Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).The aim of this book is to review recent progress in the understanding of the new properties, or unusual combinations of properties, possessed by nanostructured materials; with particular emphasis being placed on interfacial effects.
The contents consist of authoritative contributions to the field of bulk nanocrystalline materials, with especial regard to their mechanics, thermodynamics and kinetics, nanocrystalline optoelectronic and photonic properties, nanomaterial characterization, and the synthesis of nanopowders, thin films and coatings, nanotubes and tips, and polymers.This is a very useful introduction to the possibilities offered by this relatively new class of materials.
Chapter
Diffusion and Plasticity of Submicrocrystalline Metals and Alloys
Internal Friction Study of the Size-Dependent Melting of Pb Inclusions in an Al Matrix
The Strain Induced Cementite Dissolution in Carbon Steel - Experimental Facts and Theoretical Approach
Grain Refinement and Mechanical Properties of Nickel Subjected to Severe Plastic Deformation
Indentation Technique for Determination of Mechanical Behavior of Nanomaterials (Bulk and Coatings)
Influence of Structure on the Microhardness of Ni3Al
Mechanical Properties of the Hard Magnetic Alloy Fe-23wt.%Co-30%Cr in Different Structural States
Magnetically Soft Fe-Co-Based Nanocrystalline Alloys
Nanostructured Al-Mm-Ni-(Fe,Co) Alloys Produced by Devitrification
The Influence of Nanocrystallization of the FeSiB Amorphous Alloy by Means of Nd: YAG Pulsed Laser Heating on its Magnetic Properties
Mechanical Properties of Deformed Interfaces in Bimetallic Joints
Physics of Nanocrystalline Luminescent Ceramics
Size-Controlled Si Nanocrystals for Photonic and Electronic Applications
Mass Transfer in Optical Nanocomposites Induced by Pulsed Laser Irradiation
Linear Electro-Optical Effects in the Hybrid Matrices Polymer/SiC Nanocrystals
Magnonic Crystals — the Magnetic Counterpart of Photonic Crystals
Luminescence of Nanosized ZrO2 and ZrO2: Pr Powders
Structure, Morphology and Luminescence Properties of Pr-Doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
Laser Assisted Formation of SiC Nano-Tips for Field Emission Application
Preparation of Silicon Carbide/Nitride Particulate Nanocomposites with Oxides or Nitrides
Zirconia Nanopowder - Its Shaping and Sintering
Modelling Hydrothermal Synthesis of Ceramic Composite Nanopowders
Room-Temperature Precipitation of Zinc Oxide Particles: Building Submicronic Particles with Nanocrystals
The Size Distribution of Iron Nanoparticles Produced by the Carburisation Process
Preparation of Nanocrystalline Iron Carbide by Reaction of Iron with Methane
Study of the Kinetics of Nitriding of Nanocrystalline Iron Using TG and XRD Methods
Microwave Driven Hydrothermal Synthesis of Zinc Oxide Nanopowders
Microwave – Hydrothermal Synthesis of Nanocrystalline Pr - Doped Zirconia Powders at Pressures up to 8 MPa
Paramagnetic Silver Clusters in Molecular Sieves: Zeolite Rho
Application of Powder Diffraction Methods to the Analysis of Short- and Long-Range Atomic Order in Nanocrystalline Diamond and SiC: The Concept of the Apparent Lattice Parameter (alp)
Studies on Electrodeposited Ni-Mo Nanocrystalline Alloy
Stereology of Grains in Nano-Crystals
Novel Method for Diagnostic the Structural Transformations in Nanostructured Metals
Utilisation of XRD for the Determination of the Size Distribution of Nanocrystalline Iron Materials
Study of Grain Size Distribution in Nanocrystalline Iron Oxides Synthesized by Hydrothermal Method
The Structural and Tribological Properties of Nanocrystalline Electrochemical Coatings with Nickel Matrix
Studies of Amorphous Ni-P Thin Films Produced by the Chemical Reduction Method
Structure Changes Caused by the Stress Gradient in Subsurface Layers of Germanium Single Crystals
Microwave Response of La2/3Ca1/3MnO3 Thin Films
The Influence of the Pretreatment of Si Substrate on the Growth of PbS Thin Films in the SILAR Technique
The Polymeric Layers Formation by Sorption from Organic Solutions
Optimization of the Amount of Catalyst and Reaction Time in Single Wall Nanotube Production
Two-Temperature EPR Measurements of Multi-Walled Carbon Nanotubes
Conductivity of Single-Wall Carbon Nanotubes at Pressures of 20 - 50 GPa
Nanocomposites of Vapour Phase Deposited Teflon AF Containing Ni Clusters
The Dye Activated Polymers with Added Fine Scattering Particles as New Lasing Media
Spectral Properties of the Dye Activated Polymers with Added Fine Scattering Particles
Importance of the Surface Layer for Polymer Materials
Mineral Nanofillers Obtained via Cryogenic Deaggregation Method
Self-Organized Metal-Polymer Nanocomposites
Cluster-Containing Polymers as Precursors for the Synthesis of Polymer Nanocomposites
Frontal Polymerization of Metal-Containing Monomers as a way for Synthesis of Polymer Nanocomposites
Morphology and Properties of Urea-Urethane Nanocomposites Obtained from Crystalline Prepolymers with Different Chemical Structure
Polypropylene Nanocomposites – Preparation and Properties
Effects of Severe Plastic Deformation on the Structure and Physical Properties of Polymers
Materials Research in Poland
Scientific Activity within the Targeted Research Project: 'Metallic, Ceramic and Organic Nanomaterials: Processing – Structure – Properties – Applications'
Interfacial Effects and Novel Properties of Nanomaterials
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
