Creep properties of a powder metallurgy disk superalloy at 700 °C

E-ISSN： 2044-5326|32|3|624-633

ISSN： 0884-2914

Source： Journal of Materials Research, Vol.32, Iss.3, 2017-01, pp. : 624-633

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Modeling of powder metallurgy processes

By Pokorska Iwona

Advanced Powder Technology, Vol. 18, Iss. 5, 2007-09 ,pp. : 503-539

VSP

Access to resources Recommend Favorite

Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration

Journal of Materials Research, Vol. 32, Iss. 19, 2017-08 ,pp. : 3769-3776

Cambridge University Press

Access to resources Recommend Favorite

Effect of SiC Nanoparticles Content and Mg Addition on the Characteristics of Al/SiC Composite Powders Produced via In Situ Powder Metallurgy Method

By Moazami-Goudarzi Mohammad Akhlaghi Farshad

Particulate Science and Technology, Vol. 31, Iss. 3, 2013-05 ,pp. : 234-240

Taylor & Francis Ltd

Access to resources Recommend Favorite

Effect of powder size on microstructure and mechanical properties of Ti(C,N) based cermets

By Liu N. Zhou J. Zhang X. B. Rong C. L.

Advances in Applied Ceramics, Vol. 106, Iss. 5, 2007-10 ,pp. : 247-254

Maney Publishing

Access to resources Recommend Favorite

Phenomenon on strain-induced precipitation and coarsening of carbides in H13 at 700 °C

Journal of Materials Research, Vol. 31, Iss. 24, 2016-12 ,pp. : 3841-3849

Cambridge University Press

Access to resources Recommend Favorite