Analytical compressive stress–strain model for concrete confined with high‐strength multiple‐tied‐spiral transverse reinforcement

Publisher： John Wiley & Sons Inc

E-ISSN： 1541-7808|27|2|tal.1416-tal.1416

ISSN： 1541-7794

Source： THE STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS (ELECTRONIC), Vol.27, Iss.2, 2018-02, pp. : n/a-n/a

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Concurrent flexural strength and ductility design of RC beams via strain‐gradient‐dependent concrete stress–strain curve

By  

THE STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS (ELECTRONIC), Vol. 24, Iss. 9, 2015-06 ,pp. : 629-652

John Wiley & Sons Inc

Access to resources Recommend Favorite

Compressive Strength Development of High Strength High Volume Fly Ash Concrete by Using Local Material

By  

Materials Science Forum, Vol. 2016, Iss. 872, 2016-10 ,pp. : 271-275

Trans Tech Publications

Access to resources Recommend Favorite

A new model for concrete edge failure of multiple row anchorages with supplementary reinforcement—Reinforcement failure

By  

STRUCTURAL CONCRETE, Vol. 18, Iss. 6, 2017-12 ,pp. : 893-901

John Wiley & Sons Inc

Access to resources Recommend Favorite

Bond behaviour of normal‐ and high‐strength recycled aggregate concrete

By  

STRUCTURAL CONCRETE, Vol. 16, Iss. 1, 2015-03 ,pp. : 56-70

John Wiley & Sons Inc

Access to resources Recommend Favorite

Strain rate dependent mechanical properties of a high‐strength poly(methyl methacrylate)

By  

JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 135, Iss. 17, 2018-05 ,pp. : n/a-n/a

John Wiley & Sons Inc

Access to resources Recommend Favorite