Author： Abdullah Rasheed Abu Shreehah Tareq
Publisher： Taylor & Francis Ltd
ISSN： 1091-0344
Source： Machining Science and Technology, Vol.9, Iss.4, 2005-01, pp. : 589-599
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
The aim of this work was to improve the accuracy of the concave profile worm thread by using a new generating surface of grinding wheel. To support the geometrical and technological optimization, the current article describes how we produced a smooth and accurately finished tool that will provide maximum line of contact between the tool and the worm with minimum stress concentration at any point. The present study proposed grinding the thread with grinding wheel having a curvature profile in the axial plane in the form of an arc of hyperbola. The generating equation of the tool profile and its arrangement with respect to the worm during grinding were determined.
Related content
Electrolytic magnetic abrasive finishing
By Yan B.-H. Chang G.-W. Cheng T.-J. Hsu R.-T.
International Journal of Machine Tools and Manufacture, Vol. 43, Iss. 13, 2003-10 ,pp. :
Access to resources
Recommend
Rational Research of Deep Concave Open-Pit Slope Angle of Lower Part
Applied Mechanics and Materials, Vol. 2014, Iss. 716, 2015-02 ,pp. :
Acoustic Field Calculation of Ultrasonic Phased Array Concave Cylindrical Transducer
Applied Mechanics and Materials, Vol. 2014, Iss. 716, 2015-02 ,pp. :
ABRASIVE-BASED NANO-FINISHING TECHNIQUES: AN OVERVIEW
By Jain V. K.
Machining Science and Technology, Vol. 12, Iss. 3, 2008-07 ,pp. :