Chapter
The Effect of Temperature Fluctuation on the Formation of Billet Surface Defect in the Initial Solidification Area
Simulation and Experiment Study of Hybrid Actuators Five-Bar Mechanism Kinematics Parameter
CC Path Generation Method in 5-Axis Surface Machining with a Flat-End Cutter
Study on Roadbed Deformation Rule and Assessment of Slab Track on Railway Passenger Special Line
Modeling and Simulation of Temperature Field of Nano-Zirconia Ceramics Precision Grinding
Modeling and Simulation of Hydrodynamic Pressure in Cutting Zone
Analysis of Defects of Aluminum Alloys in the Lost Foam Process and Prevention Methods
Numerical Simulation and Die Optimal Design of a Complex Section Thin-Walled Aluminum Profile Extrusion
Pb Finite Element Analysis for Profile Wear of Rolling Radial Tire with Camber Angle
The Effect of Calculating Gridding Size on the Formation of Multimode Penetrator
New Discrete Particle Swarm Algorithm for Traveling Salesman Problem
Research on the Prediction Model of Laser Surface Hardening Index on Cylinder Liner Based on RBF
Improving the Qualified Rate of Coloring Inspection about the Bevel Gear in Centrifugal Ventilator by Applying Six Sigma Methodology
Experimental Investigation on Determinant of Steel Specimen Transformation Temperature under Air Cooling Conditions
Numerical Simulation and Experimental Study of AZ31 Magnesium Alloy Deformation Behavior in ECAP
Structure and Electrical Properties of Lead-Free (Bi0.5Na0.5)TiO3-Ba(Sn,Ti)O3 Ceramics
Preparation of Pb/Polyaniline Coating Electrode and its Electrocatalytic Effect on Anodic Oxygen Evolution
Tailor-Welded Blanks Manufactured and Stamping Properties of Magnesium Alloy
Specific Energy Requirement for Compacting Corn Cobs
Development of High Strength Hull Plate by Normal Hot Rolling and High Rate Cooling Process
Preparation of a Sulfate-Based Complex Coagulant from Boiler Slag and its Application in Domestic Sewage Treatment
Lubricating Characteristics of Circular Tilting Pad Thrust Bearing
The Application of Newton Iterative Calculation for Cold Rolling Control
Effect of Ambient Temperature on Wear of Cemented Carbide Tool Material
Quantitative Evaluation on Influence Factors of IC Chip's Image Characteristics Based on Fuzzy Gray Theory
Multi-Component Gas-Liquid Equilibrium for Hydrogen Production from Glucose Gasification in Supercritical Water
Numerical Simulation Study on Damage Mechanism of Throat Armor
The Study on Mixed-Combustion of Diesel-Biodiesel Oil in Different Proportions
Research on Accuracy Analysis and Simulation for Typical Parts with PRS-XY NC Hybrid PMT
Influence of the Performance of Power Ultrasonic Transducer on its Front Cover Shape
Implementation of Low Rate, High Accuracy Broadband Signal Sampling by Using Adaptive Beam Forming Technique
The Design of Bending Parts Compound Die
A Computation Software on Diffusion and Solid State Reactions Kinetics
The Equation of Instantaneous Speed Ratio between Roller and Workpiece
Analysis on Thermal Efficiency and Softening Behavior of MIG Welding with Longitudinal Magnetic Field
Effect of Forward Extrusion and Heat Treatment on Microstructure and Mechanical Properties of as-Cast ZK60 Magnesium Alloy
Preparation of Suspended Liquid Hardener for No-Bake Phosphate Binder Sand
Research on the Feasibility of Ion Nitriding for Inside Walls of Big Length-Radius-Ratio Oil Pipelines
Effect of Heat Treatment on Microstructure and Mechanical Properties of Semi-Solid Formed Magnesium Alloy AZ91D
Applied Research of Simulation Method in Calculate the Hit Probability of Acoustic Homing Torpedo
Numerical Simulation of Intermediate Cooling Temperature Field in Controlled Rolling
Applications of Efficient Energy-Saving Cement Grinding Technology and Equipment
Research on Mathematical Model of Leveling Process for Plate Mill
Design of a Novel Experimental Appratus for Simulating Large Tectophysics Based on the Similar Theory
Airport Gate Assignment Model Based on Gate Occupied Efficiency
Effects of Hydrogen on Machinability of BT25y Alloy
A Decomposition Modeling Method of 3D Assembly Process Planning and Simulation for Airplane Subassembly
Hybrid Genetic Simulated Annealing Algorithm with its Application in Vehicle Routing Problem with Time Windows
Simulation and Experimental Research of Adaptive Control with Constant Pressure on Large-Scale Titanium Alloy Composite Plates
Thermal Transport of an Electrically Conducting Fluid over a Stretching Sheet in Manufacturing Processes
Fabrication and Research of Electroless Nickel Plating on Carbon Fiber with Palladium-Free Activation
Fabrication of Cu-Al2O3 Composites by Simplified Internal Oxidation Process
Grey Model Based Particle Swarm Optimization Algorithm for Fatigue Strength Prognosis of Concrete
A Mathematical Model for Gas Transmission through Modified Atmosphere Packaging (MAP) Film
Test of IGBT Transient Thermal Impedance and Modeling Research on Thermal Model
The Superplastic Deformation and Microstructural Analysis of Fine-Grained 1420 Al-Li Alloy
Effect of MAP on Quality of Rice for Super-Long-Term
Investigation on Micro Defects of the Protective Coating SiOx in Mass Manufacturing Processes
Laboratory Evaluation and Application of New Materials Based on Mud Cake to Agglomerated Cake (MTA) Method
CAD of Gating System for Injection Mold Based on the Secondary Development Technology of PRO/E
Study on Inclinable-Pour Process of No-Bake Resin Sand Mould
Research on Effect of Aggregate Variety on Concrete Volume Deformation
Flame Retardancy of Wood Treated with Metaborates by Double-Diffusion Method
Experimental Investigation on Air-Aided Water EDM
Study on Surface Modification of Feed Bulking Machine Extuding Screw
Loads Calculation of Pitch Bearing of Wind Turbine
A New Type Dynamic Vibration Absorber to Reduce Broad-Band Vibration in Plates
The Application of Nanotechnology for Green Manufacturing
Effect of Water Rinsing Temperature for Steel Substrate on Corrosion Behavior of Hot-Dip Aluminizing Coatings
Design Optimization of Flame E-Retarded Plastics Pyrolysis
Preparation and Selective Laser Sintering Mechanism of Polymer-Coated Mo Powder
Combined Forecasting Model on Automotive Logistics Demand Based on RBF Neural Network
New Continuous Model of Reynolds Equation for Gas Film Lubrication
An Stress Correction Method Applied to Doubly Curved Composite Laminated Plate
Dynamic Characteristic Analysis and Machining Error Study Based on Solid Vibration Beam Rate Sensor
Semi-Analytic Solutions of Dynamic Response of Pavement Plate on the Elastic Foundation
Effect of Pulling Velocity on the Unidirectional Solidification Phenomenon of DZ417G Superalloy
Dynamic Response of the Steel Bridge Deck Thin Surfacing due to Vehicle Load
The Key Supporting Technologies for the Sustainable Development of Advanced Manufacturing Technology
Effect of Heat Input on Microstructure and Properties in Heat Affected Zone of ASTM A572 GR.65 Steel
The Analysis of Scenario Characteristics in Life Cycle Assessment
Influence of Roll Speed Schedule on Continuous Tube Rolling Process of Semi-Floating Mandrel Mill
Development and Application of Dynamic Secondary Cooling Control Model for Beam Blank Casting Based on FEM
The Experimental Study on a New Kind of High Temperature Solid Lubricant Coating
Microstructure and Mechanical Properties of 6061 Aluminum Alloy Processed by Multi-Pass ECAE at Room Temperature
A Newly Solve Project on Rupture of Connected-Mold Bearing of Roller Foam Machine Based on Finite Element Theory
Numerical Study on Influences of Process Parameters on Laser Tube Bending
Continuous Modeling of Re-Entrant Manufacturing Systems
Finite Element Analysis and Structural Optimization of Heavy-Duty Truck's Carriage
Effect of Incident Angle on Laser Transformation Hardening Layer Microstructure and Properties
An Extended Design Platform Identification Method
The Research on Thermal-Mechanical Coupling Simulation of Steam Turbine Vane Material’s Cutting Process
Study on Friction and Wear Properties of Plasma and Laser Coatings of Aluminium Bronze Powder
Laser Clad Geometry: Experimental Observation and Geometric Modeling
Effects of Process Parameters on the Adhesion of Sputtering Protective Coating of Gd
Microstructures and Properties of the Al-4.5Zn-1.5Mg-0.5Mn Aluminum Alloy Welding Joints
GMI Effect of FeCoSiB Amorphous Ribbon
Structural Kinematics and Error Law Research of 5-Axis Turning-Milling Complex Centers
Numerical Approach in Predicting the Formation Process of Tandem Explosively Formed Projectile
High Energy Shot Peening of Commercially Pure Titanium TIG Weld Joint
Effect of Melt-Casting Temperature on Bonding Zone of CuNiMnFe30CrMnSi Integral Material
Titanium Positive Plate Manufacturing Process and Denitrification Mechanism
Preparations and Properties of Amorphous/Nanocrystalline Ni-Mo Alloy Coating Obtained by Electrodeposition
Preparation and Characterization of Inorgano-Organo-Montmorillonites and its Adsorption Capacity for Phenol in Water
Multistage Cold Extrusion Process and Forming Rules of Shaft Parts Used in Gearbox
The Quick and Practical Algorithm for Spiral Line Interpolation
Surface Based Virtual Mechanical Equipment Modification
Study on Chemical Conversion Treatment and Electroless Nickel Plating on AZ91D Magnesium Alloy
Study on Optimum Product Portfolio of Coach Board for Metallurgical Enterprise Based on Four-Dimensional Analysis Method
Numerical Optimization Design on Coating of EPC Steel Casting
Study on Surface Quality of Lead Clad Tin Bimetal Continuous Casting by Air Pressing Core-Filling
Effect of Ce on Vitriol Corrosion Resistance of Aluminum Bronze Alloy Coatings
Stress Analysis and Formability of Sheets in Semi-Ball Bottom Cylindrical Deep Drawing
Magnetic Field on Properties of Solid Lubricants Coating on High-Speed Steel Surface
Preparation and Properties of Thin Walled Copper Tube by a Short Process Method
Synthesis and Magnetic Properties of La-Doped Ni Ferrites
Tribological Properties of Titanium Surface Alloyed 316L Stainless Steel
Numerical Study of Shaped Charge Jet Formation and Penetration into Multi-Layer with Different Liner Material
The Synthesis and Properties of a Novel Solid Polyphosphazene Electrolyte for Lithium Ion Battery
FEA of Fatigue Behaviour of Adhesively Bonded Joints
Designing on Magnetic Seal Ash-Unloader without Abrasion
Design of the Parametric Simulation Program for Multi-Point Forming Based on APDL
Numerical Simulation in Deep Drawing of Cylindrical Cup with Circular Diving Equally Small Holes on Edge of Circle Blank
Fatigue Failure of Silicon Nitride Ceramic Balls
The Effect of Initial Microstructure on Surface Nanocrystallization of Quenched and Tempered Steel
A Feasibility Study of Electro-Spark Deposit 'Sandwich-Like' Coating on Thermal Sensitive Superalloy
Synthesis of Tetrapod ZnO by Direct Oxidation of Zinc Metal at Elevated Temperature
Green Catalyzing Transesterification of Soybean Oil with Methanol for Biodiesel Based on the Reuse of Waste River-Snail Shell
Microwave-Irradiated Preparation of Super Absorbent Resin by Graft Copolymerization of Cellulose and Acrylic Acid/Acrylamide
Different Number of Shares and Twists Effect to the Sensing Performance of Conductive Yarns Contains Coated Carbon Fibers
Study on Preparation of Oil-Based Fe3O4 Nano Magnetic Fluid
Whole Field Structural Health Monitoring by Polymer-Matrix Carbon Fiber Smart Layer
Direct Slicing Cad Models with Solidworks for Integral Stereolithography System
Morphology Control of PbWO4 Crystals in Formamide/Water Solution
Magnetorheological Fluid for Levitation Migration Technology
Synthesis and Luminescence Properties of Ce4+-Doped ZnO
Study on Current Transform Features of Single-Molecule C60 Based on Band Theory
Nano-Al2O3 Film Prepared on Porous Silicon by Sol-Gel Method
The Preparation and Photocatalytic Activity of Ni-Doped ZnS Nanoparticles
Ethylene Glycol Assisted Hydrothermal Synthesis of Flower-Like and Sphere-Like ZnO
Finite Element Analysis and Optimization of Deformation Behavior for Spur Gear Warm Forging Process
Effects of Processing Parameters on the Temperature Field of Melts in Aluminothermic Reaction to Prepare Bulk Nanocrystalline Fe3Al
Removal of Heavy Metal Ions from Water Using Porous Nano-Barium-Stroutium Titanate as an Adsorbent
Allometric Scaling Relationship between Solution Concentration and Nanofiber Diameter in Bubble Electrospinning and its Experimental Verification
Fabrication and Mechanism of Titania Nanotube Arrays by Anodization in DMSO Electrolyte
Mechanochemisitry Synthesis of Al-Rich Layered Double Hydroxides
Analysis and Design of Magnetorheological Damper
Fabrication of PST Nanotubes with Sol-Template Method and its Usage in Aluminum Foil Capacitor
Synthesis, Characterization, and Microwave Absorption Properties of SrFe12O19 Ferrites and FeNi3 Nanoplatelets Composites
Effects of a InGaAs Strained Layer on Structures and Photoluminescence Characteristics of InAs Quantum Dots
Hydrothermal Synthesis and Characterization of PbTiO3 Microrods
The Application and Development of Intelligentized Concrete
Preparation and Capacitance Properties of Titania Nanotube Arrays
Preparation and Characterization on Self-Catalytic of SnO2 Nanowire Junctions
Preparation of CuO-CoO-MnO/SiO2 Nanocomposite Aerogels and the Effect of Synthesis Conditions on Gelation
Effect of Preparation Methods of HPW/SiO2 Mesoporous Composites on its Catalytic Performance in Fuel Oils Desulfurization
Preparation and Characterization of Cordierite Powder via Tween-80 Modified Citrate Sol-Gel Method
Intelligent Control and Simulation of Piezoelectric Smart Plate
Template Assisted Ultrasonic Process Synthesis and Luminescent Properties of Eu3+ Doped LaPO4 Nanocrystals
Analyzing and Counter Plan Researches on Technical Index of Wire Electric Discharge Machining Based on the Surface Quality Issues
Magnetic Nanoparticles Derivatized with Dual Functional Groups for Environmental Applications
Study on Strip Winding Machine for Prestressed Cold Forging Die
Nitrogen-Incorporated NaY Zeolite as Promising Basic Microporous Catalytic Material
Synthesis of Tungsten Oxide Nanorods as Visible-Light-Driven Photocatalysts
Synthesis of Highly Mono-Dispersed Mesoporous Silica Spheres
Simulation and Experiment Based on the Mixed Robust Optimal and H∞ Controller of PMLSM
Manufacturing the Hybrid Materials of Polypropylene/Nano Poly(Phenylsilsesquioxane) with Good Thermal Stability
Preparation and Field Emission Properties of Ag-CNTs by Electroless Plating
Research on the Pavement Performance of Recycled Asphalt Mixture Processed by Microwave
Drug Release Behaviors of a Novel Ph/Temperature Responsive Hydrogel with Jujube Cake-Like Structure
Synthesis and Magnetic Properties of CoFe2O4 Nano-Particles
Effect of α-Al2O3 Nano-Additives on Properties of Anodic Oxide Films on AZ91D Magnesium Alloy
C, S & N-Doped TiO2 Photocatalyst Prepared by the Reverse-Microemulsion Method
Synthesis of CuO Nanocrystals in a Water-Isopropanol System
Preparation and Ferroelectric Properties of (Ba0.7Ca0.3)TiO3 Ceramics
Synthesis and Characterization of Fibular PANI/Nano-CeO2 Composites
Controlled Grafting of S-Naproxen Imprinted Layer on PVDF Microporous Membrane by ATRP
Microencapsulation of Epoxy Resins for Self-Healing Material
The Magnetic Properties of Mixed Ferrimagnetic Spin System
WO3-Based Sensor Based on Hall Effect for NO2 Detection: Designed and Investigation
Preparation, Characterization and Tribological Evaluation of Calcium Borate Nanoparticles as Lubricant Additives
Study on Probabilistic Optimal Design of Diaphragm Spring
Preparation and Characterization of (Ba0.88Ca0.12)(Zr0.12Ti0.88)O3 Powders and Ceramics Produced by Sol-Gel Process
Sol-Gel Synthesis and Characterization of BaAl2O4 and Co: BaAl2O4 Nanoparticles
Study on Wall Thickness Eccentricity of Seamless Steel Tube
Robust Multiscale Design Using PATC and WSRSM
Nanometer Anatase Titania Synthesis by Reverse Titration Method and Evaluation of their Photocatalytic Activity
Improved Photoelectrochemical Properties of Cu-Loaded TiO2 Nanotubes
Fluorescent Properties of Zn-Al Hydrotalcite and its Modified Products
Structure and Dielectric Tunability of Ba (Ti1-yZry)O3 Ferroelectric Ceramics
Novel Base Catalysts by Nitridation of Zeolite Y: Characterization and Catalytic Evaluation
Preparation and Characterization of the Oxime Carbapalladacycle Complex Grafted onto Mesoporous SiO2@Fe3O4 Nanocomposite for the Heck Reaction
The Effect of Underfill Fillet Geometry to Die Edge Stress for Flip Chip Packaging
Study and Application of Nano Antibacterial Technology on Nonwoven Materials
Formation of Tricalcium Silicate Prepared by Electric and Microwave Sintering
Preparation of Nano-FeXOY by Thermal Decomposition Method and Morphology Research
Nanoindentation Approach for Evaluation of Process Parameters Effect on the Strength of Bonded Au Ball Bonds
Influence of Carbon Nanotubes on the Performances of LiFePO4
The Applications of Electrospun Nanofibers in the Medical Materials
Structural, Magnetic and Microwave Absorbing Properties of Nanosized NiXZn1-xFe2O4 Powders Synthesized by Sol-Gel Technique
Preparation and Characterization of C@PSt Microspheres by High Speed Homogenization-Assisted Suspension Polymerization
The Microwave-Assisted Preparation and Properties of SiO2 Aerogels by Fractional Modification
Nanoindentation Test for the Strength Distrubution Analysis of Bonded Au Ball Bonds
Synthesis of Carambola-Like CuO via a Chemical Bath Method
Numerical Simulation in Rear Axlecap of Automobile Drawing Process and Optimization of Technological Parameters
Characterization of Surface Strengthening Layer of 7A52 Aluminum Alloy by Supersonic Shot Peening and its Tribological Prop
A New 4H-SiC MESFET Utilizing N- Shielding and Field Plate Techniques Simultaneously
Autothermal Gelation Synthesis of Uniform Titania Nanoparticles
Molecularly Imprinted Polymer Microspheres Prepared by Precipitation Polymerization for Atenolol Recognition
Simulation and Test for Two Airfoils with Wind Guide Vane of VAWT
Hydrothermal Synthesis, Characterization and Photocatalytic Properties of Zn/Sn-Composite Oxides
Synthesis of Uranium Doped TiO2 Nanomaterial and its Visible Light Degradation Property
Preparation of a Novel Functionated POSS Nano-Particle Bearing the Perfluoro Aryl Ether Dendron
The Parametric Mesh Method Based on History and Process Parameters Optimization
Electrical Properties of La2O3-Doped BaTiO3 Ceramics
Synthesis of Intelligent Polymer Modified Iron Nanoparticles for DNAPL Recovery
Activated Carbon from Bituminous Coal by Microwave-Assisted Heating in Different Gas Media for Supercapacitor Electrodes
A Low Phase Noise Voltage-Controlled Oscillator with Harmonic Suppression Based on LTCC Technology
Fuzzy Synthesis Evaluation of Weld Bead Stability for GMAW Prototyping
Numerical Study of Dynamic Response of Steel Deck Pavement on the Bascule Bridge
Electrochemical Properties of Nano Spinel LiCoXMn2-xO4 Prepared by Sol-Gel Process
Thermo-Decomposition Process of Preparation of Nanometer Cobalt Ferrite Oxides and their Doped into Peg-20000
Preparation of TiO2 Supported Gold Nano-Clusters by Photo-Deposition
Synthesis of Titania in a Spinning Disk Reactor
Luminescence of Cu2+-Doped ZnSe Quantum Dots with Different Parameters
Self-Assembly of a Novel Cationic Porphyrin-Anthraquione Hybrid Investigated by Scanning Tunneling Microscopy
Optimization of Nanostructures of Activated Carbon by Mechanical Methods
Poly (Divinylbenzene) Particles of Large Specific Surface Area Prepared by Dispersion Polymerization
Technology of Ferroelectric Electron Emission
Gurtin-Type Quasi-Variational Principle of Intelligent Structure Based on Nonlinear Theory
Controllable Growth of Ultrafine Silica Particles
The Hamilton-Type Variational Principle of Electro-Magneto-Thermo-Elasticity
Preparation of Titania with Different Morphologies
Large-Scale Patterning and Electric Test of Silver Nanowires by Microfluidic Hydrodynamic Focusing
Field Emission Characteristics of FED with Carbon Nanotube Field Emitters Using Improved Cathode Electrode
Fabric Defect Detection Based on SRG-PCNN
Experimental Preparation and Properties of Modified CNT Field Emitters for the Field Emission Display Panel
Synthesis and Characterization of Hollow Core-Shell ZrO2@void@BiVO4 Visible-Light Photocatalyst
Gelling Process of Ultrafine ZrO2 at Room Temperature
Inhibition Action and Adsorption Behavior of 3-Amino-1,2,4-Triazole on Copper in 3% NaCl Solution
Mechanosynthesis of Silicon Nitride Nanowires
Inhibition Action and Adsorption Behavior of PESA on Copper
Numerical Simulation in Deep Drawing of Cylindrical Cup with Elliptical Shape Die Shoulder
Experiment Study on the Mechanical Properties of Shape Memory Alloy
Fabrication of Various ZnO Nanostructures and their Photoelectric Properties
Preparation and Properties of a Novel Azobenzene-Based Polyacrylamide Hydrogels with Photoresponse
Preparation and Influence Factors of SO42-/ZrO2 Nanotube Catalyst
Size Controllable Synthesis of Magnetite Fe3O4 Nanoparticles
Microstructure and Dielectric Properties of Ni2+-Doped (Ba,Sr)TiO3 Ceramics
Intelligent Health Monitoring System for a Railway Cable-Stayed Bridge
Synthesis, Characterization and Properties of Poly (ε-Caprolactone) Glycol Based Casting Polyurethane Elastomers Containing Nano-Size Sio2 Particles
The Synthesis of Multi-Morphologic Nickel Sulfides Nanostructures by a Solution Chemical Route
A Low Temperature Precursor Sulfuration Route to Metal Sulfides Nanomaterials
Preparation and Properties of Electrospun Cellulose Acetate Nanofiber Mats
Preparation of Cu-Zn Alloy by High Energy Ball Milling of Elemental Copper and Zinc
Effect of Ultrasonic Disperse on the Properties of Carbon Nanotubes Supercapacitors
Asymmetry Analysis of Water Level Measured on Two Ends of Drum Boiler
Drug Release Behaviors of a pH/Temperature Sensitive Hydrogel Bead with Core-Shelled Structure
Nanofibrous Membrane of Silk Fibroin/Cellulose Acetate Blend for Heavy Metal Ion Adsorption
Synthesis of CuInxGa1-xSe2 Powder by High-Pressure Stirring Solvothermal Method
Influence of External Factors on Anisotropic Growth Habit of ZnO Crystal
Effects of Synthesis Parameters on Hydrothermal Synthesis of NaA Zeolite
A pH/Temperature-Sensitive Semi-IPN Bead for Drug Release Carrier
Synthesis of HfC Powders by Carbothermal Reduction of Modified Hafnium Alkoxide Precursors
Optimum Design of a Kind of Split Type Compound Vessel Used in Ultrahigh Pressure Technology
Study on the Shape Memory Effect of Styrene Copolymer
Synthesis, Characterization and Photocatalytic Activities of Bismuth Vanadate by Facile Co-Precipitation Method
Photoactivity and Hydrophilicity of B and Ni Co-Doped TiO2 Films
Ferroelectric and Piezoelectric Properties of (1-x)BaTi0.8Zr0.2O3-xBa0.7Ca0.3TiO3 Ceramics Prepared by Sol-Gel Technique
Synthesis of Self-Healing Microcapsules via Different Heating Profiles
Study on Preparation of Mesoporous Silica Aerogels with Low Density and High Properties via Ambient Pressure Drying
Synthesis of Nanosized Ag0.9Na0.1(Nb0.7Ta0.3)O3 Ceramic Powder and Investigation on its Property
Water Disinfection Using Fe3+ and N-Doped 3SnO2/TiO2 Thin Films Coated on Glass Fibers
Synthesis and Characterization of Coordination Nano-Material Containing Vanadium with Helical Stracture
Sulfur-Loading Impact on Microstructure and Surface Morphology of Fly Ash-Based Adsorbent for Mercury Removal
Experimental Study on Extraction of Vanadium from Stone Coal by Microwave Pretreatment
Preparation and Application of Slag Compound Flocculant
A ZigBee-Based Smart Home System: An Energy-Saving Method
Study on Reverse Micro emulsion Method Applied in Preparation of Catalyst MnBaAl11O19-δ for Dimethyl Ether Combustion
Effect of Bi1.5ZnNb1.5O7 Nanopowder on its Ceramic Properties
Preparation of Fluorine Doped TiO2 Photocatalysts and its Photocatalytic Activities under Simulate Sun's Rays
In Situ Fabrication of Nanoscale Graphene Oxide/Polyaniline Composite and its Electrochemical Properties
Effect of EDTA on the Morphology and Size of SrCO3 Particles during Crystallization
Synthesis of ITO Nanoparticles by Liquid Phase Co-Precipitation Method
Creep Properties of High Cr Resisting Weld Metal Alloyed with Co
Synthesis and Characterization of a Novel Superabsorbent Polymer Based on Konjac Glucomannan
Fabrication of the Ordered and Sandwich Structured Polyaniline/Graphene Nanoarrays
Synthesis and Characterization of Li-Ti-O Nano-Composites and Their Doped BaTiO3 Based X7R-Type Ceramics
Effects of ZnO-Bi2O3-B2O3-SiO2 Glass Additive on Dielectric Properties of CaO-Li2O-Sm2O3-TiO2 Microwave Dielectric Ceramics
Facile Synthesis of Hydroxyapatite Nanorods with Controlled Sizes and Morphologies
Effect of Different Compacting Processes on the Microwave Sintering Behavior of LaNbO4/MoSi2 Composites
Characterization of Hemp Fiber Using Microwave-Assisted Extraction (MAE) Pretreatment
Electrochemical Fabrication and Characterization of Highly-Ordered Titania Nanotube Arrays
The High Thickness Ni Layer on Single-Walled Carbon Nanotubes Prepared by an Electroless Coating Process
Fiber Bragg Grating Temperature Sensor System on a Twin-Deck Continuous Rigid Frame Bridge for Long Term Monitoring
Synthesis and Properties Study of Pr Doped(Bi0.5Na0.5)TiO3 Produced Using the Soft Combustion Technique
Photocatalytic Characteristics of Nano TiO2 Doped by Iron (III) and Nitrogen
Synthesis of High Surface Area Porous Silicon Carbide by Employing Soft Template in the Sol-Gel Process
Finite Element Analysis on Stress and Strain of Embedded Fiber Bragg Grating
Finite Element Analysis on Stress and Strain of Protected Fiber Bragg Grating
Analysis of Cylindrical SMA Fan Clutch
Study on Ultrasound Assisted Preparation of Nano Rice Starch
Effect of N-Isopropylacrylamide on the Structure and Swelling Behavior of Microporous Polyurethane Film
Preparation, Characterization and Photocatalytic Properties of Flower Like Bi2WO6 under Solar Light Irradiation
Simulation for Polymerization Process of Styrene Butadiene Rubber (SBR)
Preparation and Properties of Attapulgite / Natural Rubber Micro - Nano Composites
Research on Fitting Curve's Characteristics of Turbulence Motion Locus Based on Image Projection Transformation and Light Stream Vector
A Numerical Simulation of the Electromagnetic Hot-Top Casting of 6063 Aluminum Alloy
Effects of Welding Chamber Step on Extrusion Process of a Complex Hollow Profile
Effects of the Parameters of Friction Stir Processing on Silicon Particles and Hardness in Hypereutectic Al-Si Alloys
Experimental Investigations of the High-Temperature Phase Relationship and Ordering Transition in Ni-Mn-Ga Ternary System
Grain-Refining Mechanism of Heavy Cold-Rolling of Lath Martensite
Structural Optimization and Verification for SPF/DB Process
The Absorption of TiO2 Nanotube-Dye Sensitization Solar Cells by Thermo-Compression Systems in Dye Molecules
An Experimental Study on the Characteristics of Chemically Synthesized Nano-Cement for Carbon Dioxide Reduction
Effects of Nanoclays on the Biodegradable Nanocomposite
Optimization Design of Extrusion Die Channels for Polymer Profile
Research on Performance of New Pressing Binder in Hardmetal
A Review on Fabrication Methods of High-Quality Graphene Nanoribbons
The Effect of Helix on the Nonlinear Analysis of Threaded Connection
Friction Property of HDPP Modified with Talc under the Dry Friction Condition
Thermodynamic and Kinetic Analyses of Calcined Kaolin Precursors Used for Synthesis of Mullite Nanocomposite
Effect of Anion Impurity on Preparing Xonotlite Whiskers via Hydrothermal Synthesis
Manufacturing Processes and Systems
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
