Author： Wei Xing Lu Yafei Huang Li
Publisher： Taylor & Francis Ltd
ISSN： 0360-2559
Source： Polymer-Plastics Technology and Engineering, Vol.50, Iss.2, 2011-01, pp. : 190-195
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The blends of ultrahigh molecular weight polyethylene (UHMWPE), polycarbonate (PC) compatibilized by using a high-density polyethylene (HDPE) grafted with maleic anhydride (MAH), HDPE-g-MAH, were processed by melt extrusion. Two grafting degree of HDPE-g-MAH, 0.5% and 1.2%, were separately prepared by melt-graft and solution-graft methods. The grafting degree of HDPE-g-MAH shows a significant role in enhancing tensile strength of the blends. The compatibilization mechanism of HDPE-g-MAH in the blends analyzed by FTIR indicates that a new grafting product, HDPE-g-PC, was in situ formed. The improvement of phase interface between UHMWPE and PC by addition of HDPE-g-MAH was observed by SEM.
Related content
Access to resources
Recommend
By Jazani Omid Moini Arefazar Ahmad Jafari Seyed Hassan Peymanfar Mohammad Reza Saeb Mohammad Reza Talaei Alireza
Polymer-Plastics Technology and Engineering, Vol. 52, Iss. 2, 2013-01 ,pp. :
By Sanjani Naser Sharifi Alipour Azita Nikfarjam Nasser
Polymer-Plastics Technology and Engineering, Vol. 52, Iss. 13, 2013-10 ,pp. :