Description
This volume consists of the selected papers presented at 6th International Conference on Material Science and Engineering Technology (ICMSET 2017, October 20-22, 2017, Seoul National University, Seoul, Korea) and addressing diverse topics related to recent trends in materials science and processing and synthesis technologies. We hope the volume will offer the readers a good opportunity to access the state-of-the art developments and future directions of researches on materials science and engineering technology.
Polymers, Composites, Materials for Electrochemical Devices and Sensors, Graphene, Nanocomposites, Metals, Alloys, Materials Processing, Synthesis, Building Materials
Materials Science
Chapter
Dynamic Mechanical Thermal Analysis of High Density Polyethylene Reinforced with Nanodiamond, Carbon Nanotube and Graphite Nanoplatelet
Properties of Sago Starch-Based Biopolymers with Clay, Cellulose, Zinc Oxide and Chitosan Fillers
Short Review: Potential Production of Acacia Wood and its Biocomposites
Heat Treated Luffa - PLA Composites: Effect of Cyclic Moisture Absorption and Desorption on the Mechanical Properties
Determination of Fracture Toughness of PMMA under Impact Loading Using Izod Impact Tester
Mechanical Properties of Herbal Patches from Chitosan-Based Polymer Blends for Medical Applications
Chapter 2: Materials for Electrochemical Devices and Sensors
Design and Fabrication of Thick Film Dissolved Oxygen Sensor Based on RuO2 Working Electrodes for Water Quality Monitoring
Effect of Heat Treatment Condition on the Characteristics of MnO2 Added-Fe2TiO5 Ceramics for NTC Thermistors Using Local Iron Oxide
Effect of S:Fe Molar Ratios on the Direct Formation of Nanocrystalline Pyrite FeS2 Thin Films by Chemical Spray Pyrolysis under a Low Substrate Temperature (< 300 °C) for Biosensor
Sintering Temperatures Investigation on the Electrical Characteristics of Fe2TiO5/MnO2 Ceramics-Based NTC Thermistor
Preparation of Nano-Structured Cathode for Proton-Conducting Fuel Cell by Dispersing Agent-Assisted Sol-Gel Method
Synthesis and Characterization of Porous NiO/YSZ Electrode Materials Using Different Pore Formers
Synthesis, Structure and Transport Properties of Novel Chlorine-Doped Perovskite Based on Ba2CaNbO5.5
Preparation of Porous LSM/YSZ Composite with Varying Grain Size of YSZ Precursor Using Solid State Reaction Method
Chapter 3: Carbon and Carbon Based Materials
Study on Industrial-Scale Fabrication of Graphene Nanoplatelets (GNPs) from Natural Graphite
Effect of SiC Whiskers on the Microstructure and Thermal Conductivity of Carbon Foam
Study on Morphological, Optical and Electrical Properties of Graphene Oxide (GO) and Reduced Graphene Oxide (rGO)
Enhanced Dielectric and Electrical Properties in Polyurethane Composites with Graphene Nanosheets
Synthesis of Filamentous Carbon Material via Decomposition of CF2Cl2 over Self-Organizing Ni-Cr Catalyst
Chapter 4: Nanomaterials and Nanotechnology
Nitrate Reduction Using As-Synthesized Nanoparticles Zero Valent Iron (NZVI) at Ambient Environment
Laponite Nanoparticle as a High Performance Rheological Modifier in Water-Based Drilling Fluids
The Synthesis of Super-Hydrophobic Nano-Silica and its Effect to the Surface Wettability of Sandstone
Short Review: The Effect of Reaction Conditions on Plant-Mediated Synthesis of Silver Nanoparticles
Sol-Gel Synthesis of Nanostructured Alumina Supports for CO Oxidation Catalysts
Synthesis and Characterization of Nanocrystalline M-Mg-O and Carbon-Coated MgO Systems
The Effect of Milling Time on the Size of Silica Particles from Silica Sand
Spectroscopic, Structural, and Morphology of Nickel Oxide Nanoparticles Prepared Using Physalis angulata Leaf Extract
Chapter 5: Technologies in Chemical Engineering
Application and Research of High Molecular Carboxylates in Desulphurization System of Thermal Power Plant
Enhanced Adsorption Properties of Ag-Loaded β-Zeolite towards Toluene
Effect of Particle Size and Chitosan Loading on Post-Combustion Carbon Dioxide Capture of Chitosan-Coated Natural Zeolite Adsorbent
Study of Photodegradation of Methylene Blue by Microbial Synthesized ZnS Material
Chapter 6: Metals and Alloys
Assessment of Corrosion Behavior in Artificial Saliva of Wires for Orthodontic Applications
Effects of Zr on the Microstructure and Mechanical Properties of 6061 Alloys
A Comparative Study of Delayed Hydride Cracking in Zr-3.5Sn-0.8Nb-0.8Mo and Zr-2.5Nb
Effects of Manganese on the Microstructures, Mechanical Properties and Deformation Characteristics of Cu-29Zn Alloy
Numerical Studies on Low-Velocity Impact Failure Response of Al 1100 under Blunt and Hemispherical Impactors
Selective Grain Growth and Grain Boundary Character Distribution Relationships in Magnetostrictive Fe-Ga Thin Sheets
Chapter 7: Materials Processing
Wear Resistance Improvement by Nanostructured Surface Layer Produced by Burnishing
Goss Texture Formation by Asymmetric Rolling in Steel Sheet
Effect of Cold Rolling on the Microstructure and Hardness of Al5Cr12Fe35Mn28Ni20 High Entropy Alloy
Influence of Heating Friction Stir Spot Welding Process Parameters on Steel Aluminum Forming Quality
Corrosion, Wettability, and Adhesion of Acrylic Coatings Containing Silane-Treated Mineral Fillers on Carbon Steel
Servo Forging Technology and Mold Development of the Pulley of AISI-1010 Low Carbon Steel
Effects of Formulation and Temperature on the Rheological Behavior of Nitroguanidine-Based Propellants
Numerical Simulation of Extrusion Molding of Single - Hole Propellant
Multi-Objective Optimization of Bi-Layer Metallic Sheet Using Pareto-Based Genetic Algorithm
An Error Compensation Method for Rectangular Window Based on NURBS Reconstruction Theory
Comparative Study on Energy Saving of Low-Carbon Materials in Sanitary Ware Development
Chapter 8: Building Materials and Structures
The Influence of Fly Ash and Aggregates Composition on Pervious Concrete Characteristics
Reutilizing Sediment Soil Wastes from Water Supply Treatment Process as Replacement Materials of Non-Fired Wall Tiles
Roles of Calcium in Geopolymer Containing Paper Mill Sludge Ash
Modal Stress Analysis of a Cracked Woven Composite Beam under Compression
Preliminary Experimental Investigation on the Strength and Air Permeability of Reactive Powder Concrete
Mechanical Characterization of a Thick-Walled Viscoelastic Hollow Cylinder under Multiaxial Stress Conditions
Properties of Non-Autoclaved Aerated Concrete with Quadruple Cementitious Mixture Using Response Surface Method
Thermal Conductivity of Aerated Concrete Based on Response Surface Method
Material Science and Engineering Technology VI
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
