Chapter
Correlating Microstructural Features and Surface Roughening in Ferritic Stainless Steel
Heterogeneous Deformation and Internal Stresses Developed in BCC Wires by Axisymmetric Elongation
Modelling Nucleation of Recrystallisation in Aluminium Alloys
Subgrain Rotation Recrystallization in Minerals
Slip Circle Constructions for Inhomogeneous Rotational Flow
Applications of Through Process Modelling Developed in VIRSTAR
Deformation and Recrystallization during Thermomechanical Processing of a Nickel-Base Superalloy Ingot Material
Static Recovery and the Orthogonal Strain Path Change Effect in IF Steel
Effects of Stress on Structure Transformations in Metals
Mechanisms of Formation of Submicron Grain Structures by Severe Deformation
Global and Local Structural Evolution during Deformation and Annealing of FCC Metals
Multiple Forging Textures and Microstructures in Al Alloys
The Dislocation Patterns in Deformed Metals: Dislocation Densities, Distributions and Related Misorientations
Recent Progress in the 3D Experimentation and Simulation of Nanoindents
Evolution of the Deformed Substructure Obtained by Cold-Rolling in IF Steel
Observations of Strain Induced Precipitation during the Thermomechanical Processing of AA6111 Alloy
Deformation Mechanisms in High-Al Bearing High-Mn TWIP Steels in Hot Compression and in Tension at Low Temperatures
An Analysis of Deformation Microstructure and Subsequent Recrystallisation in Hot Deformed Aluminium Alloy AA5052 Using Forward and Reverse Torsion
Uniaxial and Plane Strain Compression Behaviour of Magnesium Alloy AZ31: A Comparative Study
Microstructure Evolution after Large Strain Deformation in Al-0.13%Mg
Deformation Processing of Sheet Metals by Continuous Frictional Angular Extrusion
Microstructure and Strain Distribution Influence on Failure Properties in Eutectic AlNi, AlFe Alloys
General Principles of Substructure Inhomogeneity, Arising in Metal Materials under Plastic Deformation
TEM Investigation of Dislocations in Hot Deformed Mg-Al-Zn Alloy
Microstructure and Microtexture Evolution of a TRIP-Assisted Steel after Small Deformation Studied by EBSD Technique
Stimulated Grain Refinement in Ni-Fe Alloy by Coarse Particles during Warm Multi-Directional Forging
Comparison of Single Crystalline and Polycrystalline Behavior under High Pressure Torsion
Effect of Low Temperature Rolling on Microstructure and Properties of ECAE Processed Copper
Deformation and Heat Treatment of Cold Drawn Gold
Characterization of Boundary Misorientations in a Superplastic Al-Alloy Hot-Deformed by ECAE
Ultra-Fine Grained High Carbon Steel by Innovative Deformation
Quantifying Heterogeneous Microstructures: Core and Mantle Subgrains in Deformed Calcite
Effect of Deformation Route on Recrystallization Behaviour of 1100 Aluminum Sheet
An EBSD Study of Austenite Formation and Stability in Low-Alloy TRIP Steels
Annealing of Deformed Materials Developed by Continuous/Discontinuous Dynamic Recrystallization
Annealing in a Natural Laboratory: an EBSD and Cl Study of Calcite and Quartz Growth from Volumes of Rock Heated by a Nearby Melt Intrusion
Effects of Solubility Limit and the Presence of Ultra-Fine Al6Fe on the Kinetics of Grain Growth in Dilute Al-Fe Alloys
The Relative Importance of Nucleation vs. Growth for Recrystallisation in Particle-Containing Fe3Al Alloys
The Softening of a Dispersoid-Rich Commercial Al-Mn Alloy
Ferrite Formation during Slow Continuous Cooling in Steel
The Effect of Strain and Strain Path during Deformation on the Recrystallisation of a Particle Containing Aluminum-Manganese Alloy
A Criterion for Conventional Dynamic Recrystallization: Application to Magnesium Alloys
Influence on Annealing Treatments on Twins in Magnesium Alloy AZ31
Effect of Low-Temperature Recovery Treatments on Subsequent Recrystallization in Al-2.5%Mg
Grain Boundary Migration and Compensation Effect
Microstructure and Texture of Dynamically Recrystallized Copper and Copper – Tin Alloys
The Microstructure Evolution of Copper and Gold Bonding Wires during Annealing
Pinning Forces Exerted by TiN Particles in Austenite of Structural Steels and Comparison with Driving Forces for Grain Growth and for Static Recrystallisation
Structural Dependence of Grain Boundary Energy in Fe-Based Polycrystals Identified by OIM Measurements
Static Recrystallization of Austenite in a Medium-Carbon Vanadium Microalloyed Steel and Inhibition by Strain-Induced Precipitates
Microstructural Refinement during Annealing of Plastically Deformed Austenitic Stainless Steels
Effect of Initial Austenite Microstructure on the Softening – Precipitation Interaction in a Low Nb Microalloyed Steel
The Role of Austenite Grain Misorientation on Ferrite Nucleation in an Fe-Cr-Ni Alloy
In-Situ EBSD Observation of the Recrystallization of an IF Steel at High Temperature
Temperature and Deformation Effects on the Recrystallization Microstructure and Texture of Wire Draw Steel
Role of Recovery in the Recrystallization Simulation Application to a Cold Rolled IF-Ti Steel and a Cold Drawn Copper Wire
Recrystallisation Behavior of Cold Rolled Zr702: Influence of Rolling Direction and Thickness Reduction
Study of Grain Growth Kinetics in Submicrocrystalline Armco-Iron
Intercritical Annealing Behaviour of an Ultrafine Grained C-Mn Steel Obtained by Hot Torsion Deformation
Overview of Texture Evolution during Friction Stir Welding of Stainless Steel Using Crystal Plasticity and EBSD
Tracing the Goss Orientation during Deformation and Annealing of an FeSi Single Crystal
Orientation Selection in ULC Steel during Thermally Activated Phenomena Induced by Cold Deformation
Retention of the ‹001› Fiber Texture for Fe-Si Electric Motor Steels
Surface Texture Evolution during α-γ-α Transformation in Mn and Al Alloyed Ultra-Low Carbon Steel
Texture and Microstructure Variation in Severe Plastic Deformed OFHC Cu Wires
Recrystallization Texture of Copper as a Function of Layer Thickness in Roll-Bonded Cu-Nb Composites
Deformation Structure and Texture Transformations in Twinned Fcc Metals: Critical Role of Micro- and Macro- Scale Shear Bands
The Effects of Hot Band Annealing Temperature on the Texture of 2%Si Nonoriented Electrical Steel
Texture Evolution during Recrystallization in Nonoriented Electrical Steels
A Study of Texture Evolution during Deformation and Annealing in Fe 3 wt.-% Si by Orientation Contrast Microscopy
Mechanism of Texture Evolution during Primary Recrystallisation and Grain Growth in a Zr-2Hf Alloy
Texture Evolution in Invar® Deformed by Asymmetrical Rolling
Texture Evolution of Tertiary Oxide Scale during Steel Plate Finishing Hot Rolling Simulation Tests
Modelling and Advanced Techniques
A Model for Multi Peak Dynamic Recrystallization in Copper
Modelling Deformation Structures in Metals Based on an Entropic Analysis
A Fundamental Model of Aluminum Single Crystal Behavior with Physical Description of Kinematic Work Hardening
Modelling the Deformation and Annealing Processes: Physical and Regression Approaches
Normal Grain Growth in Three Dimensions: Monte Carlo Potts Model Simulation and Mean-Field Theory
Modelling the Influence of Cementite on Static Recrystallisation in Cold-Rolled Low-Carbon Steels
Kinetics, Mechanism and Modeling of Microstructural Evolution during Dynamic Recrystallization in a 15Cr-15Ni-2.2Mo-Ti Modified Austenitic Stainless Steel
Microstructure Evolution during Thermal Processing : Insight from In-Situ Time-Resolved Synchrotron Radiation Experiments
Properties and Dynamics of Bulk Subgrains Probed In-Situ Using a Novel X-Ray Diffraction Method
Determination of Texture and Microstructure of Recrystallized Metals Using High-Energy Synchrotron Radiation
Three Dimensional Microstructure–Microtexture Characterization of Pipeline Steel
Recrystallization Investigated by X- Ray Diffraction Imaging
Plastic Deformation of Zr-Based Alloys at Temperatures of Phase Transformations
Fundamentals of Deformation and Annealing
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
