A modified model for the penetration into moderately thick plates by a rigid, sharp-nosed projectile

Author： Li Q.M.   Weng H.J.   Chen X.W.  

Publisher： Elsevier

ISSN： 0734-743X

Source： International Journal of Impact Engineering, Vol.30, Iss.2, 2004-02, pp. : 193-204

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Related content

Nonlinear transient analysis of moderately thick rectangular composite plates

By  

The Aeronautical Journal, Vol. 114, Iss. 1157, 2010-07 ,pp. : 437-444

Cambridge University Press

Access to resources Recommend Favorite

Design of shear reinforcement for thick plates using a strut-and-tie model

By Marzouk H.   Rizk E.   Tiller R.  

Canadian Journal of Civil Engineering, Vol. 37, Iss. 2, 2010-02 ,pp. : 181-194

NRC Research Press

Access to resources Recommend Favorite

Model adaptivity for finite element analysis of thin or thick plates based on equilibrated boundary stress resultants

By Bohinc Uroš   Ibrahimbegovic Adnan   Brank Boštjan  

Engineering Computations: Int J for Computer-Aided Engineering, Vol. 26, Iss. 1-2, 2009-01 ,pp. : 69-99

Emerald Group Publishing Ltd

Access to resources Recommend Favorite

Crack width model for thick reinforced concrete plates subjected to in-plane forces

By Dawood N.   Marzouk H.  

Canadian Journal of Civil Engineering, Vol. 38, Iss. 11, 2011-11 ,pp. : 1262-1273

NRC Research Press

Access to resources Recommend Favorite

Determination of an empirical model for the prediction of penetration hole diameter in thin plates from hypervelocity impact

By Hill S.A.  

International Journal of Impact Engineering, Vol. 30, Iss. 3, 2004-03 ,pp. : 303-321

Elsevier

Access to resources Recommend Favorite