Publisher： Edp Sciences
E-ISSN： 2261-236x|107|issue|00055-00055
ISSN： 2261-236x
Source： MATEC Web of conference, Vol.107, Iss.issue, 2017-05, pp. : 00055-00055
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
In presented paper the composite wall structure made of concrete and Zahorski/Mooney Rivlin rubber cross pads subjected to impact loads was investigated. Mentioned rubber cross pads were assumed to be inserted or injected in specially formed holes during the production process. Moreover, two different impact loads were taken into further considerations - pressure and concentrated force. Such impact loads due to the small time step size allowed observation of mechanical wave propagation in analyzed structure in the form of stress plots. On the basis of composite wall comparison with the solid concrete wall it could be stated that the mechanical wave propagation was significantly damped via inserted/injected rubber cross pads. Discussed problem was solved with the use of finite element method using ADINA program.
Related content
Access to resources
Recommend
By Shi Dong-Yan Ai Hong-Xu Wang Zhi-Kai
INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 250, Iss. 3, 2015-08 ,pp. :
By Harper Steven R. Thurston Deborah L. Krein Philip T.
International Journal of Critical Infrastructures, Vol. 3, Iss. 1-2, 2006-12 ,pp. :
Dynamic response of plates on elastic foundation under eccentric impact load
MATEC Web of conference, Vol. 120, Iss. issue, 2017-08 ,pp. :
Access to resources
Simulation of Structure Dynamic Stress under Multi-load Condition in Resonance State
By Li Fansong
MATEC Web of conference, Vol. 165, Iss. issue, 2018-05 ,pp. :