Hot-rolled strip re-reddening temperature changing law for late ultra fast-cooling in a CSP line

Author： Jiang Lian-yun Yuan Guo Shi Jian-hui Xue Yue Wu Di Wang Guo-dong

E-ISSN： 2271-3654|112|3|305-305

ISSN： 2271-3646

Source： Metallurgical Research & Technology (formerly Revue de Métallurgie), Vol.112, Iss.3, 2015-05, pp. : 305-305

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Higher cooling capacity is required after laminar cooling in order to develop dual-phase (DP) steel, and late ultra-fast cooling (UFC) equipment that was installed between the laminar cooling equipment and down coiler in a CSP line was developed. The strip temperature distribution along the thickness will affect the uniformity of the microstructure and properties, so in-depth research on the temperature distribution changing law during the ultra-fast cooling process should be conducted. The strip temperature was obtained by the numerical calculation method. By comparison some conclusions were obtained: the UFC re-reddening temperature decreases with an increase in the ultra-fast cooling rate and they present a quadratic relationship. The maximum temperature deviation between the center and surface, surface and boundary layer and center and boundary layer can be increased with an increase in the ultra-fast cooling rate, and they present a quadratic relationship. The finishing delivery temperature (FDT) and medium temperature (MT) do not affect the UFC re-reddening temperature obviously when the ultra-fast cooling rate is constant. There is a boundary layer along the thickness. The position of the boundary layer will remain in 1/4 strip thickness and the ultra-fast cooling rate, FDT, MT and strip thickness do not affect it. These results will provide a referenced role for the establishment of the ultra-fast cooling process.