Chapter
Synthesis and Characterization of Cu and Ni Bearing Nano-Composites and Nano-Structured Alloys
Through Thickness Microstructural Investigation of Temper Rolled Ferritic Steels for Thin Sheet Applications
Microstructural Evolution during Spheroidization Annealing of Eutectoid Steel: Effect of Interlamellar Spacing and Cold Working
Analysis of the Homogeneity of Particle Refinement in Friction Stir Processing Al-Si Alloys
Stress Relaxation in Sandwiched Si3N4/Al/Si3N4 Thin Films
Mechanical Behaviors of Nanoimprinted Cu-Ni Alloys Using Molecular Dynamics Simulation
Corrosion Behavior of a New Developed Ferritic Stainless Steels Used in Automobile Exhaust System
In Situ Synthesis and Wear Resistance of Titanium Matrix Composites
Mn-Series Low Carbon Air Cooling Bainitic Steels Containg Niobium
Fluidized Bed Plasmas Reactor for Catalyst Synthesis and Pretreatment. Application for Pollution Abatement in Stationary and Mobile Sources
Texture Evolution in Linear Friction Welded Ti-6Al-4V
Investigations on the Mechanical Behavior of Advanced High Strength Steels Resistance Spot Welds in Cross Tension and Tensile Shear
Barriers of Oxidation ans Ageing of Space Shuttle Material
The Evolution of Transversal Surface Defects in the Axisymmetric Drawing of Copper Bars
An Enriched 2D Multi-Scale Model Based on a Cosserat Continuum for the Analysis of Regular Masonry
Kinetics of Recrystallization and Grain Growth of Cold Rolled TWIP Steel
Fracture Toughness of High-Performance Concrete on Three-Point Bending Notched Beams at Elevated Temperature
Experimental Study of Mandibular and Malar Distraction Osteogenesis Using Deos Device
High Pressure Torsion of Pure Ti: Effect of Pressure and Strain on Allotropy
Optimization of the Chemical Composition and Homogenization Treatment of AA7020 Aluminum Alloy
Elaboration of Sol-Gel Coatings from Aerogels and Xerogels of Doped Zirconia for TBC Applications
Nucleation with Collapse of Acoustic Cavitation in Molten Al-Si Alloys
Plasma Surface Modification of 316L Stainless Steel for Cardiovascular Stent Coating
Surface Microstructure and Texture Evolution during Interrupted Annealing in Ultra Low Carbon Steels
Synthesis and Characterization of Ti2AlC and Ti2AlN MAX Phase Coatings Manufactured in an Industrial-Size Coater
Effect of Strain Paths on Formability Evaluation of TRIP Steels
Exact Solutions for Powder Plastic Materials
Effect of Rolling Speed on Deformability and Microstructure in Rolling of AZ31B Magnesium Alloy
Isothermal Aging Behavior in Ti-10 Cr-Al Alloys for Medical Applications
Fem Calculations and Experimental Determination of Residual Stresses in Alumina/Nickel Alloy Joints. Optimization of Fabrication Parameters
An Assessment of Bulk and Local Stored Energy Measurements in Ultrafine Grained Interstitial Free Steel
Microstructure Refinement of As-Cast Single Crystal Superalloys by Re-Solidification
On Residual Stresses Development during Nitriding of Steel: Thermochemical and Time Dependence
Numerical Modelling of the Compression Behaviour of Single-Crystalline MAX-Phase Materials
Numerical and Experimental Study of Residual Stresses in a Linear Friction Welded Al-SiCp Composite
Predicting the Effect of Compressive and Tensile Residual Stresses in Fracture Mechanics Specimens
Density Gradient Materials by Direct Metal Laser Sintering
The Effect of Ultrasonic Injection on the Microstructure and Mechanical Properties of A356 Alloy
Effect of Heat Treatment on Mechanical Properties of Super Duplex Stainless Steel
Microstructure Evolution in a 3%Co Modified P911 Heat Resistant Steel under Creep Conditions
Effect of Cold Deformation upon Ageing of Superaustenitic Stainless Steels
Phase Constitution and Mechanical Property of Ti-Cr and Ti-Cr-Sn Alloys Containing 3D Transition Metal Elements
Effect of Delta Phase on the Hot Deformation Behaviour and Microstructural Evolution of Inconel 718
Numerical Simulation of Residual Thermal Stresses in AA7050 Alloy during DC-Casting Using ALSIM5
The Effects of Hot Isostatic Pressing Conditions on the Microstructure of Beta-Gamma Titanium Aluminide Powder Alloys
Evolution of Surface Morphology in Ni(γ)/Ni3Al(γ´) Two-Phase Foil during Electrochemical Etching
The Optimization of Calciothermic Reduction-Diffusion Process for Preparation of High-Performance Sm2Fe17Nx Magnetic Powder
Structure of CaO-SrO-TiO2-P2O5 Glasses and their Ion-Releasing Abilities in Tris Buffer Solution
Quench Sensitivity and its Effect on the Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Aluminum Alloy
Evaluation of the Work-Hardening of Brass Sheets Following Strain Path Changes
Quantitative Analysis of Variant Selection and Orientation Relationships during the γ-to-α Phase Transformation in Hot-Rolled TRIP Steels
Crack-Healing Effectiveness of Nano Ni + SiC Co-Dispersed Alumina Hybrid Materials
Unusual Microstructural Development upon Gaseous Nitriding of Fe-4.65at% Al Alloy
Changes in Microstructure of Biomedical Co-Cr-Mo-C Alloys with Solution Treating and Aging
Application of Image Plate to X-Ray Stress Measurement of Surface Thin Layer
Effect of Intense Plastic Straining and Subsequent Heat Treatment on Mechanical Properties of an Al-Li-Mg-Sc-Zr Alloy
Multiple Precipitation Behavior of Niobium Carbide and Copper in Martensitic Steel
Bending Fatigue and Spring Back Properties of Implant Rods Made of β-Type Titanium Alloy for Spinal Fixture
Design of Titanium Alloys Showing Plasticity Induced Transformation
Iron Oxide Nanoparticles: Novel Drug Delivery Materials for Treating Bone Diseases
Effect of Weld Tip Geometry on Ultrasonic Welding between Steel and Aluminum Alloy
Analysis of Residual Stress-Texture Relationships in Thin Films
Indirect Template Method of Magnetic Field Assisted Assembly
High-Strain-Rate Shear Testing Applied to Ti-6Al-4V
Prediction of Mechanical Properties of Ti-6Al-4V Using Neural Network
3D Observation and Image-Based Finite Element Analyses of Fatigue Crack Propagation in an Al-Mg-Si Alloy
Long-Term Corrosion Resistance of Biomedical Grade Stainless Steel ISO 5832-1 ("316LVM") under External Anodic Electrical Pulsing Conditions
A Study on Similar and Dissimilar Linear Friction Welds of 2024 Al Alloy and 2124Al/SiCP Composite
An Investigation into Cracking in Nickel-Base Superalloy Repair Welds
Crack Tip Dislocations Observed by Combining Scanning Transmission Electron Microscopy and Computed Tomography
Deposition of Functional Polymer Thin Films Using Atmospheric Pressure Plasma for Biomedical Applications – Endothelialization of Vascular Prostheses
Anelastic Phenomena and Cr2N Precipitation in a High Nitrogen Austenitic Steel
Recrystallization and Grain Growth Behavior of SPD Deformed 316L Stainless Steel
Drug Loaded, Biodegradable Nerve Conduits for the Simultaneous Chemical and Electrical Stimulation of Neural Cells as a Therapeutic Approach for Peripheral Nerve Regeneration
In Situ X-Ray Diffraction Investigations during Diffusion Anneals of Ni-Cu Thin Film Diffusion Couples
Physical Based Microstructure Modelling Coupled with Nucleation Theory during and after Hot Forming of AA5083
Measurement of Micro Residual Stresses Near the Grain Boundary in Copper Bicrystal
Influence of Second-Phase Particles on Microstructure Evolution and Mechanical Behavior of Ultrafine Grained Al-Alloys Produced by Severe Plastic Deformation
Finding the Optimum Cutting Conditions for Face Milling 13% Manganese Steel Using the Taguchi Design Method and Predictive Equations
Nucleation at Cube Bands during Recrystallisation in Commercial Al Alloy
Effect of Substrate Constraint on Stress-Induced Deformation Mechanism of Tungsten Thin Film
Residual Stress Evaluation of Railway Wheels by X-Ray Diffraction and Finite Element Method
Synchrotron µCT Investigation of the Collapsing Pore-Network of Gelatin Scaffolds under Compression
Microstructural Study of Copper and Copper/Alumina Composite Coatings Produced by Cold Spray Process
Crystallization Behavior and Thermal Stability of Two-Glassy Phase ZR-Based Bulk Metallic Glasses
Effects of Combined Zr and Mn Additions on Dispersoid Formation and Recrystallisation Behaviour of AA2198 Sheet
Phase Equilibrium of the AuMn-Cu2MnGa System
Influence of Manganese on the Hot Working Behaviour of Construction Steels
Direct Fabrication of a Ti-47Al-2Cr-2Nb Alloy by Selective Laser Melting and Direct Metal Deposition Processes
FEM Modelling of Recrystallization Behaviour for Near-Alpha Ti Alloy IMI834
Development of a Plasma Process for Microfluidic Devices in the Prospect of Cell Attachment
Existence of Local Network Structure in Binary Amorphous Metals and its Contribution to Elastic Properties
Evolution of Residual Stress in Cu-Line Patterns with Different Linewidth
Material Constitutive Behaviour and Microstructure Study on Aluminium Alloys for Friction Stir Welding
Effects of Elastic Behaviour of Dies and Servo Press Machine on Deep Drawing Process
Ultrasonic Welding Mild Steel Sheet to Al-Mg Alloy Sheet
Magnetostrictive Properties of Epoxy-Bonded Tb0,3Dy0,7Fe1,9 Composites
Cold Spray Characteristics of Commercially Pure Ti and Ti-6Al-4V
Catalytic Activity of Oxidation-Reduction Pre-Treated Ni3Al for Methane Steam Reforming
Crystallographic Texture of Induction-Welded and Heat-Treated Pipeline Steel
Dynamic Growth of Ultra-Fine Austenite Grains Deformed above Ad3 Temperature in a Nb-V-Ti Steel
The Nano Carbide Control: Design of Super Ferrite in Steels
A TEP Study on the Microstructural Development in AA2024 during Interrupted Ageing
Surface Repair of Tool Made of 12 Ni Maraging Steel by Laser Cladding of NiCoMo Powder
Coupled Numerical Simulation of Process in Rheocasting-Rolling for Semi-Solid Magnesium Alloy Used By Slope
Tomographic and Topographic Investigation of Poly-D,L-Lactide-Co-Glycolide Microspheres Loaded with Prostaglandine E2 for Extended Drug Release Applications
Mechanical Properties of Csf/AZ91D Composites Fabricated by Extrusion Forming Process Directly Following the Vacuum Infiltration
Using the Plunging and Welding Process Windows to Determine a FSW Means of Production
Stress Analysis on the Stretch Forming of the Aluminum Saddle-Shaped Skins
Stress Corrosion Cracking Behaviour of Welded Duplex Stainless Steel
Microstructural Characterization of Ti6Al4V-SiCf Composite Produced by New Roll-Bonding Process
Effect of Austenite Deformation on Recrystallisation Behaviour in an X-70 Microalloyed Steel
Water-Resistant Poly(Vinyl Alcohol) Hybrid Nanofibers Incorporating Polyhedral Oligosilsesquioxane (POSS)
Grain Boundary Modification by Si3N4 Additions and the Effect on Corrosion Behaviors in Two Sintered Nd-Fe-B Magnets
Microstructure and Thermal Diffusivity of Gd2Zr2O7 Powders
The Effects of Friction and Lubrication on Multipass Hot Deformation
Local Mechanical Characterization of Human Teeth by Instrumented Indentation
TEM Study and Magnetic Measurements of Nano–Scale Particles Formed in Cu–Base Alloys
Hydrogen Embrittlement of Submicrocrystalline Ultra-Low Carbon Steel Produced by High-Pressure Torsion Straining
Effect of Thermomechanical Processing on Structure and Corrosion-Mechanical Properties of AISI 321 Steel
THERMEC 2009 Supplement
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
