First Order Seismic Microzonation of Haldia, Bengal Basin (India) Using a GIS Platform

ISSN： 0033-4553

Source： pure & applied geophysics PAGEOPH, Vol.165, Iss.7, 2008-07, pp. : 1325-1350

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

The seismic microzonation of the Bengal Basin, Haldia region, India is carried out using the Analytical Hierarchy Process (AHP) on the Geographic Information System (GIS). Three themes are used for the seismic microzonation, namely Peak Ground Acceleration (PGA), predominant frequency and elevation map. An analysis of the maximum magnitude (m _max) and the b value is carried out after preparing the earthquake catalogue from various sources. On the basis of the tectonic set up and seismicity of the region, five seismic zones are delineated which can be a threat to Haldia. They are broadly classified as Zone 1: Arakan-Yoma Zone (AYZ), Zone 2: Himalayan Zone (HZ), Zone 3: Shillong Plateau Zone (SPZ), Zone 4: Bay of Bengal Zone (BBZ) and Zone 5: Shield Zone (SZ). The m _max for Zones 1, 2, 3, 4 and 5 are 8.30 ± 0.51, 9.09 ± 0.58, 9.20 ± 0.51, 6.62 ± 0.43 and 6.61 ± 0.43, respectively. The PGA value is computed for Haldia following the attenuation relationship taking the m _max of each source zone. The expected PGA at Haldia varies from 0.09-0.19 g. The predominant frequency of Haldia is also calculated using the H/V ratio with a frequency ranging from 0.1-3.0 Hz. The elevation map of Haldia is also generated using the Shuttle Radar Topography Mission (STRM) data. A first-order seismic microzonation map of Haldia is prepared in which four zones of hazard have been broadly classified for Haldia as very high seismic hazard zone, high seismic hazard zone, moderate seismic hazard zone and less seismic hazard zone. The very high seismic hazard zone is observed along the southern part of Haldia where there are major industrial and port facilities. The PGA for the four hazard zones are: 0.09-0.13 g for low hazard zone, > 0.13-0.15 g for moderate hazard zone, > 0.15-0.16 g for high hazard zone and > 0.16-0.19 g for very high hazard zone.