Chapter
Structural and Magnetic Behaviour of the Rapidly Quenched Nd-Fe-Si Alloys
Effect of Co and Cu Alloying on Nd-Fe-Al Based Bulk Amorphous Alloys
Glass Forming Ability in the Zr-Nb-Ni-Cu-Al Bulk Metallic Glasses
Effect of Additive Elements on the Glass Forming Ability and Crystallization of Zr-Ti-Cu-Ni Metallic Glasses
The Effect of Nitride Addition on the Thermal Stability of Mechanically Alloyed Amorphous Zr65Al7.5Cu17.5Ni10 Alloy
Bulk Amorphous Alloys: Preparation and Properties of (Mg0.98Al0.02)x(Cu0.75Y0.25)100-x
Thermal Stability and Viscosity of Mg-Based Glasses and Composites
Impurity Diffusion in ZrTiCuNiBe Bulk Metallic Glasses
Relation between Diffusion and Decomposition Kinetics in Zr41Ti14Cu12.5Ni10Be22.5 Bulk Glass
Pressure-Volume Relation of Zr-Ti-Cu-Ni-Be Bulk Metallic Glass
Crystallisation of Zr-Based Bulk Metallic Glasses during Fast Heating in a Synchrotron Beam
Atomic Force Microscopy Studies on Duplex Microstructures of Nanocrystalline-Amorphous in Zr-Based Metallic Glass
Crystallization of Zr41Ti14Cu12Ni10Be23 Melts
Crystallization Behavior and Stability of ZrTiCuNiBe Glasses
Comparison of the Decomposition and Crystallization Behavior of Zr and Pd Based Bulk Amorphous Alloys
Formation of Nanocrystals in Zr-Al-Cu-Ni Alloys
Enhanced Plasticity of Bulk Metallic Glasses Containing Ductile Phase Dendrite Dispersions
Low Temperature Ductile Shear Failure of Zr41.2Ti13.8Ni10Cu12.5Be22.5 and Cu50Zr35Ti8Hf5Ni2 Bulk Amorphous Alloys
Hydrogenation and Oxidation of Zr-Based Metallic Glasses, Quasicrystalline or Nanocrystalline Alloys
Corrosion Behaviour of Bulk Amorphous and Crystalline Zr55Al10Cu30Ni5 Alloys at Ambient and Elevated Temperature
Identification of Key Surface Processes for Vapor Deposited Amorphous Metallic Film Growth
Production of Thin Films of Metastable Materials by Cross-Beam Pulsed Laser Deposition
Structural Characterization of Laser Deposited Fe/Al Multilayers
Structural Phase Transformation Observed with In-Situ Mechanical Stress Measurement during the Growth of Amorphous Fe100-xZrx Films
Metastable Phase Formation in Fe-Al Thin Films Cocondensed by Cross-Beam Pulsed Laser Deposition
Grain Boundaries and Mechanical Properties of Nanocrystalline Diamond Films
Thermal Stability of Nanostructured Cr3C2-NiCr Coatings
Synthesis and Characterization of Cryomilled SiC Reinforced Al Coatings
Dispersion Strengthened Materials Obtained by Mechanical Alloying - An Overview
Non-Monotonic Decomposition in the Immiscible Ag-Cu System
Al-Ni Intermetallics Produced by Spontaneous Reaction during Milling
Formation of the Ordered Phases during Mechanical Alloying of 50Fe - 25Al - 25Si(at.%) Mixtures
Structural Investigations of the TiC-Fe(Al) Nanocomposite Formed by Mechanical Alloying
Formation of Ni-Al-Ti-C Nanocomposites by Mechanical Alloying
Thermal Behavior of Mechanically Alloyed Al3Nb Nanocrystalline Powders
Formation of Nanocrystalline FeAl-NbC and FeAl-VC Composites by Mechanical Alloying
Melting Point Depression and Microstructure in Ball-Milled Nanocrystalline Aluminium Powders
Mechanically Induced Disorder in Magnesium Ferrite
X-Ray Study of the Kinetics of Mechanical Alloying
Structural Investigation of a Mechanically Alloyed Nd40Fe60 Powder
Crystallisation of Melt-Spun Al-Fe-Nd-Cu Alloys
Primary Crystallization of Al-Based Metallic Glasses
Evaluation of the Volume Fraction Crystallised during Devitrification of Al-Based Amorphous Alloys
Nucleation Behavior of α-Fe in Amorphous Fe-7Zr-5B-1Au Alloy
The Influence of the Annealing Atmosphere on the Nanocrystallization Behaviour and on the Magnetic and Mechanical Properties of Amorphous FeZrBCu - Base Alloys
Synthesis of Metal-Oxide Nanoparticles by Mechanochemical Processing
Mechanosynthesis of a New Tin Sulphide Phase
Synthesis of Al2O3-TiC by Reactive Milling
Microstructure and Properties of Ti-TiN In-Situ Composites Prepared by Reactive Ball Milling of Ti in Ammonia Followed by Hot Pressing
Hydrogen Disproportionation by Reactive Milling and Recombination of Nd2Fe14B and Nd2Co14B Alloys
Mechanochemical Synthesis in Ti-C, Ti-B, B-C, B-C-Al Systems
Mechanochemical Preparation and Characterization of Nanocrystalline Ceramic Composites
The Combustive Reduction of 2-(2,4-Dichlorophenoxy) Propionic Acid by Mechanochemical Methods
Effect of Reaction Medium on the Mechanochemical Decomposition of ZrH2 and on the Reactivity of Hydride Hydrogen
Reduction of Iron-Oxide by Ball-Milling with Hydrogen Gas Flow
Change in the Short Range Order in the Al Transition Metal Hydroxides Mixed System by Mechanical Stressing
A Molecular Orbital Study on the Formation of Hetero-Metalloxane Bonds under Mechanical Stressing
Mechanochemical Synthesis of Niobium Hydrides
Innovative Processing of Nanostructured Films and Powders using Electrostatic Assisted Aerosol Based Deposition Methods
Nanopowder and Nanostructured Film Synthesis in Low Pressure Flames
Studies on Nanocrystalline Ni/Al2O3 Films Formed by Electrolytic DC Plating
Properties of Alumina-Zirconia Nanocomposites
Synthesis of Si Nanoparticles within Buried Layers of SiOx
Shift of the Absorption Spectra of Undoped and Rare Earth Doped Nanocrystalline Yttria Prepared by Chemical Vapour Synthesis
Low-Cost Nanopowders for Phosphor and Laser Applications by Flame Spray Pyrolysis
Flame Synthesis of Spherical Nanoparticles
Supersonic Cluster Beam Synthesis of Nanostructured Materials
Production of Fe-Cu Ultrafine Particles by Plasma Jet Method
Single Source Precursor-CVD for Nano-Scaled Ceramics and Cermets
On the Development of a Low Temperature, Superplastic Nanocrystalline 5 Mol.% Yttria Stabilised Zirconia: Synthesis, Processing and Mechanical Characterisation
Application of Pulsed Power and Microwave Techniques for the Production of Nanocrystalline Powders and Ceramic Bulk Materials
Hydrogenation-Disproportionation Reactions in Nd14.01Fe78.91Hf0.08B6.99
Hydrogen-Induced Amorphization of SmFe3
Synthesis of Nano-Structured Fe/Fe3O4 Complex Particle by Thermal Decomposition of Wüstite
Structural Study of Nano-Size Ceramic Particles Fabricated by Cavitation
Phase Instability of Nanocrystalline Driven Alloys
Thermodynamic Simulation of Mechanically Alloyed Solid Solution Formation in Fe-Sn System
Thermodynamic Description of the Phase Transformation Mechanism during Mechanical Alloying Process
The Formation Sequence of Intermediate Phases in Mechanical Alloying of Binary Systems
Computer Simulation of Mechanoactivation Process in the Planetary Ball Mill: Determination of the Energy Parameters of Milling
Diffusion Decomposition of Nanocrystalline Alloys at Generation of Non-Equilibrium Vacancies on Grain Boundaries
The Kinetics of Ball Milling Induced Amorphization in NiNb Intermetallic and Elemental Mixture of the same Composition
Hot-Forming of Silicide-Dispersion-Strengthened Titanium Aluminides (SDS-TiAl) with Grain Sizes in the Submicron Range
Thermal Stability and Densification of Nanostructured Titanium Carbide and Graphite/nTiC Composite
Characterization of NiAl Intermetallic Produced by Mechanical Alloying and Consolidated by Spark Plasma Sintering
Characterization of Cu-Co Alloys Produced by Mechanosynthesis and Spark Plasma Sintering
X-Ray Analysis of Nanostructural Materials Made by Reactive Ball Milling: The Effect of Wavelength on Signal to Background Ratio
Microstructural Characterisation of Amorphous and Nanocrystalline Structures Through Diffraction Methods
Inelastic Neutron Scattering Studies of Zr100–χAlχ Solid Solutions
Atomic Dynamics of Amorphous and Nanocrystalline Ni80P20
Radial Distribution Function of Amorphous Silicon Oxycarbide Compounds
In-Situ X-Ray Crystallite Growth Study on Nanocrystalline Fe
X-Ray Crystallographic Characterization of Nanocrystalline and Amorphous YNi2B2C Superconductors
X-Ray Powder Diffraction and Mössbauer Study of Red Mud Residue from Alumina Production
3-D Atom Probe Studies of Some Nanostructured Materials
Mechanically Alloyed Nanocrystalline Cu80Co20 Investigated by AP/FIM and 3DAP
Microstructural Characterisation of the Mechanically Alloyed Cu88Fe12 and Cu72Co28 Compounds and of the Ball Milled Cu80(Fe0.3Co0.7)20 Pseudo-Alloy
Mössbauer and SANS Study of Fe-Powder Mechanically Alloyed with Carbon
Structural Stability and High-Temperature Positron Lifetime Study of Mechanically Alloyed Nanocrystalline Pd-Zr
Structural and Thermal Studies of HfPd System Prepared by Mechanical Alloying
Local Structure of Amorphous and Metastable Alloys as seen by Mechanical Hydrogen Relaxation
The Effect of Absorbed Hydrogen on the Chemical Short-Range Order in Zr68Fe32 Metallic Glass
Deformation of Structural Superplastics, Nanostructured Materials and Metallic Glasses: A Unified Approach
The Behavior of Quasicrystal Reinforced Extruded Al Alloys under Tensile Loading at Room and Elevated Temperatures
Production and Characterization of Nanostructured Ti-Based Intermetallics
SPD Processing and Properties of Metastable Nanostructured Alloys
Development of Equilibrium Submicrocrystalline Structure in Superalloy MA754
Nanocrystalline Ball Milled fcc-FeRh Alloys
Ball Milled Amorphous (Fe0.5Cu0.5)85 Zr15 Alloys
Thermal Decomposition of Mechanically Alloyed (FexCu1-x)93Zr7 (x=0.5, 0.7) Solid Solutions
Structural and Magnetic Investigation of Mechanically Alloyed Fe-M-B (M=Nb, Zr, Hf) Powders
Correlation between the Microstructure and Enhanced Room Temperature Coercivity in Ball Milled Ferromagnetic - Antiferromagnetic Composites
Superparamagnetism and Giant Magnetoresistance in Partially Milled and Annealed Fe0.30Cr0.70
Magnetic Study of Nanocrystalline Fe67W33 Alloy
Thermomagnetic Investigation of the Ni-Pd-P Glasses
Effect of Annealing in Hydrogen on Composition, Structure and Magnetic Properties of Rapidly Quenched Fe-Co-Si-TM-B Ribbons
Influence of the Grain Size on the Magnetic Properties of Ball Milled Fe90W10
Magnetic Properties of Grain Boundaries and Precipitates in Nanocrystalline Ni and Ni-Cu Alloys
Electrochemical Characterization of Rapidly-Densified Ni-Mo Electrodes
Enhanced Corrosion Resistance of Amorphous and Nanocrystalline FeNbB Alloys
Scanning Kelvin Probe Investigations on Highly Distorted Metals
Investigation of Passive Layer Properties on Nanocrystalline Nickel by Electrochemical Impedance Spectroscopy
Electron Transport in Amorphous Al-Y-TM (TM=Cu, Ni, Co, Fe) Alloys
Metal Supported Catalysts Prepared by Mechanical Alloying Processes
Mechanically Induced Disordered VOHPO4 x 0.5 H2O Structure and its Behaviour in the Phase Transformation in the Presence of Ammonia
Influence of the Preparation Conditions of NiZr Rapidly Solidified Catalysts Precursors on the Structural Evolution during the Activation Treatment
High Energy Ball Milled Nanocrystalline ZnO Varistors
Production and Characterization of Mn-Si Thermoelectric Material
Variation of Superconductivity in Mechanically Alloyed Pseudo-Quaternary Y-Pt/Pd-B-C
Nanocrystalline Composites for Thermal Spray Applications
Product Engineering of Gas-Born Nano-Sized Particles
Gas Phase Synthesis of Size Selected SnO2 Nanoparticles for Gas Sensor Applications
Processing of Ceramic Powder using High Energy Milling
Gas Pressure and Temperature Measuring System (GTM) for In-Situ Data Acquisition during Planetary Ball Milling
Interfaces in Alumina-Zirconia Ceramics for Ball-Bearing Applications
Metastable, Mechanically Alloyed and Nanocrystalline Materials 1999
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
