Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

Publisher： John Wiley & Sons Inc

E-ISSN： 1098-2329|33|1|adv.21380-adv.21380

ISSN： 0730-6679

Source： ADVANCES IN POLYMER TECHNOLOGY, Vol.33, Iss.1, 2014-03, pp. : n/a-n/a

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Fabrication of highly expanded thermoplastic polyurethane foams using microcellular injection molding and gas‐laden pellets

By  

POLYMER ENGINEERING & SCIENCE, Vol. 32-3888, Iss. 11, 2015-11 ,pp. : 2643-2652

John Wiley & Sons Inc

Access to resources Recommend Favorite

Fabrication of highly expanded thermoplastic polyurethane foams using microcellular injection molding and gas‐laden pellets

By  

POLYMER ENGINEERING & SCIENCE, Vol. 55, Iss. 11, 2015-11 ,pp. : 2643-2652

John Wiley & Sons Inc

Access to resources Recommend Favorite

A New Extensional Mixing Element for Improved Dispersive Mixing in Twin‐Screw Extrusion, Part 2: Experimental Validation for Immiscible Polymer Blends

By  

ADVANCES IN POLYMER TECHNOLOGY, Vol. 37, Iss. 1, 2018-02 ,pp. : 167-175

John Wiley & Sons Inc

Access to resources Recommend Favorite

Preparation and properties of thermoplastic polyurethane/ultra high molecular weight polyethylene blends

By  

POLYMER COMPOSITES, Vol. 36, Iss. 5, 2015-05 ,pp. : 897-906

John Wiley & Sons Inc

Access to resources Recommend Favorite

Injection Molding of Wood-Fiber/Plastic Composite Foams

By Yoon J.D.   Kuboki T.   Jung P.U.   Wang J.   Park C.B.  

Composite Interfaces, Vol. 16, Iss. 7-9, 2009-10 ,pp. : 797-811

Taylor & Francis Ltd

Access to resources Recommend Favorite