Welding current prediction in GMAW and UGMAW processes using response surface methodology

Author: Shahi A. S.   Pandey S.  

Publisher: Maney Publishing

ISSN: 1743-2936

Source: Science and Technology of Welding & Joining, Vol.11, Iss.3, 2006-05, pp. : 341-346

Disclaimer: Any content in publications that violate the sovereignty, the constitution or regulations of the PRC is not accepted or approved by CNPIEC.

Previous Menu Next

Abstract

Among all process variables in gas metal arc welding (GMAW) process, welding current is the most influential variable affecting heat input and weld quality. Its dependence on other process variables in GMAW and universal gas metal arc welding (UGMAW) processes (which makes use of a specially designed torch to preheat the filler wire independently, before its emergence from the torch) has been investigated using four factor five level central composite rotatable design to develop relationship for predicting welding current, which enables to quantify the direct and interactive effects of four numeric factors, namely wire feedrate, open circuit voltage, welding speed and electrode stickout and one categorical factor preheat current. Mathematical models developed show that welding current increased linearly with increaseing wire feedrate and open circuit voltage, whereas it decreased with increasing electrode stickout and preheat current. Numerical optimisation was carried out, and the optimal solutions generated indicate that under the same input conditions higher deposition rates are achievable in UGMAW process.