Author: Khraisheh M.K. Pezeshki C. Bayoumi A.E.
Publisher: Academic Press
ISSN: 0022-460X
Source: Journal of Sound and Vibration, Vol.180, Iss.1, 1995-01, pp. : 67-87
Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.
Abstract
Primary chatter is investigated experimentally using both traditional and frequency domain techniques. The experiment was conducted on a CNC lathe using coated carbide cutting inserts. The tool vibrations and cutting forces were measured and analyzed for different sets of cutting conditions. The experimental results indicated that the tool vibrations are more sensitive to the cutting geometry than the cutting forces. Also, the feed rate was found to be the most critical parameter which leads the system into chaotic behavior. In particular, the wavelet transform technique was used to analyze chatter signals. It clearly identified the transient boundary and the occurrence of the built-up edge (BUE). Based on the frequency information contained in the wavelet transforms, the cutting process is probably quadratically non-linear. In addition, for high feed rate, chaotic behavior was observed. Traditional techniques were also used to study the chaotic behavior of the process. These techniques include phase plane, power spectra, Poincare map and fractal dimensions. They all agreed with the observation obtained by the wavelet transform regarding chaotic motion.
Related content
Entropy-Based Wavelet De-noising Method for Time Series Analysis
By Sang Yan-Fang Wang Dong Wu Ji-Chun Zhu Qing-Ping Wang Ling
Entropy, Vol. 11, Iss. 4, 2009-12 ,pp. :
Wavelet-Based Multi-Scale Entropy Analysis of Complex Rainfall Time Series
Entropy, Vol. 13, Iss. 1, 2011-01 ,pp. :
Chatter Onset in Non-Regenerative Cutting: A Numerical Study
By GRADIŠEK J. Govekar E. Grabec I.
Journal of Sound and Vibration, Vol. 242, Iss. 5, 2001-05 ,pp. :