and Characterization of Heparin-Retinoic Acid-Folic Acid Conjugates for Targeted Cancer Therapy
Preparation and Properties of Natural Rubber - Cellulose Microfibril Nanocomposite Films
Study of the Relationships between the Chemical Structures of Azo Disperse Dyes and their Dyeing Properties on Polyester
Optical Investigation of Bi2O3-B2O3 Glass System
Characterization of Aluminium Titanium Nitride Thin Films Deposited by Reactive Magnetron Co-Sputtering
Synthesis of 8 %mol Yttria-Stabilized Zirconia Powders by Mechanochemical Processing of ZrOCl2.8H2O and YCl3.6H20 with Li2CO3
Ameliorating Soil Sodicity Using Calcium Salt Incorporated Hydrogels
Inhibition of Aluminum Alloy 2024 Corrosion by 4-Amino-5-Phenyl-4H-1, 2, 4-Trizole-3-Thiol in Highly Sulfuric Acid Solution
Microwave-Assisted Modification of Arrowroot Starch for Pharmaceutical Matrix Tablets
Evaluation of Yam (Dioscorea sp.) Starch and Arrowroot (Maranta arundinacea) Starch as Suspending Agent in Suspension
Photocatalytic Hydrogen-Generation of Polyoxotungstate Nano-Clusters from Biomass
Surface Modification of Silica Nanoparticles for Reinforcement of Epoxidized Natural Rubber
Preparation and Characterizations of Electrospun Lactide-Based Polymeric Nanofibers
The Investigation on Ionic Conduction of PEMA Based Solid Polymer Electrolytes
Effect of Thai Silk Sericin and its Extraction Methods on L929 Mouse Fibroblast Cell Viability
Development of Transdermal Patch Comprising Centella Asiatica Extract
Dense Manganese Doped Biphasic Calcium Phosphate for Load Bearing Bone Implants
Porous Alumina through Protein Foaming-Consolidation Method: Effect of Stirring Time and Drying Temperature on the Physical Properties
Fabrication and Characterization of Strontium-Doped Hydroxyapatite Bioceramics Scaffolds for Bone Implant Application: A Preliminary Study
Concentration Effect of Aqueous Synthesis on Biphasic Hydroxyapatite – β-Tricalcium Phosphate Composition
Potention of Lignin, Lignin Sulfonate and Lignin Acetate from Palm Empty Bunch as an Additive Substance in Urea Fertilizer as an Effort to Reduce the Solubility of Urea Nitrogen
Silver Thin Films Deposited by Compact Magnetron Sputtering System
Spray-Dried Pectic Polysaccharide Powders: Evaluation of Physicochemical Properties for Pharmaceutical Preparations
Synthesis and Characterization of SnO2 Nanowires Materials Prepared from Tin Powder
Development of Prolonged Action, Bioadhesive and Slowly Dissolving Minitablets
Conductivity and Dynamic Mechanical Studies of PVC/PEMA Blend Polymer Electrolytes
Gallic Thermosensitive Gel
Structural Studies of Lead Sodium Borate Glasses
Chemical Characterization and Electrical Properties of Indium Oxynitride Grown by Reactive Gas-Timing RF Magnetron Sputtering
An Effect of Viscosity of Coating Materials on Silicon Micro-Patterning Arrays for Superhydrophobic Surface
Preparation of Polypropylene Graft Maleic Anhydride (PP-g-MA) via Twin Screw Extrusion
Effect of Nd3+ Concentration on the Physical and Absorption Properties of Soda-Lime-Silicate Glasses
Electrochemical Synthesis of Polyaniline as Ethylene Gas Sensor
Production of Polysaccharides and Corresponding Sugars from Red Seaweed
Effect of 2-Amino 2-Methyl 1,3 Propanediol on Enteric Properties of Film Prepared from Ammoniated-Based Shellac Composite Salts
Synthesis of SrTiO3 Nanoparticles by a pH-Varying Sol-Gel Process
Effect of Ethylene Vinyl Acetate on the Rheological and Mechanical Behavior of Low-Density Polyethylene-Based Greenhouse Film
Role of Zinc Oxide on Rheology of Thermosensitive Gel Developed for Periodontitis Treatment
Applications of Non-Linear Dynamics in the Production of Functionalised and Sensing Material
Characterization of PVDF-HFP-LiCF3SO3-ZrO2 Nanocomposite Polymer Electrolyte Systems
Investigation of Oxygen Contamination in Indium Nitride Thin Film by X-Ray Absorption Fine Structure
Improvement in the Tensile Strength of Epoxy Resin and Hemp/Epoxy Resin Composites Using Carbon Nanotubes
Conductivity Enhancement of PEDOT/PSS Films with Ionic Liquids as Dopants
Thermo- and Photo-Degradation of LDPE and PP Films Using Metal Oxides as Catalysts
Properties of La2-xSrxMo2-yWyO9-δ Oxide-Ion Conductor Synthesized by Citrate Gel Method
Ionic Conductivity of β"-Alumina Solid Electrolyte Prepared by Liquid Phase Sintering Method
TiOx Concentration Dependence of OPV Efficiency Optimization
Preparation of Highly Monodisperse Polymeric Particles Incorporating Polymerizable Perylene-Bisimide Fluorophore
In Situ Silica Filled Styrene Grafted Natural Rubber by the Sol-Gel Process
Compositional Changes of Enamel and Dentine after Er:YAG Laser Irradiation
Property Modification of Copper Phthalocyanine Film by Nitrogen Dioxide Gas
Nanocrystal-ZnO Thin Film Deposition by a Novel Reactive Gas-Timing RF Magnetron Sputtering Provided for UV Photodetectors
Oxygen Gas-Timing Control for Variety Properties of Sputtered-ZnO
High Refractive Index Dielectric Prepared by Electron Beam Evaporation for Photonic Crystal Optical Biosensor Application
Physical Properties of Sr3Fe2-xCoxO7-δ (x = 0 - 1.0) as SOFC Anode
Development of Bioactive Ceramics to Control Mite and Microbial Diseases in Bee Farms
Effects of Sr and Ni-Dopants on the Structure and Conductivity of Lanthanum Chromite
The Effect of Quartz Nano-Particles on the Damage Monitoring of Adhesive Joint at Cryogenic Temperature
Electrical Property of Mn and Co Dopants on La3Ni2O7±δ and La2.9Sr0.1Ni2O7±δ
CoPc/CdS Hybrid Photovoltaic Device
Optical and Electrical Properties of Modified Polythiophene with Tetrafluorobenzene Thin Film
The Optimization of TiN Film Deposited by DC Magnetron Sputtering Provided for Al Diffusion Barrier
Effect of pH on the Formation of a Bovine Serum Albumin Layer on a Poly(stryren-co-maleic Acid) Surface
Effect of Annealing on Material Properties of Both Electrodes in Dye Sensitized Solar Cell Structure
All-Solid-State pH Sensor Based on Conducting Polymer
Characteristics of Cholesterol-Grafted Gelatin Micelles
Viscoelastic Properties of Galactomannan Solutions
Photocatalytic Decolorization of Dyes for Nano-Structures of Titanium Dioxide (TiO2) Films
Morphology and Structure of Modified Oil Palm Empty Fruit Bunch Cellulose Fibre
Effect of Co-Monomer Content on Rheological Property of Sawdust/ABS Composites
Performance of a Micro Pump Driven by Conducting Polymer Soft Actuator Based on Polypyrrole
Control of Mechanical Properties and Permeability of Electrospun Natural Rubber with Different Composite Systems
Partial Characterization of Biosurfactant Produced under Anaerobic Conditions by Pseudomonas sp ANBIOSURF-1
Titanium Dioxide Powder Prepared by a Low Temperature Hydrothermal Method
Cure Characteristic and Mechanical Properties of Epoxidized Natural Rubber/Chloroprene (ENR/CR) Blends
The Synthesis of Titanium Dioxide Emulsion as UV Blocking
The Modification of Asphalt Emulsion Using Pre-Vulcanized Natural Rubber Latex for Highway Application
Microwave-Assisted Synthesis and Characterization of Zinc Oxide Micropowder
Development of Composite Film for Improving Gas Permeable Properties
Color Tolerance of Identity Color of Chulalongkorn University on General Print
β-Crystal Development of Isotactic Polypropylene during Sheet Extrusion Process
Synthesis and Characterization of CoFe2O4 Particle by PVA Sol-Gel Method
Preparation of Mesoporous Silica from Rice Husk Ash: Effect of Depolymerizing Agents on Physico-Chemical Properties
The Superconducting Magnetic Properties of YBCO Effect on the Inductance of Coil
Product of Spray Dried Rice Starch (Era-Tab®) and its Utilization in Pharmaceutical Industry
Product of Modified Rice Starch (Era-Gel®) and its Utilization in Pharmaceutical Industry
Effect of Nano Silicon Dioxide on Tablet Properties of Rice Starch
Influence of Octenyl Succinate Rice Starch (NurtureCare®) on Rheological Properties of Gelatinized Rice Starch before and after Retrogradation
Investigation of Structural Properties of CuPc/TiO2 Nanocomposites
Effect of pH on Zinc Oxide Powder Prepared by a Chemical Co-Precipitation Method
The Effects of Composition and Sintering Conditions on Zirconia Toughened Alumina (ZTA) Nanocomposites
Electrical Characteristics of DLC Deposited by RF Inductively Coupled Plasma Process
Anti-Tumour Effect of a Chitosan Delivery System for Doxorubicin
Functionalized and Sensing Materials
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
