Chapter
Distribution of Dislocations in Nanostructured Bainite
Understanding of the Bainite Transformation in a Nano-Structured Bainitic Steel
Beta Titanium Alloys with Very High Ductility Induced by Complex Deformation Mechanisms: a New Material Perspective for Coronary Stent Applications
Precursor Nanoscale Textures: from Tweed to Glassy Behaviour
Acoustic Emission Avalanches in Martensitic Transitions: New Perspectives for the Problem of Source Location
Position of Incommensurate Satellites Appearing in Ti-Ni Based Shape Memory Alloys
Effects of Transformation Temperature on Variant Grouping of Bainitic Ferrite in Low Carbon Steel
Elastic and Dielectric Measurements of the Structural Transformations in the Ferroelectric Perovskite (Na1/2Bi1/2)1-XBaXTiO3
Promoting Isothermal Martensite Formation by High Temperature Heat Treatments in a Precipitation Hardening Austenitic Stainless Steel
Influence of Temperature on Phase Transformation and Deformation Mechanisms of Cast CrMnNi-TRIP/TWIP Steel
Neutron Diffraction Study of a CuAlBe Shape Memory Alloy
The Use of Barkhausen Noise to Study the Martensitic Phase Transformation
Effects of Cooling Rate and Sn Addition on the Microstructure of Ti-Nb-Sn Alloys
Microstructural Control of the Austenite Stability in Low-Alloyed TRIP Steels
Structural Transitions in a Co2NiGa Ferromagnetic Shape Memory Alloy
Microstructure of Cu-Zn-Al Shape Memory Alloys Joined by Electric Stored-Energy Welding
Acceleration of Bainitic Transformation in Nanostructured, Low Temperature Bainitic Steels by Using of Thermodynamic Model
Martensite Fraction Determination Using Cooling Curve Analysis
CHAPTER 2: Diffusional Transformations
Advanced TEM and SEM Methods Applied to 3D Nano- and Microstructural Investigations of Ni4Ti3 Precipitates in Ni-Ti (SMA)
Substitution Effect of the Third Element X on the Morphology of A1/L12/D022 Three-Phase Microstructure in Ni-V-X (X=Si, Al) Alloy
Edge-to-Edge Matching at Ti-TiH Interfaces: Kinetics of Hydride Growth and Clustering of Precipitates with Different Orientation Relationships
Zêta Hydride Precipitation in Zirconium Alloys: an Example of Elastically Driven Morphology of Coherent Trigonal Precipitates inside a Сlose-Packed Hexagonal Matrix
The Interface between γ and γ’ in Ni-Al Alloys by HREM
An Energetic Study on the Preference of the Habit Plane in Fcc/bcc System
Precipitation Sequences in Two Al-Li-Cu Alloys
Exchange Coupling Nanophase Fe-Pd Ferromagnets Through Solid State Transformation
The Role of Dispersions in Modeling the Kinetics of Phase Transformations
First-Principles and Genetic Modelling of Precipitation Sequences in Aluminium Alloys
Atomic Scale Investigation of Cr Precipitation in Cu and Related Mechanical Properties.
Effect of Mn on the Nanoprecipitation in Binary Fe-Cu alloys
Modelisation of Precipitation in Concentrated Alloys
Analysis of Clustering Characteristics during early Stages of Cu Precipitation in bcc-Fe
The β'-α' Interaction: a Study of early Stages of Phase Separation in a Fe-20%Cr-6%Al-0.5%Ti Alloy
Beyond the Cahn-Hilliard Equation: a Vacancy-Based Kinetic Theory
Thermal Embrittlement of a Lean Grade of Duplex Stainless Steel: Alloy 2003
Study by Differential Thermal Analysis of Reverse Spinodal Transformation in 15-5 PH Alloy.
Tweed and Nanoscale Cubic / Tetragonal Phase Mixtures in Decomposing Alloys: the Pseudospinodal Concept
Duplex Stainless Steel Microstructural Developments as Model Microstructures for Hot Ductility Investigations
Electron Microscopy Study of Hypostoichiometric Fe-Pd Nanocomposites Resulting from Combined Reactions Thermomechanical Processing
Influence of High Magnetic Field on Ferrite Transformation in Fe-C Base Alloys
Ferrite Formation Above the Ae3 in a Medium-Carbon Steel
Influence of Crystallography on Nucleation of Ferrite Precipitates at Austenite Grain Boundary Corners in a Co-15Fe Alloy
Phase Transformation Near Dislocations and Cracks
Precipitation of Co in Supersaturated Au-Based Au-Co Alloys; Microstructural Evolution and Transformation Kinetics
β → β + α Isothermal Phase Transformation in Ti17 Titanium Alloy: Chemical Composition and Crystallographic Aspect
Phase Transformations in the NiS Nickel Sulphide: Microstructure, Mechanisms and Modelling through In Situ Microscopy.
Influence of Alloying Elements on Precipitation Behavior of VCN in Middle Carbon Steels
M3C and M7C3 Carbide Precipitation in Modified H11 Tool Steel
Interphase Boundary Precipitation of VC Accompanying Ferrite and Pearlite Transformation in Medium Carbon Steels
Influence of Chromium Carbide Size on the Austenitization Kinetics of a Martensitic Stainless Steel Measured by Dilatometry
Precipitation Process in a Cu-Ni-Be Alloy
Precipitation in Aged N-Containing Steels
Spinodal Decomposition in Fe-Cr Alloys
Cluster Dynamics Study of Neutron Irradiation Induced Defects in Fe-12.5at%Cr Alloy
Pinning of Austenite Grain Boundaries by Mixed AlN and Nb(C,N) Precipitates
Phase Transformations in Lutetium Borides at Heating in Vacuum
Reactive Diffusion between Ti and Cu-9.3Sn-0.3Ti Alloy at Solid-State Temperatures
The Microstructure and Mechanical Properties of the Ni-Al-V Alloys Prepared by Levitation and Crystallization in Copper Mould
Evolution of Twin-Related Variants of α Phase in a Ti-V-Cu Alloy
Thermodynamic Prediction of Zr-Nb-O-H Phase Diagram Sections
Characterization of Precipitation Sequences in Superaustenitic Stainless Steels
The Effect of NbC Precipitates and Nb in Solid-Solution on the Phase Transformation Kinetics in High-Purity Fe-C-Mn-Nb Alloys
Influence of Copper Additions in Fe-10Ni (mass %) Alloys on Cooling Microstructures
Microstructural Evolution of AISI D2 Tool Steel during Aging
Laves Phase Formation in the Fe20Co18W Alloy Annealed at 800°C
CHAPTER 3: Transition by Interface Migration
Ferrite Formation from Austenite; Effects of Length and Time Scales, Interface Type and Chemistry
Kinetic Transitions during Non-Partitioned Ferrite Growth in Fe-C-Mn Alloys
On the Effect of Bulk Diffusion on the Initiation of the Discontinuous Precipitation Reaction: Phase-Field Simulations
Kinetics of Lamellar Decomposition Reactions in U-Nb Alloys
A Mixed-Mode Model Considering Soft Impingement Effects for Solid-State Partitioning Phase Transformations
Model for the Annealing of Partial Martensite-Austenite Microstructures in Steels
Microstructures of Cu-Alloyed Ductile Cast Iron Treated by Two-Step Austempering
Sequential Phase Formation during Reactive Diffusion of a Nanometric-Thick Mn Film on Ge(111)
Thermal Stability of Athermal and Deformation Martensite in Ni27Ti2AlMoNb Steel
CHAPTER 4: Order and Disorder Transitions
Order and Disorder in Ni-Pt Single Crystals
Mesoscopic TDGL Model for Formation of Domain Structures in D019 Type Ordering
Re-Examination of A1 → L10 Ordering: Generalized Bragg-Williams Model with Elastic Relaxation
Effect of Magnetism on Short-Range Order Formation in Fe-Si and Fe-Al Alloys
Evidence of a Biphasic Domain in the UO2-Nd2O3 Diagram at Room Temperature: a Proof for a Miscibility Gap in UO2-Nd2O3 Phase Diagram ?
CHAPTER 5: Phase Transitions and Size Effect
Theoretical and Experimental Evidences of Sequential Phase Formation during Sub-Nanometric-Thick Film Reactive Diffusion
Kinetic of Formation of Ni and Pd Silicides: Determination of Interfacial Mobility and Interdiffusion Coefficient by In Situ Techniques
A Model for Formation and Consumption of Transient Phase
Simulation of the β→α(O) Phase Transformation due to Oxygen Diffusion during High Temperature Oxidation of Zirconium Alloys
Superficial Phase Transitions in Nanoalloys
Multiscale Modelling of the Ageing Kinetics of a 2D Deposit
Non-Equilibrium Properties of Au-Pd Nanoparticles
Equilibrium Distribution of Alloyed Nanowires
Transmission Electron Microscopy Study of Microstructural Evolution in Nanograined Ni-Ti Microwires Heat Treated by Electric Pulse
CHAPTER 6: Driven Systems and Phase Transformations
Kinetics and Formation Mechanisms of a Nanostructured Fe-Y2O3 Powder Prepared by Reactive Ball Milling
Evolution of Ar Implanted Amorphous Silicon Dioxide under High Voltage Electron Beam
Disordering and Ordering in a Severely Deformed FePd Alloy
Stress Induced Phase Transformations in TRIP-Steel / Mg-PSZ Composites
Precipitation in Solution-Treated Al-4wt%Cu under Cyclic Strain
Microstructure Evolution of Mechanically Alloyed ODS Ferritic Steels during Hot Extrusion
Fullerene-Metal Composites: Phase Transformations During Milling and Sintering
CHAPTER 7: Phase Transformations during Industrial Processing
Interaction Deformation / Precipitation / Phase Transformation in Nb Micro-Alloyed Steels
Effect of Thermomechanical Processing on the Microstructure and Retained Austenite Stability during In Situ Tensile Testing Using Synchrotron X-Ray Diffraction of NbMoAl TRIP Steel
Transformation Kinetics and Resulting Microstructure in MMC Reinforced with TiC Particles
Oxygen, Hydrogen and Main Alloying Chemical Elements Partitioning Upon Alpha←→Beta Phase Transformation in Zirconium Alloys
Precipitation in a near Beta Titanium Alloy on Ageing: Influence of Heating Rate and Chemical Composition of the Beta-Metastable Phase
Modelling the in-Service Microstructural Evolution of Ni-Based Superalloys for Power Generation
Effect of the Metallurgical State of Austenite on the Microtexture Properties of the Bainitic Transformation in a Low Alloy Steel
Modeling High Strain Rate Viscoplastic Deformations Combined with Phase Changes
Phase Transformations in the Al-Si Coating during the Austenitization Step
From Nanocomposite Aerogels to Glass Ceramics for Nuclear Wastes Containment
Influence of the Austempering Temperature on the Microstructure and Crystallography of a Carbide-Free Bainitic Steel
Study of the Origin of the Unexpected Pearlite during the Cooling Stage of Two Cast High-Speed Steels
Non-Isothermal Austenite Grain Growth Kinetics in the HAZ of a Microalloyed X-80 Linepipe Steel
Modelling of the Non-Isothermal Austenite Formation Kinetics of a X10CrMoVNb9-1 Martensitic Steel
Effect of Partial Martensite Transformation on Bainite Reaction Kinetics in Different 1%C Steels
Dynamics of the Quenching and Partitioning (Q&P) Process
Precipitation Sequence and Kinetics in an Fe-Si-Ti Alloy
A Study of Dual Phase Steel Damage Evolution with Microstructure
Tempering Kinetics of the X10CrMoVNb9-1Martensitic Steel
Magnetic Force Microscopic Description of the Structure of Glow Discharge Nitrided Layers Produced on Ni27Ti2AlMoNb Steel
Modelling Age Hardening CuCr1Zr Electrode Alloy Softening during Resistance Spot Welding
Microstructure Evolution and Mechanical Properties of the Ni/Ni Soldered Joints
Precipitation Kinetics Study of Al – Zr – X(Sc or Ti) Alloys by Phase Field Simulations and Atom Probe Tomography
Effects of Two-Step Tempering Treatment on the Microstructural Formation of T91 Ferritic Steels
Finite Element Simulation and Optimisation of Ageing Precipitation in Nickel Base Superalloys with a Low Gamma-Prime (g’) Volume Fraction
Decarburization of 0.21C-1.3Mn-0.2Si Steel for Hot Stamping at Various Heating Temperatures
Mathematical Modelling of NbC Particle Nucleation and Growth in an HSLA Steel under Elastic Deformation
Thermodynamic Analysis of the Effect of Compositional Inhomogeneity on Phase Transformations in a 13Cr6Ni2Mo Supermartensitic Stainless Steel
The Structure and the Evolution of Titanate Nanobelts, Used as Seeds for the Nucleation of Hydroxyapatite at the Surface of Titanium Implants
Restitution of the Shapes and Orientations of the Prior Austenitic Grains from Inherited Alpha' Orientation Maps in Steels
Phase Transformations on Friction Welding of Dissimilar Thermochemically Treated Steels
Direct Spheroidization of High Carbon Steels: Effect of Thermomechanical Processing
CHAPTER 8: Amorphous Alloys, Quasicrystals and other Complex Phases
Group Theory Considerations in Quasicrystal to Crystal Transformations
Quasicrystalline Phase Transformation in the Quaternary and Ternary Systems AlCuMnFe and AlPdMn
Hydrogen-Storage Properties of Nanocrystalline Mg-Based Materials Created through Controlled Devitrification of a Metallic Glass
Phase Transformations in Amorphous Bilayer Ribbons
Nucleation and Growth of Triangular Prismatic Iron Carbides in Amorphous Films by In Situ Transmission Electron Microscopy
The Role of Applied Strain on Crystallisation Kinetics of an Amorphous Zr-Based Bulk Metallic Glass
CHAPTER 9: Advances in Theory and Modeling of Phase Transitions
Thermodynamics of Stable and Metastable Cu-O-H Compounds
Dependence of Vacancy-Solute Interactions on Magnetic State in Dilute Iron-Based Alloys
Effect of Doping on the Thermoelectric Properties of Thallium Tellurides Using First Principles Calculations
Ab Initio Calculations of Kinetic Properties in ZrC and TiC Carbides
Ordering in Highly Supersaturated Alpha-Fe-C
Magnetic Cluster Expansion Study of Chromium Precipitates in Fe-Cr Alloys
Surface Segregation Maps Derived from Tight-Binding Ising Model
Simulations of Decomposition Kinetics of Fe-Cr Solid Solutions during Thermal Aging
Saddle Point Energies from Ab Initio Jump Profiles in MC Simulation of Order Kinetics in Intermetallics.
Modelling of Reaction of Metallic Nanospheres with Gas
Magic Numbers for Bimetallic Clusters
Modeling of β→α Transformation in Complex Titanium Alloys
Phase Field Modelling of Austenite Formation in Low Carbon Steels
Investigation of Spinodal Decomposition in Fe-Cr Alloys: CALPHAD Modeling and Phase Field Simulation
3D Phase Field Modeling of Martensitic Microstructure Evolution in Steels
Phase-Field Modelling of Spinodal Decomposition during Ageing and Heating
Spin Models for Ferroelastics: towards a Spin Glass Description of Strain Glass
Phase-field Model for Diffusional Phase Transformations in Elastically Inhomogeneous Polycrystals
Helical Domain Patterns in Tube Configurations: Effect of Geometry Length Scales
Description of Crystallographic Morphologies of Product Phases with Singularity and Δg Distribution
Unjamming in Dry Granular Matter: Second-Order Phase Transition between Fragile Solid and Dry Fluid (Bearing) by Intermittency.
Simulating Three-Dimensional Phase Coarsening at Ultrahigh Volume Fractions by Phase-Field Method
Theoretical Investigation of Alloy Phase Equilibria by Continuous Displacement Cluster Variation Method
Simulation of the Kinetics of Grain-Boundary Nucleated Phase Transformations
Lengthening Kinetics of Pro-Eutectoid Ferrite Ledge in Fe-C Alloy under Interface-Diffusion Mixed Control Mode
3D Cellular Automata Modelling of Solid–state Transformations Relevant in Low–alloy Steel Production
Stochastic Statistical Theory of Precipitation in Metastable Alloys with Application to Fe-Cu and Fe-Cu-Mn Alloy Systems
Diffusion under a Stress in Metals and Interstitial Alloys
Thermodynamic Aspects of Liquid Phase Sintering B-Containing P/M Stainless Steels
Thermodynamic Modelling of Carbide Precipitation in Hot Work Tool Steels with Different Silicon Contents
Modeling of Growth and Dissolution of Grain Boundary Cementite in Vacuum Carburizing Process
Critical Assessment of Bainite Models for Advanced High Strength Steels
A Simple Model of Dissipative Processes in Ferroelastics
Modeling of Growth and Formation of Pearlite Colonies for Simple Models of Alloys Iron-Carbon
Analytical Modeling of Austenite Growth and Phase Evolution during Reverse Transformation from Pearlite in High Carbon Steels
Kinetics of the Austenite-Ferrite Transformation with and without Applied Stress
A Convex Hull Algorithm for Minimization of Gibbs Energy in Two-Phase Multicomponent Alloys
An Equation of State of Amorphous β-Boron under High Pressure.
Simulation of Atomic Structure and Diffusion Characteristics of Point Defects in BCC and FCC Metals
Micromechanical Modelling of Microtexture Formation in Low Alloy Steel Bainite
Atomic Density Function Simulations of Crystal Growth Kinetics of FCC Crystal and BCC-FCC Transition
CHAPTER 10: Advances in Experimental Techniques
In Situ Synchrotron X-Ray Diffraction Investigation of the Fast Recovery of Microstructure during Electropulse Treatment of Heavily Cold Drawn Nanocrystalline Ni-Ti Wires
Application of Advanced Experimental Techniques for the Microstructural Characterization of Nanobainitic Steels
In Situ Analysis of Effects of Transformation Strain on the Austenite Phase during Martenistic Transformation of Cr-Ni Steel
In Situ Study of Microstructural Development during Phase Transformation in Welding Process
Microstructure Characteristics of the Reaction Product Region Formed due to the High Temperature Contact of Molten Aluminium and ZnO Single Crystal
Structural Characterization of Reaction Product Region in Al/MgO and Al/MgAl2O4 Systems
Plastic Flow Localization Viewed as an Auto-Wave Process Generated in Deforming Metals
FIB/SEM Applied to Quantitative 3D Analysis of Precipitates in Ni-Ti
Full Characterization of a Tool Steel Texture and Microstructure by Using Fast Simultaneous EBSD/EDS Measurements
Influence of Doping on the Structural Transformations of the Proton Conducting Perovskite BaCe1xYxO3-D
Neutron Diffraction Study on Magnetic Structure in Layered Manganite La2-2xSr1+2xMn2O7 (x=0.307)
Heteroepitaxy Crystallography in Low Dimensional Nanostructures
Phase-Field Simulation of D03-Type Antiphase Boundary Migration in Fe3Al with Vacancy and Solute Segregation
Solid-Solid Phase Transformations in Inorganic Materials
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
