Dynamic modeling and control design for a parallel-mechanism-based meso-milling machine tool

E-ISSN： 1469-8668|32|4|515-532

ISSN： 0263-5747

Source： Robotica, Vol.32, Iss.4, 2014-07, pp. : 515-532

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Dynamic model and force control of the redundantly actuated parallel manipulator of a 5-DOF hybrid machine tool

Robotica, Vol. 27, Iss. 1, 2009-01 ,pp. : 59-65

Cambridge University Press

Access to resources Recommend Favorite

Two-mode overconstrained three-DOFs rotational-translational linear-motor-based parallel-kinematics mechanism for machine tool applications

Robotica, Vol. 25, Iss. 4, 2007-07 ,pp. : 461-466

Cambridge University Press

Access to resources Recommend Favorite

Dynamic dexterity of a planar 2-DOF parallel manipulator in a hybrid machine tool

Robotica, Vol. 26, Iss. 1, 2008-01 ,pp. : 93-98

Cambridge University Press

Access to resources Recommend Favorite

Motion control of the 2-DOF parallel manipulator of a hybrid machine tool

Robotica, Vol. 28, Iss. 6, 2010-10 ,pp. : 861-868

Cambridge University Press

Access to resources Recommend Favorite

The dynamic modeling, redundant-force optimization, and dynamic performance analyses of a parallel kinematic machine with actuation redundancy

Robotica, Vol. 33, Iss. 2, 2015-02 ,pp. : 241-263

Cambridge University Press

Access to resources Recommend Favorite