20 kHz 3-point bending fatigue of automotive steels

E-ISSN： 2261-236x|165|issue|22020-22020

ISSN： 2261-236x

Source： MATEC Web of conference, Vol.165, Iss.issue, 2018-05, pp. : 22020-22020

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Audibility of complex tones above 20 kHz

By Ashihara K.

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2000, Iss. 3, 2000-08 ,pp. : 4565-4571

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Disinfection of Wastewater Using a 20-kHz Ultrasound Unit

By Madge Bethany A. Jensen James N.

Water Environment Research, Vol. 74, Iss. 2, 2002-03 ,pp. : 159-169

Water Environment Federation

Access to resources Recommend Favorite

Calibrating 1/4" condenser microphones to 100 kHz using a point-like source simulation device

By Brown Martha C. Selner John M.

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1993, Iss. 1, 1993-05 ,pp. : 503-510

Institute of Noise Control Engineering

Access to resources Recommend Favorite

1 kHz - piston phone

By Sugimoto K.

INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 1975, Iss. 2, 1975-08 ,pp. : 595-598

Institute of Noise Control Engineering

Access to resources Recommend Favorite

Thermomechanical fatigue of stainless steels for automotive exhaust systems

By Santacreu P. -O. Bucher L. Koster A. Remy L.

Revue de Métallurgie, Vol. 103, Iss. 1, 2006-02 ,pp. : 37-42

Edp Sciences

Access to resources Recommend Favorite