Comparison between mechanical stress and bone mineral density in the femur after total hip arthroplasty by using subject-specific finite element analyses

Publisher： Taylor & Francis Ltd

E-ISSN： 1476-8259|18|10|1056-1065

ISSN： 1025-5842

Source： Computer Methods in Biomechanics and Biomedical Engineering, Vol.18, Iss.10, 2015-07, pp. : 1056-1065

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Prediction of the vertebral strength using a subject-specific finite-element model

By Sapin E.   Jolivet E.   Mitton D.   Skalli W.  

Computer Methods in Biomechanics and Biomedical Engineering, Vol. 12, Iss. 1, 2009-08 ,pp. : 225-226

Taylor & Francis Ltd

Access to resources Recommend Favorite

Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol

By Piccinini Marco   Cugnoni Joel   Botsis John   Zacchetti Giovanna   Ammann Patrick   Wiskott Anselm  

Computer Methods in Biomechanics and Biomedical Engineering, Vol. 17, Iss. 13, 2014-10 ,pp. : 1403-1417

Taylor & Francis Ltd

Access to resources Recommend Favorite

Influence of femoral stem geometry, material and extent of porous coating on bone ingrowth and atrophy in cementless total hip arthroplasty: an iterative finite element model

By Folgado J.   Fernandes P. R.   Jacobs C. R.   Pellegrini V. D.  

Computer Methods in Biomechanics and Biomedical Engineering, Vol. 12, Iss. 2, 2009-04 ,pp. : 135-145

Taylor & Francis Ltd

Access to resources Recommend Favorite

Peri-implant Bone Remodeling after Total Hip Replacement Combined with Systemic Alendronate Treatment: A Finite Element Analysis

By Peter B.   Ramaniraka N.   Rakotomanana L.R.   Zambelli P.Y.   Pioletti D.P.  

Computer Methods in Biomechanics and Biomedical Engineering, Vol. 7, Iss. 2, 2004-04 ,pp. : 73-78

Taylor & Francis Ltd

Access to resources Recommend Favorite

Development and validation of a subject-specific finite element model of a human clavicle

By Li Zuoping   Kindig Matthew W.   Kerrigan Jason R.   Kent Richard W.   Crandall Jeff R.  

Computer Methods in Biomechanics and Biomedical Engineering, Vol. 16, Iss. 8, 2013-08 ,pp. : 819-829

Taylor & Francis Ltd

Access to resources Recommend Favorite