Description
This volume was created by results of 2017 Spring International Conference on Material Sciences and Technology (MST-S, April 18 - 20, 2017, Chengdu, China) and dedicated to solve the different engineering problems from area of synthesis different materials, industrial processing technologies, metallurgical processes and chemical technologies. We hope this edition will be useful for many engineers and researchers from different areas of modern manufacture.
Nanomaterials, Semiconductors, Polymers, Composites, Ceramics, Metalurgy, Processing Technology, Chemical Engineering
Materials Science
Chapter
Au Nanoparticles Doped TiO2 Mesoporous Perovskite Solar Cells
Efficient SERS Substrate Fabricated by Simple Aluminum Pits Template
Graphene Oxide PMMA Solid on the Absorption of Lead Ion
Two Step Deposition of Ag Doped ZnO Film
Chapter 2: Polymers, Composites and Ceramics
Why Synthesizing Poly(1,4-Phenylene Sulfide) through Oxidative Polymerization Has not so far Been Adopted as the Industrial Process
Preparation and Properties of Cross-Linked Polysiloxane Microspheres for Light-Scattering
Influence of PCBM on the Glass Transition Temperature (Tg) of Poly(N-Vinylcarbazole)-Based Photorefractive Composite
The Effect of the Fe2+B/Fe3+B Ratio on Electric Conductivity and Corrosion Resistance of Anodes
The Influence of Hydrostatic Pressure and Electric Field to the Remanent Polarization of PbLa(Zr,Sn,Ti)O3 Ceramic
Effects of MoS2 on Tribological Properties and Mechanically Mixed Layer of Al Matrix Composites
Study of Alternating Current Impedance of Basic Magnesium Sulfate Cement
Study of Plasma Spraying Radar Absorbing Coating
Surface Micromorphology and Growth Rate Related to Supersaturation of KDP Crystals Grown at Different Temperature
First-Principle Calculation of Al2O3(012)/SiC(310) Interface Model
An Experimental Study for Low-Cycle Fatigue Crack Propagation of Glidcop Al-15
Preparation and Light Trapping Properties of Double-Layered ZnO:Al Films with Textured Surface
Chapter 3: Technologies in Chemical Engineering
Effect of Si/Al Ratios on the Structure and Catalytic Properties of Alkaline-Treated ZSM-5 Catalysts
Dynamics of Bed for Regeneration of Cerium Oxide High-Temperature Coal Gas Desulfurization Sorbent
The Effect of Regeneration Conditions on the Properties of CeO2 Desulfurization Sorbent in SO2 Atmosphere
The Properties of Iron Oxide Desulfurization Sorbents Regenerated under the Synergy of SO2-O2 Atmosphere
Synthesis and Application of Itaconic Acid Water-Coke Slurry Dispersant
Kinetics of Cavitation Bubble in Ultrasonic Degassing of Casting Aluminium Alloy
Microstructure and Mechanical Properties of Twinning M/A Islands in a X100 High Strength Pipeline Steel
Chapter 4: Metallurgical Technologies and Materials Processing
Microstructural Evolution after Cold Forming and Recrystallization Annealing in Commercially Pure Titanium Sheet
The Influence of the Substitution of Si by Al on the Properties of Hot Rolled C-Mn-Si TRIP Steel
Characterization of the Welded-Joint of High-Strength High-Toughness Seamless Steel Pipe under High-Cycle Fatigue Condition
Numerical Study on the Impact of Second Phase Content on the Solidification of Al-Pb Hypermonotectic Alloys
Materials for Modern Technologies III
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
