Chapter
Material Stabilization (Training) and Characterization
Composite Design, Fabrication, and Testing
Experimental Composite Performance
Simulated Composite Performance
Not-captured Experimental Features
CHARACTERIZATION OF THE INTERFACE OF CO-EXTRUDED ASYMMETRIC ALUMINUM-TITANIUM COMPOSITE PROFILES
Subsequent heat treatment
FABRICATION AND CHARACTERIZATION OF NIOBIUM-ALUMINUM COMPOSITES: EFFECT OF SINTERING TEMPERATURE
2. Experimental Procedure
2.1 Manufacture of samples
2.2 Sampling Testing and Results
SPARK PLASMA SINTERING (SPS) OF CARBON NANOTUBE (CNT) / GRAPHENE NANOPLATELET (GNP)-NICKEL NANOCOMPOSITES: STRUCTURE PROPERTY ANALYSIS
3. Results and Discussion
3.1 Carbon Nanotube (CNT) /Nickel Nanocomposites
3.2 Graphene Nanoplatelet (GNP)/Nickel Nanocomposites
EFFECT OF IN-SITU TITANIUM BORIDE PARTICLE ADDITION AND FRICTION STIR PROCESSING ON WEAR BEHAVIOR OF ALUMINUM ALLOY 2219
2. Experimental Procedure
3. Results and Discussion
3.1 Microstructural Characterization Of As-Cast Alloy And Composites
3.2 Microstructural Characterization Of Friction Stir Processed Alloy And Composites
3.3 Dry Sliding Wear Behavior Of As-Cast Alloy And Composite With 5 And 10 Wt. % Tib2
3.4 Dry Sliding Wear Behavior Of Friction Stir Processed Alloy And Composites With 5 And 10 Wt.%Tib2, Respectively
3.5 Worn Surface Analysis Of Friction Stir Processed Alloy And Composite
CHALLENGES IN FABRICATION OF SURFACE COMPOSITES BY FRICTION STIR PROCESSING ROUTE
3.1 Al-Cu alloy with TiC reinforcement
3.2 Al-Si alloy with SiC reinforcement
INFLUENCE OF REINFORCEMENT CONTENT ON TENSILE RESPONSE AND FRACTURE BEHAVIOR OF AN ALUMINUM ALLOY METAL MATRIX COMPOSITE
4.1 Initial Microstructure Characterization
4.3 Failure-Damage Analysis
5. Results and Discussion
5.1 Initial Microstructure
5.3 Tensile Fracture Behavior
5.4 Microscopic Mechanisms Governing Fracture
MECHANICAL PROPERTIES OF STEEL ENCAPSULATED METAL MATRIX COMPOSITES
THE EVOLUTION OF SOLID POWDERS IN LIQUID ALUMINUM AT LOW TEMPERATURE AND THE EFFECTS OF ULTRASOUND ON IT
Materials and Experimental Process
SEM Analysis of Control Samples
SEM analysis of Ultrasonically Treated Samples
Formation Mechanism of Small Blocky Al3Ti Particles
Effects of Ultrasound on the Synthesis of In Situ Al3Ti Particles
METAL MATRIX COMPOSITES DIRECTIONALLY SOLIDIFIED
2. Experimental Procedure
3. Results and Discussion
NANOPARTICULATE REINFORCED ALUMINUM ALLOY COMPOSITES PRODUCED BY POWDER METALLURGY ROUTE
GROWTH KINETICS OF MAGNESIO-ALUMINATE SPINEL
IN Αl/Mg LAMELLAR COMPOSITE INTERFACE
Energy dispersive X-ray spectroscopy EDX
COMPOSITE MICROSTRUCTURE and MECHANICAL PROPERTIES
PREDICTION OF CRACK INITIATION SITE IN FASTENER HOLE OF COMPOSITE LAMINATE
3.4 Contact and Boundary Conditions
FINITE ELEMENT ANALYSIS OF QUANTITATIVE PERCUSSION DIAGNOSTICS FOR EVALUATING THE STRENGTH OF BONDS BETWEEN COMPOSITE LAMINATES
Technology Behind Quantitative Percussion Diagnostics
Finite Element Analysis Details
Impact Force Measurements
Finite Element Analysis Results
OXIDATION BEHAVIOR CHARACTERIZATION OF ZIRCONIUM DIBORIDE COMPOSITES AT ABOVE 2000°C
2. Experimental procedure
3. Results and Discussion
ADVANCED COMPOSITES and SYNTACTIC FOAMS
DEVELOPMENT OF LIGHTWEIGHT CARBON NANOFIBER REINFORCED SYNTACTIC FOAM COMPOSITES
3. Results and Discussion
3.1 Thermo-Mechanical Analysis
3.2 Electrical Properties
3.3 Potential Applications
EVALUATION OF SYNTACTIC FOAM FOR ENERGY ABSORPTION AT LOW TO MODERATE LOADING RATES
2.1 Trelleborg syntactic foam
4. Results and discussion
4.3 Energy and Efficiency
STUDY OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF PARTICULATE REINFORCED ALUMINUM MATRIX COMPOSITE FOAM
2.2 Preparation and characterization of foam specimen
3.1 Optimization of blowing agent content
3.2 Optimization of Foaming Temperature
ATMOSPHERIC PLASMA TREATMENT OF NYLON 6,6 FOR IMPROVED INTERFACIAL ADHESION IN THERMOPLASTIC COMPOSITES
2. Experimental Procedure
3. Results and Discussion
NEXT GENERATION CAR – EXAMPLE OF FUNCTION INTEGRATION AT THE LIGHT URBAN VEHICLE (LUV) VEHICLE CONCEPT
Investigation of generic polyurethane foam samples
Generic sandwich elements
Geometric influence on failure behavior
Vehicle concept in sandwich design
THE SYNTHESIS AND PROCESSING OF SELF-HEALING MATERIALS: A LAMELLAR SHAPE MEMORY ALLOY IN COMPOSITE STRUCTURE
3. Results and Discussion
CARBON FIBER REINFORCED COMPOSITES and MODELING & SIMULATIONS
SURFACE MODIFICATION OF CARBON FIBER POLYMER COMPOSITES AFTER LASER STRUCTURING
Materials and Optical Properties
Microstructure Analysis of the Laser Ablation and Structuring
Comparing Strengthening Mechanisms of Vapor Grown Carbon Fiber vs. Titanium Carbide Reinforced Powder Metallurgy Titanium Metal Matrix Composites
2. Experimental Procedure
2.1 Powder mixture preparation
2.2 Spark plasma sintering and hot extrusion
2.3 Materials characterization
3. Results and Discussions
3.3 Solid solute strengthening
3.5 TiC particle reinforcement
3.6 VGCF fiber reinforcement
3.7 Overview of strengthening mechanisms
MICROSTRUCTURAL CHARACTERIZATION OF FATIGUE DAMAGE OF CFRP IN THE VERY HIGH CYCLE FATIGUE REGIME
Introduction and motivation
Experimental setup for cyclic 3-point-bending at ultrasonic frequencies
Base material and specimen design for VHCF-experiments
3D-Scanning Laser Vibrometry
Microscopic investigations and failure mechanisms
EFFECTIVE CREEP RESPONSE and UNIAXIAL TENSION BEHAVIOR OF LINEAR VISCO-ELASTIC POLYMER COMPOSITES
2. Constitutive Equations of Effective Behavior of Linear Viscoelastic Materials
Effective Creep Compliance
3. Macroscopic Stress Strain Behavior
4. Micromechanics Formulations for Effective Coefficients
5.1 Effective creep compliance coefficients
5.2 Macroscopic stress-strain behavior
MOLECULAR DYNAMICS ASSESSMENT OF SMALL MOLECULE DIFFUSION IN MEDICAL PLASTICS
2.1 Molecular dynamics (MD) simulations
2.2 Generalized Langevin equation (GLE)
3. Results and discussion
EFFECT OF T6 TREATMENT ON THE HARDNESS OF CARBON NANOTUBE REINFORCED AA6061 ALUMINIUM ALLOY MATRIX COMPOSITES