Chapter
Structure Formation during Liquid-Phase Sintering of the Diamond-Containing Composites with Sn-Cu-Co-W Binders
Technological Processes for Obtaining Monolithic Polydisperse Protein-Base Systems
The Dependence of Gibbs Energy of Formation of Niobium Mononitride on its Composition and Temperature in the Range of 1773-2023 K
The Development of Multi-Directional Spatially Reinforced Material Structural Theory
The Effect of Soft Interlayers on the Behavior of a Four-Layer Titanium-Steel Composite at High Temperatures
The Influence of Milling Regimes in Beater Mill on Particle Size Distribution and Structural Characteristics of Strontium Hexaferrite Powder
The Influence of Structure-Forming Factors on the Properties of Polymer Composite Material under Static Loading
The Structure, Phase Composition and Rheological Properties of Powders Obtained by Chemical Dispersion of Al Alloys with Mo, V and Zr
Theoretical Description of Electrophysical Properties of Syntactic Carbon Foams
Functional Characteristics of QD-InAs/GaAs Heterostructures with Potential Barriers AlGaAs and GaAs
Growing of AlInGaAsP Solid Solutions on InP Substrates for Photovoltaic Converters
Lead Germanate Pb5Ge3O11 Crystal Growth
Low-Energy Ion Technique for Semiconductor Surface Preparation
Chapter 2: Steels and Alloys, Metallurgical and Metalworking Technologies
A Study of the Structure and Properties of Austenitic Metastable Steels under Strain
A Study of the Structure and Regularities of Formation of the Compounds during Explosive Welding of Steel-Aluminum Composite
About Raising of the Gas Vortex Stabilization Efficiency in Plasma Torch for Metal Cutting
About the Possibility of Increase in CGI Properties by Austempering
About Turning the Surface of a Part Formed by a Combination of Dissimilar Structural Materials with Break Elements
Adaptation of the Methodology of Designing Cylindrical Milling Processes to the Profile Milling Processes
Combined Methods of Laser Processing of Steel
Comparative Evaluation of Analytical Methods for the Determination of Coefficients of Friction and Stresses when Wire Rod Drawing
Crystallographic Peculiarities of Shear α-γ Transformation in Austenitic Stainless Steel in the High Temperature Area
Determination of Beta-Transus Temperature of Two-Phase Titanium Alloys Using Differential Scanning Calorimetry
Development and Research of the Method of Severe Alternating Deformation in the Process of Rolling of Thick Steel Sheets and Plates Made of Non-Ferrous Alloys
Features of the Structure Formation at Laser and Laser-Arc Deposition from Aluminum Wire
Free-Cutting Cr–Ni–Mo Steel
Geometrical Errors of Surfaces Milled with Convex and Concave Profile Tools
Heat Treatment Regimes Influence on Mechanical Properties of Forging Products of α+β- and Pseudo- β-Titanium Alloys
Influence of Different Factors on Withdrawal Speed of Continuous Cast Billet
Influence of Electrode Gap’s Value in Electron Gun on the Penetrating Ability of Electron Beam during the Implementation of Additive Processes
Influence of Technological Parameters of Direct Laser Deposition Process on the Structure and Properties of Deposited Products from Alloy Ti-6Al-4V
Influence of the Roughness on the Mechanical Properties of Ti-6Al-4V Products Prepared by Direct Laser Deposition Technology
Influence of the State of the Contact Surfaces on the Formation of the Joint of Steel and Brass during Cold Cladding
Research of the Mechanism of Destruction of Compression Molds for Casting under Pressure of Color Alloys
Investigation of Grey Cast Iron Microstructure Influence on its Heat Resistance
Methodology of High-Carbon Wire Rod Perlite Grain Grade Identification
Laser Welded Joints of High-Nitrogen Austenitic Steels: Microstructure and Properties
Microstructure and Mechanical Properties of High Strength Alloyed Steel for Aerospace Application
Morphology and Chemical Composition of Silicon Carbide Surfaces Interacting with Iron, Cobalt, and Nickel in Microscratching
The Effect of the Operating Speed and Wheel Characteristics on the Surface Quality at Creep-Feed Grinding Titanium Alloys
Ni-Fe Alloys as Perspective Materials for Highly Efficient Magnetostatic Shielding
Numeric Loading Simulation of Titanium Implant Manufactured Using 3D Printing
Properties of Austenite in Maraging Steel
Relaxation Processes in Ti-Al Composite Material after Rolling
The Investigation of Microhardness of Grey Cast Iron Dendritic Structure
Research Regarding Heat Treatment Influence on Properties of Chromic Steel 40H GOST 4543-71(DIN 41Cr4, Gb 40Cr, ASTM 5140) with Quenching in Polymer Solution with Purpose of Matching Tubing Pipes which Used in Oil and Gas Extraction
Shape Indexes for Dieless Forming of the Elongated Forgings with Sharpened End by Tensile Drawing with Rupture
Method for Determining the Optimum Counter-Flexing Force of Working Rolls during Sheet Rolling
Statistical Analysis Method of the Grain Structure of Nanostructured Single Phase Metal Materials Processed by High-Pressure Torsion
Statistical Analysis of Histograms of Grain Size Distribution in Nanostructured Materials Processed by Severe Plastic Deformation
Strain State during Rolling of Aluminum Samples
Strength of a Threaded Joint on Cut in Holes with Flanges Formed by a Rotating Punch in Thin-Sheet Work-Pieces
Structure Formation in High-Nitrogen Steel during Heat Treatment
Structurization and Properties of Magnetoplastics Made of Mechanically Activated Amorphous-Crystalline Powder Alloys Based on the Nd-Fe-B System
Study of Interstitial Impurities Influence on Properties of Titanium Alloy Ti-5Al-5V-5Mo-3Cr-1Zr
Synthesis of Aluminum-Matrix Alloys with Al-Zr-W by Metallothermy of Oxides
The Effect of Annealing on Mechanical Properties, the Number of Fluidity, and the Size of Coherent Scattering Regions in AMg1, AMg5, and AMg6 Alloys
Effect of Manganese and Magnesium Content and Conditions of Annealing on Mechanical Properties and Cracking Formation during Bending of Aluminum Alloy AA3005
The Possibility of Obtaining Electrical Steel with Texture {100} <001>
Thermal Cycles and Peculiar Properties of Austenite Decomposition when Laser-Hybrid Welding Steel of K60 Strength Class
Thermal Processes Simulation during Processing Bevel Gears
The Influence of Heat Treatment on the Size of the Carbide Inclusions and Hardness of Multilayer Composite Material ZD-0803
Thermomechanical Hardening of Steels
To the Influence of the Deformation Speed on Hardening Process during the Cold Sheet Forming
To the Question of Evaluation of the Anode Voltage Drop
Using of Smoothed Particle Hydrodynamics Method for Constructing a Mathematical Model of Electron-Beam Surfacing Process
HN45VMTYUBR Alloy: Impact of Laser Beam Welding Modes on Microstructure and Distribution of Alloying Elements in the Seam
Zero “Background” Line for Iron Alloys Samples Dilatographs Decoding
A Study of the Influence of the Manufacturing Process Parameters on the Distribution of Residual Stresses in Pipe Walls during Sink Drawing
FEM Simulation of Copper Busbar Pressing on the Continuous Extrusion Line "CONFORM"
The Investigation of the Influence of Friction and Roll Calibration on the Pipe Formation during Plug Rolling
The Investigation of Pipe Ends Formation under Reduction Mill Rolling
Computerized Study of Intense Deformed State of Grinding Plate of High-Manganese Steel
Constructing Isotherms of Oxygen Solubility in the Liquid Metal of the Cu-Na-K-O System
Thermodynamic Assessment of the Na-Cu and Na-K Binary Systems
Development of the Algorithm for Determination of Mechanical Properties of Steel 20 with Different Levels of Cumulative Fatigue Damage with the Application of Compact Samples
Impact of High-Frequency Vibrations on Metal Items Resistance to Cyclic and Axial Loads
Effect of Superheat Melt Treatment on Microstructure and Mechanical Properties of Aluminum Alloys Produced by Lost Foam Casting
Examination of Hardening Curves Definition Methods in Torsion Test
Hot-Rolled Texture of FCC and BCC Metals
Induction Heating Technology for Steel Wire Processing
Influence of Heat Treatment on Microstructure and Mechanical Properties of Selective Laser Melted TiAl6V4 Alloy
Influence of Nitrogen and Nitride-Forming Elements on Properties of Boron-Treated Steel
Interaction of Phosphorus with Impurity Atoms in BCC Iron
Structure and Stability of Intermediate (Fe, Cr)7C3 Carbides
Prediction of Temperature Fields in the System “Casting and a Damp Sandy-Argillaceous Mold”
Production of Al-Si Alloys by the Direct Silicon Reduction from the Amorphous Microsilica
Rheological Properties and Substantiation of Hot Rolling Regimes of Low- and Medium Carbon Structural Steels
Rolled Metal Structure Resource Saving Preparation for Long-Length Hardened Bolt Upsetting
Selective Laser Melting of AlSi12 Powder
Statistical Analysis of Metal Particles Forming during Reduction of Oxides with Low Iron Content
Strength of SHS Aluminium Cast Iron from Dispersed Mechanical Engineering Waste
Studying the Peculiarities of Steel Grinding Balls Structuring
The Influence of the Hardening Curve Profile on the Drawing Force of a Bar
The Study of the Characteristics of Metallic Powders after Electroerosion Dispersion
Chapter 3: Chemical and Hydrometallurgical Technologies
Adsorption Activity of Thermally Modified Shell Hazelnut in Relation to Ions Ni2+
Asphaltenes as Nano Objects Regulating Macrostructure of Solid High-Carbon Substances
Carbon Nanotubes Microenvironment in Ionic Surfactant Water Solutions
Designing a Technology of Industrial Sewage Waters Purification from the Spent Polishing Powder Based on Ceric Oxide
Effect of Lime and Organic Binders on Clay Gold-Bearing Ores Filterability
Thermal Capacity of Enriched Fuel Briquets Produced from the Fine of Ekibastuz Coal
Influence of Zinc Sulfide Wetting in Surfactants Presence on Leaching Parameters
Investigation of Fuel Briquettes Properties Using Wastes of Mineral Wool Production
Isolation of Strontium in Antimonates
Magnetic Petroleum Sorbent Based on Waste Kieselghur Sludge from Oil Extraction Industry for Removing Petroleum Products from Water Surface
The Development of a Purification Method of Sewage from Chromium (VI) by Iron-Containing Waste
Methods and Materials of Nanotechnologies for Improving the Boiler Fuel Properties
Microcrystalline Cellulose Based on Cellulose Containing Raw Material Modified by Steam Explosion Treatment
Physical and Chemical Properties of Activated Lignocellulose and its Areas of Application
Nickel Extraction from Poor Solutions by Sorption on Modified Coke
Evaluation of the Processing Opportunity of Galvanic Production Sludges with Nickel Recovery
Optimization of Wastewater Treatment from Cd2+ Ions Using Slag of Electric Furnace Steelmaking Production
Simple Universal Kelvin Equation Valid in the Critical Point Vicinity, External-Internal State Correction, and their Application to Nitrogen Capillary Condensation in Mesoporous Silica SBA-15
Technology of Producing of Sodium Hypochlorite from the Concentrate of Reverse Osmosis Systems
The Purification of Electroplating Industry Effluents with Agricultural Waste
Alternative Technology of Nickel-Cadmium Batteries Recycling
Application of Ecologically Clean Technology to Drying of Iron-Ore Pellets
Development of the Metallurgical Waste Recovery Process
Efficient Assessment of Physico-Chemical Properties of the Cryolite Melts for Research on the Improvement of Low-Temperature Aluminum Electrolysis
Extraction of Metals from Wastes of Metallurgical Production
Gold Electroextraction Fundamentals Using Zinc Three-Dimensional Cathode
Novel Method for Comprehensive Processing of Low-Grade Copper Concentrate
Investigation of Complex Treatment of the Gold-Bearing Antimony Flotation Concentrate
Synthesis of Fe(III)-Based Inorganic Sorbent and its Application for Arsenic Sorption
To the Problem of Reducing the Amount of Harmful Emissions when Refining Silver
Chapter 4: Building Materials
A Mechanism of Action of a Polyfunctional Modifier Made of Hydrocarbons Production Waste in Mineral Suspensions Based on Fine-Ground Cements
A Study on Structure and Phase Composition of Cellular Ceramic Materials from Dispersed Silica-Rich Rocks
About a Possibility of Usage of Sugar Beet Industrial Carbonate-Containing Byproducts in Dry Construction Mixtures and Oil Paints Manufacturing
Applications of Calcium Hydrosilicates and Amorphous Aluminosilicates in Lime Dry Mixes
Building Ceramics Based on Carbonate-Containing Raw Materials
Building Ecomaterials Based on Secondary Raw Material
Coefficients for Calculation of Deformation-Strength Characteristic of Concrete for Injection with Two-Stage Expansion
Complex Organomineral Additives with Hardening Accelerator
Creep and Long-Time Strength of Compression Elements from Foam Concrete
Determination of the Geometric Parameters of Round Logs as Functional Materials for Wooden Housing Construction
Effective and Ecological Technologies of Application of Structured Materials for Roadbed in the Permafrost Regions
Efficient Autoclaved Silicate Concretes with the Use of Steelmaking Slag
E-Modulus and Creep Coefficient of Self-Compacting Concretes and Concretes with some Mineral Additives
Geo-Composite Materials with Preset Properties and their Application in Hydraulic Engineering Construction
Heat Treatment of Wood in Liquids
Composite Railroad Ties Obtained by the Energy Efficient Recycle of Wooden Railroad Ties
Thermal Insulation Properties of Wood Polymeric Sand Composite
The Study of Soundproofing Properties of Wood Polymer-Sand Composite
Technological Features of the Production of Embossed Plywood
Highly-Dispersed Wollastonite-Based Additive and its Effect on Fine Concrete Strength
Influence of the Accuracy of Determining the Inner Diameter of Pressure Polyethylene Pipes by the Amount of Head Loss by Length
The Choice of Chemical Composition and Raw Materials for the Production of Basalt Wool with the Defined Characteristics
Method for Parameter Determination of Ceramic Products Compression Using the Mounting for Curves Readout
Methodological Approaches in Assessing the Possibility of Using Waste Electrocorundum Materials in Concrete Compositions
Nano Modified Foam-Fiber-Concrete Mixture
New Concrete for Protection from Radiation in the Urals Based on Natural Fillers
New Technology of White Portland Cement Production in the Ural Federal District
Optimization of Fine-Grained Concrete Composition in Order to Improve the Quality of Units’ Front Surface
The Formation of Composite Curing Systems Based on Technogenic Raw Materials
Portland Cement with Mineral Fillers and Polymer Additives
Problems of Autoclaved Aerated Concrete Treatment
Producing Improved Masonry and Protective Paints by Means of Modifying and Introducing Additives in Liquid Glass
Research of Thermophysical Properties of the Ultrathin Liquid Heat-Insulation
The Processing of Citrogypsum for Obtaining Modified Gypsum Binders and Composite Materials on their Basis
The Research of the Influence of Ferruginous Aggregates’ Surface and Polyfunctional Modifiers on Interfacial Phenomena and Strength Formation of the Contact Area in Concretes
The Through-Dyed Autoclaved Silicate Concretes with the Use of Thermally Activated Iron Ore Raw Materials Refinement Tailings
X-Ray Phase Analysis of High-Aluminate Cements under Conditions of early Compression
Development of Sulfur and Silicon Dioxide Activation Method in the Sulfur Concrete Technology
Slag Technogenic Formations as a Material for the Production of Silicate Products and Pig Iron
Chapter 5: Surface Engineering and Coatings
Anticorrosion Protection of Welded Joints of Oil Pipelines
Defects of Porous Self-Structured Anodic Alumina Oxide on Industrial Aluminum Grades
Elaboration and Investigation of Metallic Coating with Inclusion of Potassium Polytitanate
Increase of Wear Resistance and Contact-Fatigue Strength of Wheel Steel by Plasma Hardening
Investigation into the Effects of High Temperature on Mechanical Properties of Thermal Spray Coatings Applied by Plasma Spraying
Increasing the Abrasive Wear Resistance of High-Chromium Steel after Cold Treatment
The Use of Metastable Austenite to Increase the Wear Resistance of Steels of the Pearlite Class
Engineering Method for Analysis of the Ability to Strain-Hardening of Steels
Influence of the Parameters of Galvanomechanical Chromium Plating on the Coating Quality and Process Productivity
Effect of Abrasive Tools in Galvanomechanical Treatment on the Roughness of the Deposited Chromium Layer
Investigation of the Influence of the Form Factor of Finely Dispersed Carbon Components on the Hydrophobicity of the Surface
Investigation of the Influence of Various Kinds of Hardening on the Surface Structure EI893
Ion-Plasma Sprayed Coating as a Protective Decorative Coating for Copper-Nickel Alloy
Layered Ni-Cr-Al Coatings for Air Tuyeres Protection from the Burnout
Method for Synthesis of Retro-Reflective Coatings with Specified Optical Properties
Using the Simplex Design Technique for Optimization of Modes of Burnishing with Ball Tools
Modeling of the Structure of Heat-Insulating Semi-Transparent Materials and Coatings for Industrial and Transport Power Plants
New Technology of Hardening of Chromium-Nickel Steel Parts
New Decisions in Manufacturing Techniques of the Cemented Parts of Cars
Numerical Solution of the Differential Diffusion Equation for a Steel Carburizing Process
Structure and Thermophysical Properties of Coatings Formed by the Method of Microarc Oxidation on an Aluminum Alloy AK4-1
Investigation of Protective Coatings for Carbon Fibers by the Sol-Gel Method
Study on Surface Layers of Aluminum and Titanium Alloys and Analysis of their Scuff Resistance
Tin Powders Electrodeposition from Choline Chloride Based Ionic Liquid
Using VPr11-40N Brazing Powder as a Wear-Resistant Cladding for GTE Blade Airfoils
Varying of Oil Consumption of Fluid-Film Bearing’s Surface Layer by Means of Application of Anti-Friction Coatings
Laser-Spark Modification of the Surfaces of Structural Materials by the Example of St3
Accelerated Forming on the Sol-Silicate Binder in Precision Casting
Accelerated Tests of Protective Properties of Packaging Materials for Cold-Rolled Steel
Application of Gas-Thermal Coatings on Low-Alloyed Steel Surfaces
Features of Steel Tape Deformation-Strength Properties Formation by Plasma-Cavitating Treatment
Gas Corrosion of Pyrolysis Furnace Coils
Investigation of the Hydrogen Stratification of the Metal of the Active Gas Pipeline
Methods for Determining the Quality of Galvanic Chromium Coating
Modeling Calculation of the Corrosion Rate of Low Carbon Steel in Heat and Power Systems
Chapter 6: Processing and Controlling Technologies
Efficiency Analysis of the Friction Material for the Wind Turbine Braking System
Experimental Study of the Effectiveness of the Vibromechanical Stabilization of Bearing Rings
Improving Methods of Assessment of a Stress State of Structures According to the Results of Coercive Measurements
Optimal Shape Selection of Heat Exchangers Surfaces during Convective Heat Transfer
Photometric Method of Diagnosis of Bearing Units Operating with Hydrocarbon Mixtures
Qualimetry Rating of Hot-Rolled Pipes
The Analysis of the Work of Materials of Mouthguard Designs during Biomechanical Deformation
The Method and Device for Automated Material Elastic and Proportionality Limits Calculation
The Study of Ultrasonic Relaxation of Residual Stresses of Metal Plates Using Computer Simulation
Video Control Application for Increasing of Materials Spectral Analysis Accuracy
Automated Screwdown Mechanism of DUO-130 Rolling Mill
Experimental Research of Thermo-Hydraulic Separators and Dispatchers in Heat Supply Systems
On Modernization of Air Supply Systems for Improvement of Gas Distribution in Shaft Furnaces
Resource-Saving System of Heat and Cold Supply in Power Complex of the Metallurgical Plant
Materials Engineering and Technologies for Production and Processing IV
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
