Description
Using of special concretes and composites is often closely connected with severe loading conditions of final elements. Design and development of mentioned materials must take account into knowledge of basic properties of all components, because they could be special by their binder system, used fillers or by other technological solutions. Edition will be useful for experts and practical engineers in the field of using concrete and composite materials in the different areas of construction.
Concrete, Cement, Additive, Composites
Materials Science
Chapter
Differences in the Mechanical Properties of Lightweight Refractory Cementitious Composites Reinforced by Various Types of Fibers
Determination of Properties of Concrete Floor after a Fire and Renovation
Possible Types of Degradation of Concrete in the Power Industry
Experimental Verification of Behavior of Glass and Carbon Fibers in Alkali Environment
Effect of Very Early Prestressing on Ultimate Geometry of Precast Concrete Element
Multi-Functional High-Performance Cement Based Composite
Enhancing Engineered Cementitious Composite by External and Internal Hydrophobization
Chapter 2: Additives and Admixtures
Comparative Investigations of some Properties of Lightweight Cement Concretes Containing Siliceous Fly Ash
Characteristic Properties of the Fly Ash from Coal Combustion
Frost Resistance of Concrete Screed with the Fly Ash Addition
Rheological Characteristics of Alkali Activated Fly-Ash Concrete Mixtures
Hygric Properties of HPC with Natural Pozzolana
Dosage of Silica Fume in High Performance Concrete
Comparison of the Effects of Different Pozzolana on the Properties of Self-Compacting Concrete
Concrete with Crystalline Admixture for Ventilated Tunnel against Moisture
Influence of Microwave Treatment on Properties of Concrete with Non-Cyclic Alkanes
Porosity of the Ternary Gypsum-Based Binders with Different Types of Pozzolan
Increasing the Efficiency of Asphalt by Introducing Additives Containing Polyphosphoric Acid
Properties of Cement Paste with Incorporated Sodium Silicate
Changes of the Properties of Cement Paste with Fly Ash Exposed to the High Temperature
Resistance of Concrete with Metakaolin Addition to Acid Environment
Influence of the Heating and Cooling Rate on Thermal Performance of Cement-Lime Plaster with PCM Admixture
Chapter 3: Experimental Methods of Assessment and Measurements of Basic Properties
Finite Element Simulation of Hydration Heat Using Fuzzy Logic Model of Hydration
Determination of Thermal Conductivity on Lightweight Concretes
Using 2D Digital Image Analysis to Locate Position of Micro Fibers in Cross-Sections of Fiber-Reinforced Concrete
Plastic Shrinkage of Concrete – Measurement and Method for its Reducing
Evaluation of the Modulus of Elasticity of Different Types of Concrete Compared with Eurocode 2
Basic Physical and Mechanical Properties of Composites Based on Three Different Cements
Impact of Grinding Technology on Final Properties of Portland Cement
Inelastic Material Models for Numerical Analysis of Unreinforced Compressed Masonry Columns
The Effect of Surface Treatments of Textile Reinforcement on Mechanical Parameters of HPC Facade Elements
Comparison of Compressive Strength and Young’s Modulus of Cement Samples with Different Types of Aggregate
Relation between Parameters of Plasters Measured by Non-Destructive and Destructive Methods
Chapter 4: Sustainable Concrete and Composite Materials
Sustainability Considerations of Concrete Mixes Incorporating Slag as Partial Replacement of Cement in Concrete in the UAE
Recycled Concrete in Weak Acidic Environments
High Performance Concrete with SCM and Recycled Aggregate
Influence of Moisture Content on the Thermal Properties of Concrete Containing Agricultural Waste Materials
Tests of Selected Properties of Aggregates on Ceramic Wastes
A Study on the Application of Artificial Neural Networks on Green Self Consolidating Concrete (SCC) under Hot Weather
Behavior of Concrete Containing of Fine Recycled Aggregate
Determining Concrete Composition on Recycled Aggregates
Energy Saving Additives «RAA WAC» for Production of Warm Asphalt Concrete
The Use of Recycled Concrete in Asphalt Composites
Timber-Concrete Composite Structures with Semi-Rigid Connections
Influence of Recycled Concrete Composition on its Elastic Stiffness
The Properties of Fine-Aggregate Concrete with Recycled Cement Powder
Special Concrete and Composites 2015
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.