Author： Bermanec Lovorka Grgec Zvizdic Davor
Publisher： Edp Sciences
E-ISSN： 2107-6847|6|3|307-307
ISSN： 2107-6839
Source： International Journal of Metrology and Quality Engineering, Vol.6, Iss.3, 2015-10, pp. : 307-307
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
This paper describes procedure and results of the interlaboratory comparison that was organised by Croatian national pressure laboratory (HMI/FSB-LPM) between eight accredited pressure calibration laboratories. Comparison was performed in the gauge pressure range from 0 to 2 MPa with pressure transducer as transfer standard and using gas as transmitting medium. Basic aim of this comparison was to improve measurement methods and the measurement uncertainties of each participating laboratory. Analysis of the measurement results are given by calculating the deviation,
Related content
By Silva M.A.F. Moura M.H. Nogueira R. Costa S.R.R.
International Journal of Metrology and Quality Engineering, Vol. 4, Iss. 2, 2013-11 ,pp. :
Access to resources
Recommend
A Comparison of Three Geometric Self-Calibration Methods for Range Cameras
By Lichti Derek D. Kim Changjae
Remote Sensing, Vol. 3, Iss. 5, 2011-05 ,pp. :
Access to resources
Olfactometric Interlaboratory Comparison Test 2005
Proceedings of the Water Environment Federation, Vol. 2006, Iss. 3, 2006-01 ,pp. :