Publisher: Trans Tech Publications
E-ISSN: 1662-9795|2017|730|339-344
ISSN: 1013-9826
Source: Key Engineering Materials, Vol.2017, Iss.730, 2017-03, pp. : 339-344
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
In this study, the tube material for Self-Inflating Tire was synthesized. A few suitable materials for the tube material compounding process were identified through a literature review. Using the material properties of this tube, CAE modeling was done for analysis. The ANSYS Fluid Structure Interaction (FSI) method was then used to consider the internal flow with the structure. In addition, a machine was prepared for testing the performance of the tube. The results of the CAE analysis were compared with results of the testing machine. The developed equipment and systems can be used for the manufacture of high-performance and safe tires. Finally, the prototype of the tube was prepared and fitted in a tire, and the driving performance of the vehicle tested. Using this test result, compatibility of the tube's material has been confirmed.
Related content
By Kapoor K. Saxena V.K. Swamy S.V. Saratchandran N. Malakondaiah G. Kashyap B.P.
Practical Failure Analysis, Vol. 2, Iss. 3, 2002-06 ,pp. :
Properties of a Candu Calandria Tube
By Ells C. E. Coleman C. E. Chow C. K.
Canadian Metallurgical Quarterly, Vol. 24, Iss. 3, 1985-07 ,pp. :
IOP Conference Series: Materials Science and Engineering, Vol. 108, Iss. 1, 2016-03 ,pp. :