Chapter
Determination of Cl- in Concrete Materials by Ion Chromatography
A New Method for Studying the Damage in Concrete Subjected Single Face Salt Freezing Cycle
Patent Map Analysis of Measurement Technology
Study on the Methods for Measuring Closed Cell Content of Cellular Glass and its Thermal Insulation Performance
Finite Element Analysis of Head-Form Impacting Laminated Glass for Automotive Windscreens
MLD Method for the Determination of Major Components in MgO-Cr Refractory Products
Numerical Simulation of Powder Dispersion Performance by Different Mesh Types
Chapter 2: Advanced Ceramics and Inorganic Composites
High Temperature Oxidation Behavior of Silicon Carbide Ceramic
Influence of Density on the Microstructure, Mechanical, Electrical and Thermal Properties of Recrystallized Silicon Carbide
Shape and Distribution of Pores in SiC Ceramic Membrane Supports Formed by Extrusion Molding
Effects of Silicon Particle Size on the Morphology of Rod-Like Si3N4 Crystals Prepared by SHS Method
Distribution Status of Trace Oxygen in Fe3Si-Si3N4
Spinnable Sol Prepared by NHSG Method Used for Mullite Continues Fiber
On the Factors Influencing the Liquidity of Slip Casting Al2O3 Slurry
Kinetic Studies on Crystallization and Grain Growth of Amorphous Al2O3-ZrO2 Powder
Effects of Withdrawal Speeds on Properties of ZnO Thin Films Prepared by Sol-Gel Immerse Technique
Preparation and Properties of SiO2/Al2O3-SiO2 Fiber Mat Composite Materials
Synthesis Mechanism of ZrB2@A12O3-Y2O3 Composite Powders with Core-Shell Microstructure
Thermal Stability of Aluminum Titanate Ceramics
Crystal Growth and Fracture Behavior of Solidified TiC-TiB2 Prepared by Combustion Synthesis in High-Gravity Field
Machinability and Material Removal Mechanism of Face Centred Cubic (FCC) Conductive Ceramic TiBCN in EDM Processing
Microstructure, Densification and Mechanical Properties of TiB2-TiC-NiAl Ceramic-Based Composite
Reaction Fusion and Spatial Span-Scale Microstructure Evolution of TiB2-Based Ceramic and Metal Achieved by High Gravity Field
Spatial Span-Scale Microstructure Evolution and Ballistic Performance of Laminated Functionally Graded Composites of TiB2-Based Ceramic and Ti-6Al-4V Alloy
Reaction Fusion and 3D-Network Span-Scale Graded Microstructure Evolution in Laminated Composite of TiB2-Based Ceramic and 42CrMo Steel
Ceramic-Metal Functionally Gradient Multilayer Composite Fabricated by Combustion Synthesis in High-Gravity Field
High Temperature Bonding Effect of the Room-Temperature-Curing Phosphate Adhesive for C/C Composites
Structure and Dielectric Properties of Ce and Ca Co-Doped BaTiO3 Ceramics
Synthesis and Characterization of LiZn Ferrites/Carbon Nanotubes (CNTs) Temperature Control Biomaterials
Preparation and Photocatalytic Properties of La, Ce and Nonmetal N Co-Doped TiO2
Preparation and Performance of Mesoporous TiO2 Photocatalyst with P123 as Template
Synthesis of Pyrochlore-Type K2Ta2O6 with High Photocatalytic Activity for Dye Degradation
Combustion Synthesis of La0.65Sr0.35MnO3 and its Sensing Properties for NO2
Potentiometric NO2 Sensor Based on YSZ and WS2
The Mechanism of Controlling Pore Microstructure for YAG Porous Ceramics
Synthesis and Characterization of a Novel Mechanoluminescence Material NaAlSiO4:Eu2+, Ln3+
Silica Encapsulation of SrAl2O4:Eu2+, Dy3+ Phosphors by Sol-Gel Method
The Morphologies and Photoluminescence of Ce3+-Doped 0.5La2O3-2SrO-0.5Al2O3 Phosphors with SrF2
Synthesis and Electrochemical Properties of Functionalized Graphene Oxide/ZnO Composites
Influence of the Preparation Process on the Electrochemical Properties of xLiFePO4·yLi3V2(PO4)3/C Nano-Sized Composite Cathode Materials
Evaluation of the Corrosivity of CaF2 in Hot Water and 10mol%HF Solution
Preparation and Properties of 3mol%YF3-CaF2 Nanopowder
Microstructure and Corrosion Behaviour of Laser-Clad Double-Ceramic-Layer Composite Coating
Preparation and Properties of CaF2 Nano-Powder
The Solution Dependence of Cu Modification During the Synthesis of γ-Fe2O3 Nanoparticles
Investigation on Properties of the Silica Ceramic Cores for the Hollow Blades Prepared by the Conversion of the Silicon Resin
Preparation, Characterization and Visible-Light Catalytic Activity of Core-Shell Structure NiFe2O4@TiO2 Ferrite Nanoparticles
Fabrication of Morphology Controllable Vertically Aligned TiO2 Nanorod Arrays for Dye-Sensitized Solar Cells
Chapter 3: Glasses and Refractories
Analysis of Influence of High Temperature Homogenizing on UV Transmittance of Quartz Glass
Effect of Amphoteric Zn2+ on the Determination of B2O3 Content in Glass
Effects of Iron Oxide on the Crystallization of Calcium Alumino-Silicate Glass
Preparation Process of Glass Membrane Using Non-Solvent Induced Phase Separation
Effects of B2O3 Contents on Crystallization Behaviors and Dielectric Properties of CaO-B2O3-SiO2 Glass Ceramics
Preparation and Performance of Inorganic Thermal Insulation Glazed Hollow Bead Material
Research Progresses of Vacuum Glazing and BIPV
A Study of Environmental Impact Assessment on Intrinsic Energy and Full Life Cycle of Typical Energy-Saving Exterior Windows
Durability of Photovoltaic Laminated Glass Modules Affected by Temperature-Humidity Cycles
Preparation of Waterproof Silica Gel Coatings on Porous Silica Ceramic Substrates
Effect of ZrO2 Additive on the Properties of MgO-Cr2O3 Refractory Used for RH Degasser
A Facile and Reliable Preparing Route of Brown Fused Alumina from Aluminum Dross
Reaction Mechanism of Iron-Rich Magnesia-Corundum Composites at 1420°C
Research on High Temperature Creep Properties of Al2O3-SiO2 Ore (Al2O3 ~ 65)
Investigation on High-Temperature Creep Properties of High-Alumina Bauxite
Compressive Creep Behavior of Low Porosity Fireclay Bricks (LPFBs) for Glass Furnace Regenerator
Chapter 4: Cement-Based Materials and Building Materials
Preparation and Long-Term Stability Study of Steel Fiber/Graphite Conductive Concrete
Device for Pore Solution Extraction from Cement-Based Materials and its Application
Methods for Inhibition of Fluidity Loss of Concrete Mixed with Superplasticizers
Ultrasonic Prediction of 28-Day Compressive Strength of Crumb Rubber Concrete during early Age
The Study of Trial-Mix Strength Calculation Equation of C60 Concrete under Certain Steam Curing Schedule
ERT Imaging of Graphite Electrically Conductive Concrete
Acid Attack Resistance of Magnesium Phosphate Cement
The Effect of Sample Storage and Inspection Equipment on the Rheological Property of Oil Well Cement
Chloride Ion Erosion in Concrete under Sustained Axial Pressure
Influence of Environmental Humidity and Test Depth on the Measured Gas Permeability of Concrete
Effect of Low Content of Metakaolin Addition on the Properties and Pore Structure of Concrete
Hydration Products, Microstructure and Durability of Concrete with Metakaolin Addition
Effect of Fly Ash Composition and Structure on the Formation of Cement Clinker
Effect of F-S Mineralizer on the Calcination of Recycled Cement Clinker Produced from Waste Concrete
Hydration Properties and Sulfate Attack of Composite Cement Mixed with High Titanium Slag
Effect of Heat-Treatment on Microstructure and Mechanical Properties of Magnesium Phosphate Cement
Research Progress of Crumb Rubber Mortar
Influence of Calcium Sulfate Varieties on Properties of Calcium Aluminate Cement-Based Self-Leveling Mortars
Characterization and Cementitious Properties of BOF Slag
Comparison of Hydration Mechanism between Cements from Two Different Residual Muds
Greenhouse Effect Reduction through Sustainable Magnesium Oxide Eco-Cement Products
Qualitative and Quantitive Analysis of the Active Component in Silane Building Protective Agents
Study on the Threshold Value and Test Methods for Chloride Ion Content in Sea Sand
Simulation and Survey of Stratum Disturbance for Shield Tunneling in Water-Rich Soil Layers
Chapter 5: Applied Engineering Materials
Characterization and Vertical Elements Distribution of ZnGeP2 Single Crystals
CrN Coatings at Different Substrate Temperatures Prepared by Single D.C. Magnetron Sputtering Target
Influence of Nitrogen Content on Properties of CrN Coatings Deposited by Single Target Magnetron Sputtering
Epitaxial Growth of Copper Film by MOCVD
Studies of Pd-Ag Thin Film for Hydrogen Sensor
Preparation and Photoluminescence Properties of RE-Doped GaN Film by Sol-Gel Method
A Novel Electrolyte Protect Layer for Aqueous Lithium-Air Battery
Effects of Diluent on Mechanical Properties of Hollow Glass Microsphere Reinforced Epoxy Resin Composite
Preparation, Structure and Thermolysis Characteristics of Ammonia Borane
Preparation of Ultra-Fine Clarithromycin Particles by Anti-Solvent Recrystallization
Sonophotocatalytic Degradation and Mineralization of Bisphenol A in a Sequential Ultrasound Intensified Photocatalytic Reactor
PMAA-g-CS/Loess Composite for Removing Lead Ions
Thermal Reaction and Phase Evolution of APP/Al(OH)3/α-SiO2
Water-Based Route to Synthesis of High-Quality UV-Blue Photoluminescing ZnSe/ZnS Core/Shell Quantum Dots and their Physicochemical Characterization
Spectra Analysis of some Europium(III)/Terbium(III) Complexes
Durability of Fracture-Filled Emeralds with a New Artificial Filler ExCel
Simulating Discrimination for Quality Evaluation of Rubelite Red
Characteristics of Metallurgical Waste Slag and its Heating Behavior in a Microwave Field