Cutting path generation of the Stewart-Platform-Based Milling Machine using an end-mill

ISSN： 0020-7543

Source： International Journal of Production Research, Vol.39, Iss.7, 2001-05, pp. : 1367-1383

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Related content

Two-dimensional representation of machining geometry and tool path generation for ball-end milling of sculptured surfaces

By Yoon Joung-Hahn

International Journal of Production Research, Vol. 45, Iss. 14, 2007-07 ,pp. : 3151-3164

Taylor & Francis Ltd

Access to resources Recommend Favorite

Fast tool path generation by the iso-scallop height method for ball-end milling of sculptured surfaces

By Yoon Joung-Hahn

International Journal of Production Research, Vol. 43, Iss. 23, 2005-12 ,pp. : 4989-4998

Taylor & Francis Ltd

Access to resources Recommend Favorite

Unified rough cutting tool path generation for sculptured surface machining

By Tao S. Ting K-L.

International Journal of Production Research, Vol. 39, Iss. 13, 2001-09 ,pp. : 2973-2989

Taylor & Francis Ltd

Access to resources Recommend Favorite

Interference-free tool path generation for 5-axis sculptured surface machining using rational Bézier motions of a flat-end cutter

By Zhang W.

International Journal of Production Research, Vol. 43, Iss. 19, 2005-10 ,pp. : 4103-4124

Taylor & Francis Ltd

Access to resources Recommend Favorite

Tool path optimisation for flank milling ruled surface based on the distance function

By Zhang Xiao-Ming Zhu Li-Min Zheng Gang Ding Han

International Journal of Production Research, Vol. 48, Iss. 14, 2010-01 ,pp. : 4233-4251

Taylor & Francis Ltd

Access to resources Recommend Favorite