Author: Muscio A. Grinzato E.
Publisher: Taylor & Francis Ltd
ISSN: 1521-0537
Source: Heat Transfer Engineering, Vol.23, Iss.2, 2002-03, pp. : 44-52
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
A new test method is presented for the on-field nondestructive measurement of the thermal diffusivity of solid materials. A periodic thermal disturbance is supplied to the inspected material by a thermoelectric source based on the Peltier effect. This can alternate heating and cooling stages and provide, if properly controlled, a harmonic disturbance with null net heat flux. A steady-periodic temperature field can thus be induced within the specimen. The diffusivity of the material is then estimated by monitoring the propagation of the temperature cycles along the optically accessible surface of the specimen, adjacent to the thermal input surface area. A camera for infrared thermography is used for nonintrusive surface temperature measurement. At the current stage of development, the focus is on the accurate reproduction of the theoretical model on which the method is based. Ease of operation and portability of the test equipment are also pursued. However, tests on thin specimens of materials with known properties give measurements in encouraging agreement with the nominal values.
Related content
Review of passive heating/cooling systems of buildings
Energy Science & Engineering, Vol. 4, Iss. 5, 2016-11 ,pp. :
Numerical Heat Transfer Part A: Applications, Vol. 63, Iss. 1, 2013-01 ,pp. :
Efficiencies of CaO/H 2 O/Ca(OH) 2 chemical heat pump for heat storing and heating/cooling
By Ogura H. Yamamoto T. Kage H.
Energy, Vol. 28, Iss. 14, 2003-11 ,pp. :