Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).The present volume provides an up-to-date, comprehensive and worldwide state-of –the art insight into Powder Metallurgy, including: New theoretical aspects of Powder Metallurgy, Modelling and Simulation, Sintered Steels, PM Nonferrous Materials, PM Tool Materials, PM Lightweight and Porous Materials, PM Functional Materials, Powder Manufacturing and Pressing, Sintering Process, Metal Injection Moulding, Full Density and Alternative Consolidation Processes, Secondary and Finishing Operations.
Seven invited papers are accompanied by 62 contributed papers on new theoretical aspects and products in powder metallurgy, advanced materials with special properties, characterizing powders and powder metallurgy products, and new developments in powder production. Among specific topics are wear characteristics of vacuum sintered steels, mechanical and tribological characteristics of sintered manganese steels, elaborating titanium-nickel alloys with special properties through mechanical milling, preparing and characterizing magnetic submicron powder, and the behavior of some unalloyed and alloyed sintered steels at static and dynamic loads.
Chapter
Gigacycle Fatigue Response of PM versus Ingot Metallurgy Tool Steels
Improvement of Mechanical Properties of Fe-Cr-Mo-[Cu-Ni]-C Sintered Sintered Steels by Sinter Hardening
Production of Ceramics Reinforced Al Foams by Powder Metallurgy Techniques
The Beginnings of Romanian Research in the Field of Powder Metallurgy
II. New Theoretical Aspects and Products in Powder Metallurgy
Effect of Manganese Addition and Sintering Conditions on Mechanical Properties of Low Carbon 3Cr Prealloyed Steels
Mechanical and Tribological Characteristics of Sintered Manganese Steels
The Influence of Cu-Coating versus Admixing on Mechanical Properties and Dimensional Change of Sintered Fe-Cu Parts
Formation of the Hipernik Alloy by Mechanical Alloying
Observation about Obtaining Maximum Compactness Products via Compact Packing
The Improving of the Process of the Iron, the Cast Iron and the Copper Powder Mixing
Modeling of Droplet Dynamic and Thermal Behavior during Gas Atomization Process
Physical Properties of Bonded Nanocomposite Type Hard-Soft Magnets
III. Advanced Materials with Special Properties
Wear Resistant In Situ MMC Sintered with FeBC Liquid Phase
Shape Memory NiTi Alloys Obtained by Powder Metallurgy Route
Inductive Sensor with Sintered Magnetic Core to Evaluate the Performances of the Table Tennis Players
CdS Powders Obtained by Chemical Bath Deposition
Research Regarding the Influence of the Compaction Pressure of the Iron Powder on the Processes that Take Place when Elaborating Steels Obtained through the Carburizing – Sintering Proceeding
An Electrochemical Machining Device for Residual Stresses Measurement in PM Parts by Layer Removal Method
Elaboration of Titanium-Nickel Alloy with Special Properties through Mechanical Milling
Research on the Intermetallic Compounds Formation in a Ni-Ti Alloy Obtained through Powder Metallurgy Specific Methods
Milling Effects on Hybrid Collagen / Inorganic Phase Composites
FeNi-TiC Composite Powders Obtained by Electrolytic Co-Deposition
Preliminary Studies and Researches on the Elaboration of Gradual Porous Sintered Structures by Powder Sedimentation
Metallic Foams Obtained from Nickel Based Superalloy Hollow Spheres
Nickel Ferrite Powder Obtained by High Energy Reactive Ball Milling
Zinc Ferrite Powder Synthesized by High Energy Reactive Ball Milling
Ni3Fe Mechanically Alloyed: “Shock Mode” versus “Friction Mode”
Synthesis of the Mümetal Magnetic Powders by Mechanical Alloying
Research about Obtaining Porous Sintered Multilayer Materials from Stainless Steel Powders
Stainless Steels Sintered Form the Mixture of Prealloyed Stainless Steel and Alloying Element Powders
Obtaining of the Ir-Al Nanocrystalline Powders by Mechanical Alloying
SHS Processing of NiTi-Nb Smart Alloys
Mechanical, Thermal and Electrical Properties of Acrilonitril Butadiene Styrene (ABS) Composites Filled with Bronze Powder
Mechano-Synthesis of Nanocrystalline FeTi-Al-Ni Intermetallic Alloy for Hydrogen Storage
The Influence of Processing Parameters on the Magnetic Properties of the Nanocrystalline Soft Magnetic Composites Based on Ni3Fe
Thermal, Mechanical and Electrical Properties of High Density Polyethylene Composites Reinforced with Copper Powder
The Thermomechanical Modeling for Shape Memory Alloys
IV. Characterization of Powders and Powder Metallurgy Products
Chemical Reactions during Sintering of Mn and Mn-Cr Prealloyed Steels in Inert versus Reducing Atmospheres
Material Data for Modelling Density Distributions in Green Parts
Powder Metallurgy Processing of Al/TiAl3+Al2O3
Influence of the Mechanical Alloying Parameters on the Elaboration of Sic/Al Nanocomposite Powders
Studies Concerning the Microhardness of Sintered Carbon Steels Obtained from Fe and Fe3C Nanopowders
NdFeB/αFe Nanocomposite Permanent Magnets with Enhanced Properties Prepared by Spark Plasma Sintering
Preliminary Studies Regarding the Behaviour of New Titanium Implants
Research on the Way of Obtaining the Parts of Sintered Powders by Injection Moulding
Influence of the Reinforcing Elements on the Wear Behavior of Al/(Sic+Graphite) Composites Elaborated by Spark Plasma Sintering Technology
New Composite Materials, Obtained from Ashes Wastes, with Potential Applications for Electromagnetic Shielding
Physical and Quantitative Microstructural Analysis of Sintered Al-Cu/SiCp Composites
Modification of the Structural Characteristics of the Tungsten Powder through Short Mechanical Milling Processes
Research on the Elaboration by Sintering in Steps of Carbon Steels Based on Iron and Pure Synthetic Cementite Nanopowders Obtained by Mechanical Alloy
A Study on the Effect of Manufacturing Conditions on Surface Roughness during Machining of Cu/Al2O3 Composites
The Effect of Time of Powder Removal on Powder Particle Size and Shape Copper Powder Produced by Electrolysis Method
Influences of the Elaboration Conditions and Addition of Ni and Co on the Some Properties of the W-Cu Electrical Contacts
Magnetic Submicron Powder Preparation and Characterization
V. New Developments in Powder Production
Comparison between Microwave and Microwave Plasma Sintering of Nickel Powders
Effect of Different Vacuum Heat Treatments on the Microstructure of a Low Alloyed Sintered Steel
Effect of Foaming Agent on the Structure and Morphology of Al and Alumix 231 Foams Produced by Powder Metallurgy
PM Titanium – Based Composites with Improved Biocompatibility
Liquid Phase Sintering of Fe-Cu-Sn-Pb System
Research on the Manufacture of some Tungsten-Copper Composite after Vacuum Sintering
Behaviour of Some Unalloyed and Alloyed Sintered Steels at Static and Dynamic Loads
Evaluation of Surface Integrity during Machining with Different Tool Grades of Sicp/Al-Si Composites Produced by Powder Metallurgy
Researches Regarding the Barium W Ferrite Pyrosynthesis by Microwave Heating
High Resistance Porous Pieces Obtained by PM, Reinforced with Metallic Yarns
Analysis of Functional Properties of Cu-Al2O3 Particulate Reinforced Composites. A First Assessment: Elaboration
Researches in Powder Metallurgy
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
