Description
The 36 peer-reviewed papers cover mainly topics on X-ray and related research.Volume is indexed by Thomson Reuters CPCI-S (WoS)
Selected and peer-reviewed from a June 2010 international conference on Langkawi Island, Malaysia, 36 papers survey how x-ray and similar imaging technologies are being used in research and industry. The topics include analyzing the mineralogical component of palm oil fuel ash with or without unburned carbon, the effect of different gloss firing temperature on the crystallization of zinc-based crystal glaze, forming a titanium carbide reinforced copper matrix composite by an process, synthetic hydrotalcite prepared from a modified combustion method using glucose as fuel, the formation and mechanistic study of self-ordering zirconium oxide nanotubes by anodic oxidation, and the characterization and phase evolution of cordierite based glass synthesis from pure oxide and minerals.
Chapter
Effect of Al2O3/ZrO2 Hybrid on the Fracture Toughness and Flexural Properties of PMMA Denture Base
Effect of Fractional Precipitation on Quality of Nanostructured Alumina Produced from Black Aluminium Dross Waste
Effect of Particle Sizes of Magnesium Oxide on Zirconia Toughened Alumina Vickers Hardness
Development of a Simultaneous Elemental Analysis for Clay Minerals Using EDXRF
Structural Properties Studies of GaN on 6H-SiC by Means of X-Ray Diffraction Technique
Effects of Different Gloss Firing Temperature on the Crystallization of Zinc-Based Crystal Glaze
Hydrogenolysis of Glycerol to Propanediols over Nano-Ru/C Catalyst with Ionic Liquid Addition
Characterization of Porous Anodic Aluminium Oxide Film on Aluminium Templates Formed in Anodizing Process
Effects of Calcination Temperature on the Phase Formation and Microstructure of Barium Zinc Tantalate
Phase Analysis of Mechanically Alloyed In Situ Copper-Tungsten Carbide Composite
Application of Small-Angle X-Ray Scattering to Predict Microfibril Angle in Acacia mangium Wood
X-Ray Powder Diffraction Study on the MgB2 Superconductor Reacted with Nano-SiC: The Effects of Sintering Temperature
Heating Rate Effects on Properties of Powder Metallurgy Fe-Cr-Al2O3 Composites
Growth of Cu-Zn5 and Cu5Zn8 Intermetallic Compounds in the Sn-9Zn/Cu Joint during Liquid State Aging
Effect of La2O3 Additions on Microstructure, Morphology and Pressure Sensing Behaviour of PZT Based Ceramics Sintered in Al2O3 Environment
The Effect of Water Content on the Formation of TiO2 Nanotubes in Ethylene Glycol
Characterization of Co-Cr-Mo (F-75) Alloy Produced by Solid State Sintering
Formation of Titanium Carbide Reinforced Copper Matrix Composite by In Situ Processing
Formation of TiC-Reinforced Iron Based Composite through Carbothermal Reduction of Hematite and Anatase
Stabilization of Magnetite Nano Iron Oxide with a Series of Novel Surfactants
Characterization of Fluoro-Doped Tin Oxide Films Prepared by Newly Approached of Inkjet Printing Methods
Effect of Ruthenium Metal Precursors Supported on Bentonite in Hydrogenolysis Glycerol
New Silica Supported HClO4 as Efficient Catalysts for Estolide Synthesis from Oleic Acid
Synthetic Hydrotalcite Prepared from Modified Combustion Method Using Glucose as Fuel
Effects of the Polyvinyl Alcohol (PVA) on the Synthesis of Alumina Fibers through Electrospinning Technique
Selective Oxidation of Glycerol over Titania Supported AuPd Bimetallic Catalysts
Crystallite Size of Chitosan Capped Zinc Sulfide Nanoparticles Synthesized via Wet Chemical Route
La-Doped CaCu3Ti4O12 Ceramics Sintered in Argon Environment
Formation and Mechanistic Study of Self-Ordering ZrO2 Nanotubes by Anodic Oxidation
Calcium Oxide as Potential Catalyst for Gasification of Palm Oil Empty Fruit Bunch to Produce Syngas
Effect of pH on TiO2 Nanoparticles via Sol-Gel Method
Rietveld Quantitative Phase Analysis of Non-Stoichiometric Cordierite Synthesised from Mainly Talc and Kaolin: Effect of Sintering Temperature
Characterization and Phase Evolution of Cordierite Based Glass Synthesis from Pure Oxide and Minerals
X-ray and Related Techniques
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
