Microstructural evolution of austenite under conditions simulating thin slab casting and hot direct rolling

ISSN： 1743-2812

Source： Ironmaking & Steelmaking, Vol.28, Iss.3, 2001-06, pp. : 230-236

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

The hot direct rolling (HDR) of thin slabs introduces some new microstructural phenomena with respect to conventional hot rolling of steels. This paper aims to investigate the microstructural changes of as cast austenite under these conditions. Current laboratory techniques for HDR simulation require a freshly cast slab for every experiment and a perfect link between casting and hot deformation. The present work adopted a new approach; the C–Mn steel is substituted by austenitic Fe–30Ni alloy, Conventional reheating before rolling replaces the direct link. The experimental ingot casting of Fe–30Ni alloy resulted in a solidification structure in good agreement with that of thin slabs of C–Mn steels. From metallographic observations, a mixed softening process and a strong grain refinement and homogenisation characterise the microstructural changes during HDR simulation. The microstructural behaviour and the grain refinement measured for the Fe–30Ni alloy is closely comparable with that predicted for C–Mn steels for the same conditions. The steel substitution appears to constitute a suitable and advantageous experimental approach for HDR simulation.