Monte Carlo Simulation of Sudden Death Bearing Testing

ISSN： 0569-8197

Source： ASLE Transactions (American Society of Lubrication Engineers), Vol.47, Iss.2, 2004-04, pp. : 188-199

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Monte Carlo simulations combined with sudden death testing were used to compare resultant bearing lives to the calculated bearing life and the cumulative test time and calendar time relative to sequential and censored sequential testing. A total of 30,960 virtual 50-mm bore deep-groove ball bearings were evaluated in 33 different sudden death test configurations comprising 36, 72, and 144 bearings each. Variations in both life and Weibull slope were a function of the number of bearings failed independent of the test method used and not the total number of bearings tested. Variations inL10life as a function of number of bearings failed were similar to variations in life obtained from sequentially failed real bearings and from Monte Carlo (virtual) testing of entire populations. Reductions up to 40%in bearing test time and calendar time can be achieved by testing to failure or theL50life and terminating all testing when the last of the predetermined bearing failures has occurred. Sudden death testing is not a more efficient method to reduce bearing test time or calendar time when compared to censored sequential testing.