Chapter
Effect of Substrate Nature and Electrolysis Modes on Ultramicron and Nanosized Electrolytic Powders Formation Regularities
Creep and Long-Term Strength of Molybdenum Alloy
Yttrium Oxide Wetting Angle Examination
Thermodynamic Modelling of Rare-Earth Elements - Oxygen Interaction
Local Doping of Semiconductor Crystals by Thermomigration
On the Interaction of Calcium and Oxygen in Liquid Iron
Electrochemical Oxide Films Corrosion Properties Diagnosis System for the Thermal Power Equipment Heating Surfaces
Development of the Technology of Eco-Friendly Single-Layer Vitreous Art Enamels for Copper
Applying Compressive Plasma Flows to Improve Adhesion in a Film-Support System
Atomic Structure and Mechanical Properties of Defective Carbon Nanotube (7,7)
Nitriding of Parts of Alloyed Steels with High-Energy Surface Treatment
The Negative Temperature Impact on Hardening of Magnesia Composites
Pressure Dependent Magnetization of Arc Discharge Fe–C Soot
New Medium-Carbon Free-Machining Steels Containing Bismuth and Calcium
Microstructure and Properties of Cast Metal Treated with Electromagnetic Pulses while in Molten State
Optimization of Chemical Composition and Heat Treatment of High-Carbon Iron Alloys with 14% Chromium and 3% Vanadium
A Study of Flat Hot-Deformed Semiproducts Аl-Мg-Mn-Sc-Zr Microstructure, Phase Composition, Crystalline Structure and Mechanical Properties
Formation of Photocatalytic Nano-Centers on the Surface of the Photocatalytic Sorbing Agent
Calculation of Adsorption Parameters for Lithium on Carbon Nanotube (7,7) with a Double Vacancy
Experiments on Obtaining Nanostructured Metallic Materials and their Investigation
Physical Aspects of the Liquid Zones Thermomigration Method for Formation of Electronic Technics Materials with the Required Substructure
Principles of Controlled Exposure in Semiconductor Materials Science of Low-Dimensional Systems
Magnetic Properties of Mn Substituted Barium Hexaferrite Single Crystals
Residual Stress Measurements Using Elasto-Plastic Indentation and ESPI
The Study of Conditions for the Silicon Carbide Crystals Formation in the Complex Composition Metal Melt
Qualitative Identification of Alloys of Precious Metals by Means of Adaptive Changes the Mode Polarization
Thermodynamics of Crystallizing Low-Alloy Boron Steel Melt Components Interaction
Investigation of the Raw Materials' Composition and Ratio Influence on the Structure and Properties of the Foamed Slag Glass
Glass-Ceramic Materials and Coatings Providing Steel Household Products with the Desired Properties
On the Theory of Tetragonality of Martensite Crystals Surrounded with Elastic Matrix
Chapter 2: Innovative Technologies and Cost-Effective Use of Resources of Metallurgy Industry
Improving the Process of High-Temperature Processing Steel-Smelting Dump Slag by Means of Experimental and Theoretical Research
Economical Ceramic Molds in Investment Casting
Computing Simulation of Casting Using Titanium Aluminide Intermetallic Alloys
Ground Granulated Blast-Furnace Slag and its Activation Methods
Surface Hardening of Parts Arc
Environmental Aspects of Lead-Free Free-Machining Steels Production
The Influence of the Current Density in the Open Welding Arc Active Spots on Cathode and Anode Voltage Breakdowns
High-Speed Thin Layer Coating
Intercritical Quench Hardening of Structural Pipeline Steels
Influence of SLM Process Parameters on Porosity of Nickel Base Heat Resistance Alloy EP648
Pilot Testing of the Waste Metalworking Fluids Biosorption Treatment
The Effect of Additives Including Metakaolin on the Freeze Resistance of Concrete
Increase in Wear Resistance by Introduction of Titanium Carbide Dispersed Particles
Methods of Increasing the Speed of the Many-Arc Welding
Surface Modification by Vacuum Arc Plasma Source
Selective Laser Melting of Copper
Materials Engineering and Technologies for Production and Processing
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.