Chapter
Lightweight Concrete with Different Content of PP Fibers Exposed to High Temperature
Performance of Dosage of Ceramic Chopped Fibers in Aluminous Cement-Based Composites after Exposure to High Temperatures
Resistance of Surface Layers of Concrete against Aggressive Environment
Residual Mechanical Properties of Hybrid Fiber Reinforced HPC Exposed to High Temperatures
The Issue of Underground Depositing of High Radioactive Waste
Durability of Two Types of HPC at Sulphate Solution Environment
Assessment of Concrete Quality of Load-Bearing Structure of the Bridge across Otava River No. 121-006 near Zvikov after Fifty Years of Operation in Severe Environmental Conditions
Chapter 2: Additives and Admixtures
MgO Influence on the Fundamental Characteristics of Corundum Refractory Castables
The Crystalline Admixture Effect on Concrete and Cement Mortar Compressive Strength
Early Stage Microstructure Development of Cement Paste Modified by Crystalline Admixture
Grindability of CFBC Fly Ash and High Temperature Fly Ash
The Speed of the Crystalline Admixture’s Waterproofing Effect in Concrete
Synergistic Effect of High Temperature Fly Ash with Fluidized Bed Combustion Fly Ash in Cement Composites
Chapter 3: Advanced Binder Systems
Research of the Interaction of Mechanically Activated Fillers Based on Silica and Cement Paste
Monitoring of Kinetics of Pozzolanic Reaction
Chemical Properties and Reactivity of CFBC Fly Ash
Impact of Milling Intensifiers on Specific Surface Area of Cement
Influence of Use Fluidized Fly Ash Combined with High Temperature Fly Ash on Microstructure of Cement Composite
Long-Term Development of Strength of Cement Paste with Fly Ash
Nanosilica Activated High Volume Fly Ash Concrete: Effects on Selected Properties
Belit Cement Based on Concrete Recyclate
The Use of FBC Fly Ash in the Preparation of Portland Cement Clinker
Preliminary Study on Design of Biological Shielding Concrete - Selection of Binder
Chapter 4: Sustainable Concrete and Composites
High-Volume Municipal Solid Waste Incineration Bottom Ash Concrete
Influence of Mix Proportions on Water Absorption of RCA Concretes
Effect of Microfillers on Selected Destructive and Nondestructive Mechanical Properties of Cement Mortars: Different Types of Recycled Materials
Carbonation Resistance of Fine Aggregate Concrete with Partial Replacement of Cement
Probabilistic Modelling of Strength of Concretes with RCA
Dispersed Reinforcement Based on Natural Fibres Used in Cement Composites
Influence of Waste Crushed Limestone and Waste Micronized Marble Powder on Mechanical Properties of Cement Composite
The Carbonation Depth of Fine Recycled Aggregate Concrete
Chapter 5: Experimental Methods and Measurement
Application of Non-Destructive Methods for the Determination of Microstructural Parameters of Recycled Asphalt Concrete in Track Bed
Experimental Analysis of Strengthening of Dapped-End Beams
Evaluation of Crack Formation in Concrete and Basalt Specimens under Cyclic Uniaxial Load Using Acoustic Emission and Computed X-Ray Tomography
Relationship between Compressive Strength and Young's Modulus of Cement Paste with Recycled Concrete Powder
Ultrasonic Pulse Method - Influence of Internal Compressive Stress on Results of Testing Calcium Silicate Bricks
Laser-Ultrasonic Testing of the Structure and Properties of Concrete and Carbon Fiber-Reinforced Plastics
Chapter 6: High Performance Concrete
Experimental and Numerical Analysis of Tensile Properties of Textile Reinforced Concrete with Steel Fibres
Controlled Hardening of Silicate Binders for the Optimization of High Performance Composites
Comparison of Different Types of Glass Reinforcement for HPC Facade Elements from Mechanical and Economical Aspects
Options of UHPC in the Czech Republic
Preparation of High-Performance Concrete for Adjusting of Possibility of its Usage in Building Practice
Bond Characteristics of TRC Slabs Cured in Autoclave
Dosage of Metakaolin in High Performance Concrete
Effect of Placement Method on Projectile Impact Resistance of UHPFRC
Chapter 7: Other Special Concrete and Building Composites
An Additively Manufactured Modular Metamaterial Composed of a Single Cell
Foam Concrete Gravity Wedges as a Thermal Insulation of Flat Roofs
Gypsum Mortars with Different Types of Aggregates: Design and Properties
Influence of the Aggregate Type on the Properties of Dolomitic Lime-Based Mortars
Mechanical Properties of Cement Composites Reinforced by Carbon Microfibers: Compressive and Bending Strength
The Comparison of Water, Water Vapour Transport Properties and Mechanical Characterization of Two Commercial Plasters on Market in the Czech Republic
Special Concrete and Composites 2016
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
