Publisher： Trans Tech Publications
E-ISSN： 1662-9752|2014|803|355-361
ISSN： 0255-5476
Source： Materials Science Forum, Vol.2014, Iss.803, 2015-01, pp. : 355-361
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The present study has been performed to see the effect of varying Si/Al ratio (1.85 to 3) by using same concentration of NaOH and same solid/water ratio for the development of mechanical properties at 28 days of room temperature and also select the Si/Al ratio for coating application. The performance of the geopolymer was investigated on the basis of compressive strengthSEM along with EDS. Pure sodium hydroxide specimens displayed decreased strength. However the combination of sodium hydroxide and sodium silicate specimen with aSi/Al ratio of 2 showed maximum strength, whereas the specimen after Si/Al ratio 2 showed decrease in strength.
Related content
Effect of Solid/Liquid Ratio during Curing Time Fly Ash Based Geopolymer on Mechanical Property
Materials Science Forum, Vol. 2014, Iss. 803, 2015-01 ,pp. :
Access to resources
Recommend
Mechanical Properties of MIRHA-Fly Ash Geopolymer Concrete
Materials Science Forum, Vol. 2014, Iss. 803, 2015-01 ,pp. :
Mechanical Properties of Volcanic Ash Based Geopolymer Concrete
Materials Science Forum, Vol. 2016, Iss. 857, 2016-06 ,pp. :
The Effect of Pb2+ and Cd2+ Addition to Mechanical Properties of Fly Ash Geopolymer Paste
Materials Science Forum, Vol. 2016, Iss. 841, 2016-02 ,pp. :
Comparison of Using NaOH and KOH Activated Fly Ash-Based Geopolymer on the Mechanical Properties
Materials Science Forum, Vol. 2014, Iss. 803, 2015-01 ,pp. :