Chapter
Technology of Ti-Al-Nb Obtaining by Use of Spark Plasma Sintering Method
Obtaining a Metal Composition Material by Dynamic Interaction of the Melt with Reinforcing Fibers
Pre-Treatment of Vegetable Waste in the Production of Composite Materials
Contact Melting Mechanism in the Cu-Ti System
Influence of Compression Load and Counterface Roughness on Abrasive Wear Characteristic of UHMWPE
Features of the Defectiveness of Nanomodified High-Strength Lightweight Concrete Based on Hollow Microspheres
A Technology for Production of Carbon-Graphite-Aluminium Alloy Composite and Areas of its Application
Chapter 3: Function Materials
Anisotropic Materials Based on Magnetic Microwires in EHF Range
Analysis of Statistical Characteristics of Quasi-Breather with Soft-Type of Nonlinearity in the Crystals of A3B Stoichiometry
The Effect of Heat Treatment on the Shape Memory Effect and Superelasticity in NiMnGa Single Crystals
Creating a Varistor Based on Zinc Oxide (ZnO) Powder Obtained by Plasma Dynamic Method
Technology for Processing Electro-Shunter Axle Bearing of Electric Locomotive VL-60
Chapter 4: Coatings and Surfaces
A Production Method for Wear-Resistant Deposited Coatings Modified with TiN Particles
Structural Characteristics of Diamond-Like Carbon Films Synthesized by Different Methods
Metallographic Study of Mesostructure-Ordered Plasma Ceramic Coatings
Modification of Calcium Phosphate Microarc Coatings Surface by Boehmite Nanoparticles
Plasma-Immersion Modification of Nitinol Surface with Silicon to Improve the Corrosion Resistance of the Alloy in Biological Media
Creation of the Combined Heat-Resistant Coating with Gradient Modification of Layers and Methods of its Testing
The Mathematical Modeling of the Initial Stage of Ion Implantation into the Target with Coating
Comparison of SPH and MLSM for Powder Particle Impact Modelling
Mechanical Properties and Structure of the Hypereutectic Silumin Treated by an Electron Beam
Chapter 5: Research and Simulation of the Mechanical Properties of Structural Materials
A Three-Dimensional BEM for Dynamic Analysis of Anisotropic Elastic Multi-Connected Bodies
Modeling of Wave Propagation in the Unsaturated Soils Using Boundary Element Method
Determination of Ultimate Dimensions of Crack-Like Defects in a Wall of Vertical Steel Tanks with Specified Volume of 20000m3
The Dynamic Analysis of a Slab on a Poroviscoelastic Halfspace under Vertical Load via BEM
Prediction of Mechanical Properties of Ceramic Biocomposite on the Basis of Numerical Modeling
The Simulation of Titanium-Aluminium Composite with Intermetallic Inclusions Behavior under Compression
Modeling the Formation of Grain Boundaries as a Result of Two-Sided Crystallization Using Molecular Dynamics
The Effect of a Severe Plastic Deformation by Groove Pressing on the Grain Structure of the Al-Mg Alloy
Features of Dynamic Strain Aging of Low-Carbon Steels during Severe Plastic Deformation Processing
Contributions of Various Strengthening Mechanisms to the Flow Onset Stress in the ECAP-Processed Cu-Cr-Zr Alloy
Mechanical Properties of Ultrafine-Grained Al-Mg Alloy Produced by Severe Plastic Deformation
Influence of the Sheet Metal Anisotropy on Polythickness of the Skin after Stretch Forming
The Implementation of Algorithm Iterative Conversion for Three-Component Composite on the Example of Solution of the Bending Plate Problem
The Hybrid Effective Modules of Viscoelastic Composites
Change of Void Volume of Steel Sheet Rough Layer after Deformation by Roll with Given Surface Roughness
Chapter 6: Technologies of Mechanical Processing and Joint of Materials
Researching Signals from Workpiece Backside during Electron Beam Welding in Full Penetration Mode
Simulation of Honing of a Processed Workpiece on CNC Machine
Electron Beam Welding of Dissimilar Materials
Finishing and Hardening of a Flat Surface Ring Area of a Workpiece by Rotary Burnishing
Сomputer Simulation of Machining
Influence of Cutting Tool Wear on Contact Stresses and Temperature Distribution in Titanium Alloy Machining
Split Cutter Method for Contact Stresses Research over Flank Surface of a Cutter
The Structure and Mechanical Properties of VT23 Welded Joints with Surface Layer Modified by Ultrasonic Mechanical Forging
Optimization of Solid Rocket Motor Quenching in Gas Dynamic Tunnels during Firing Bench Tests
Features of the Metal Structure Formation in Cryogenic Equipment during Long-Term Operation at 4.2 K
Chapter 7: Electrochemical Processes and Materials
Performance Characteristics of Solid Oxide Fuel Cells with YSZ/CGO Electrolyte
Electrocatalytic Oxidation of Hydrogen Peroxide on the Graphite Electrode Based on Silver Nanoparticles
The Porous Structure Characterization of Products of Non-Equilibrium Electrochemical Oxidation of Copper and Cadmium
Polymer Membranes for Hydrogen Fuel Cells
Chapter 8: Materials and Technologies of Environmental Engineering
The Oxidative Destruction of Substandard Tributyl Phosphate Organic Solutions under Mild Conditions
Study of the Sorption Properties of Synthetic Sorbents Produced Based on Alumino-Phenylsiloxane
The Electrochemical Method of Oil-Contaminated Soil Remediation
Phytotesting as a Method of Determining the Degree of Eutrophication of Water Objects
Effects of AC Frequency on the Physicochemical Characteristics of Water
Recycling Red Mud of JSC Ural Aluminum Plant with the Recovery of Iron and Construction Materials
The Effect of Drilling Waste on Water Resources - The Elemental Composition of Waste
Electrochemical Recycling of Still Waste Liquid in Ammonia Soda Production
Chapter 9: Organic Chemistry and Biotechnologies
Study of Antigenic Activity of Experimental Samples of the Conjugated Vaccines Based on Synthetic Oligosaccharide Ligands and CRM197 Carrier Protein against Candida albicans, Aspergillus fumigatus and Pseudomonas aeruginosa
Ionic Liquids as Catalysts for the Acetylation of Camphene
Chapter 10: Simulation of Physicochemical Processes in Metallurgical and Chemical Technologies
Optimization of the Blast Furnace Operating Modes for Identification of the Areas of Unimprovable Solutions
Numerical Modelling of the Molten Metal Flow in a Disk Agitator Mixer
Separation Features in Hydrocarbon Media at Thermobaric Regimes of Petroleum Preparation Devices Functioning
Heat Treatment of Crushed Wood in Rotary Drum Dryers
Numerical Simulation of Flow Distribution in the Packed Bed Reactor with the Supply Nozzle Placed on the Sidewall
Analysis of Accumulation and Crystallization of Boric Acid in the Reactor Core during WWER Emergency Operation
The Study of Technological Mode Options for Production of Oil of Required Quality
Chapter 11: Technologies of Rational Use and Processing of Mineral Resources
Composition Development and Production Technology of Stone Casting Silicate Materials and Items
Development of Slag Base for Welding Fluxes from Man-Made Mineral Formations of Ural Mining and Smelting Companies
The Use of the Finite Element Method for Ensuring Efficient and Safe Extraction of Minerals
Ore Mineralization in Adular-Fluorite Metasomatites: Evidence of the Podgolechnoe Alkalic-Type Epithermal Gold Deposit (Central Aldan Ore District, Russia)
The Geochemical Features of Epithermal Gold-Telluride (Au-Te) Ores of the Podgolechnoe Deposit (Central Aldan Ore District, Yakutia)
Methods of Increasing Strength of Aluminosilicate Ceramics Based on Semi-Flint Clay Raw Materials
Comparison of the Projected Results of Coarse Thermal Coal Cleaning in Various Gravity Separation Apparatuses
The Impact of Microwaves of Different Timing on the Structural and Chemical Characteristics of a Carbonaceous Natural Material
Chapter 12: Testing Methods and Numerical Simulation
X-Ray Tomography Simulation Based on Direct Radon Transform
Numerical Simulation of Heat Transfer in a Closed Two-Phase Thermosiphon
A New Approach to the Assessment of the Analysis Method Accuracy
Automatized Control of Polymer Optical Parts
The Use of Electromagnetic-Acoustic Method for Estimating the Stress-Strain State of the Metallic Elements of Power Equipment
The Optimization of Parameters of a Technological Tank Battery for Liquefied Petroleum Gas
Numerical Simulation of the Steady-State Herschel-Bulkley Fluid Flow in a Channel with Sudden Expansion
Numerical Simulation of Newtonian Fluid Flow in a T-Channel with no Slip/Slip Boundary Conditions on a Solid Wall
Use of Acoustic Parameter Measurements for Evaluating the Reliability Criteria of Machine Parts and Metalwork
High Technology: Research and Applications 2016
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
