Correlation between morphological properties and thermal conductivity of injection‐molded polyamide 46

Publisher： John Wiley & Sons Inc

E-ISSN： 1548-2634|55|10|2231-2236

ISSN： 0032-3888

Source： POLYMER ENGINEERING & SCIENCE, Vol.55, Iss.10, 2015-10, pp. : 2231-2236

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Correlation between morphological properties and thermal conductivity of injection‐molded polyamide 46

By  

POLYMER ENGINEERING & SCIENCE, Vol. 32-3888, Iss. 10, 2015-10 ,pp. : 2231-2236

John Wiley & Sons Inc

Access to resources Recommend Favorite

Mechanical and crystallographic properties of injection‐molded polyamide 66/sepiolite nanocomposites with different clay loading

By  

POLYMER COMPOSITES, Vol. 36, Iss. 12, 2015-12 ,pp. : 2326-2333

John Wiley & Sons Inc

Access to resources Recommend Favorite

Reducing water sorption of injection‐molded polyamide 6 bars by polymerization‐induced diffusion of styrene and grafting with polystyrene

By  

JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 135, Iss. 18, 2018-05 ,pp. : n/a-n/a

John Wiley & Sons Inc

Access to resources Recommend Favorite

Effect of flow induced alignment on the thermal conductivity of injection molded carbon nanotube‐filled polystyrene nanocomposites

By  

POLYMER ENGINEERING & SCIENCE, Vol. 55, Iss. 4, 2015-04 ,pp. : 753-762

John Wiley & Sons Inc

Access to resources Recommend Favorite

Effect of melt flow on morphology and linear thermal expansion of injection‐molded ethylene–propylene–diene terpolymer/isotactic polypropylene blends

By  

POLYMER INTERNATIONAL, Vol. 64, Iss. 9, 2015-09 ,pp. : 1225-1234

John Wiley & Sons Inc

Access to resources Recommend Favorite