

Author: Gao Tieyu Liu Changwei
Publisher: MDPI
E-ISSN: 1996-1073|10|8|1185-1185
ISSN: 1996-1073
Source: Energies, Vol.10, Iss.8, 2017-08, pp. : 1185-1185
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The conditions of heat source and heat sink in a geothermal ORC system may frequently vary due to variations in geological conditions, ambient temperature and actual operation. In this study, an off-design performance prediction model for geothermal ORC systems is developed according to special designs of critical components, and an optimal control strategy which regards the turbine guide vane angle, the refrigerant pump rotational speed and the cooling water mass flow rate as control variables is proposed to maximize the net power output. Off-design performances of both subcritical and supercritical ORCs are analyzed. The results indicate that, under the optimal control strategy, the net power output of both ORCs increase with greater geothermal water mass flow rate, higher geothermal water inlet temperature and lower cooling water inlet temperature, which is mainly due to a greater working fluid mass flow rate, higher turbine inlet pressure and lower condensing pressure, respectively. The net power output of supercritical ORC is always greater than that of subcritical ORC within the range of this study, but the difference tends to decrease when supercritical ORC activates the geothermal water reinjection temperature restriction.
Related content




Performance of supercritical cycles for geothermal binary design
Energy Conversion and Management, Vol. 43, Iss. 7, 2002-05 ,pp. :


By Lazova Marija Kaya Alihan Billiet Marijn Lecompte Steven Manolakos Dimitris De Paepe Michel
Energies, Vol. 10, Iss. 5, 2017-05 ,pp. :


Optimal design of advanced power systems under uncertainty
By Diwekar U.M. Rubin E.S. Frey H.C.
Energy Conversion and Management, Vol. 38, Iss. 15, 1997-10 ,pp. :