Publisher： Trans Tech Publications
E-ISSN： 1662-9795|2018|777|416-420
ISSN： 1013-9826
Source： Key Engineering Materials, Vol.2018, Iss.777, 2018-10, pp. : 416-420
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The natural rubber compound of each layer of solid tire had determined the mechanical properties in tension. It was found that the stress-strain relation of each material tire layer was fitted very well with the Ogden constitutive model. The R2 which was 0.986, 0.996 and 0.985 represented the certain curve fitting on the internal, middle and tread layer of solid tire, respectively. Subsequently, the Ogden model was implemented in the finite element model of the rubber specimen and solid tire. The finite element analysis results obtained an average error of 18.00% and 14.63% for the specimen and solid tire model by comparing to the physical experiment, respectively. Particularly, the mechanical properties of the natural compounds could be used to predict the ultimate compression load for the solid tire failure.
Related content
Finite Element Analysis of Hyperelastic Material Model for Non-Pneumatic Tire
Key Engineering Materials, Vol. 2018, Iss. 775, 2018-09 ,pp. :
Access to resources
Recommend
Material Properties of Natural Rubber Solid Tires for Finite Element Analysis
Key Engineering Materials, Vol. 2018, Iss. 775, 2018-09 ,pp. :
Stress Analysis and Design of Main Reducer Housing Using Finite Element Method
MATEC Web of conference, Vol. 221, Iss. issue, 2018-10 ,pp. :
Access to resources
Strength analysis of connecting rods with pistons using finite element method
MATEC Web of conference, Vol. 204, Iss. issue, 2018-09 ,pp. :
Strenght analysis chassis of UM electric cars using finite element method
MATEC Web of conference, Vol. 204, Iss. issue, 2018-09 ,pp. :